In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Validate TA binary size Add TA binary size validation to avoid OOB write. (cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442)

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

In the Linux kernel, the following vulnerability has been resolved: bna: adjust 'name' buf size of bna_tcb and bna_ccb structures To have enough space to write all possible sprintf() args. Currently 'name' size is 16, but the first '%s' specifier may already need at least 16 characters, since 'bnad->netdev->name' is used there. For '%d' specifiers, assume that they require: * 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8 * 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX is 16 And replace sprintf with snprintf. Detected using the static analysis tool - Svace.

Heap-based buffer overflow in the wcnss_wlan_write function in drivers/net/wireless/wcnss/wcnss_wlan.c in the wcnss_wlan device driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact by writing to /dev/wcnss_wlan with an unexpected amount of data.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

A heap out-of-bounds write affecting Linux since v2.6.19-rc1 was discovered in net/netfilter/x_tables.c. This allows an attacker to gain privileges or cause a DoS (via heap memory corruption) through user name space

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix reg_set_min_max corruption of fake_reg Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_o ---truncated---

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Enforce hcall result buffer validity and size plpar_hcall(), plpar_hcall9(), and related functions expect callers to provide valid result buffers of certain minimum size. Currently this is communicated only through comments in the code and the compiler has no idea. For example, if I write a bug like this: long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...); This compiles with no diagnostics emitted, but likely results in stack corruption at runtime when plpar_hcall9() stores results past the end of the array. (To be clear this is a contrived example and I have not found a real instance yet.) To make this class of error less likely, we can use explicitly-sized array parameters instead of pointers in the declarations for the hcall APIs. When compiled with -Warray-bounds[1], the code above now provokes a diagnostic like this: error: array argument is too small; is of size 32, callee requires at least 72 [-Werror,-Warray-bounds] 60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, | ^ ~~~~~~ [1] Enabled for LLVM builds but not GCC for now. See commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and related changes.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prefer nft_chain_validate nft_chain_validate already performs loop detection because a cycle will result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE). It also follows maps via ->validate callback in nft_lookup, so there appears no reason to iterate the maps again. nf_tables_check_loops() and all its helper functions can be removed. This improves ruleset load time significantly, from 23s down to 12s. This also fixes a crash bug. Old loop detection code can result in unbounded recursion: BUG: TASK stack guard page was hit at .... Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1 [..] with a suitable ruleset during validation of register stores. I can't see any actual reason to attempt to check for this from nft_validate_register_store(), at this point the transaction is still in progress, so we don't have a full picture of the rule graph. For nf-next it might make sense to either remove it or make this depend on table->validate_state in case we could catch an error earlier (for improved error reporting to userspace).

In the Linux kernel, the following vulnerability has been resolved: riscv: prevent pt_regs corruption for secondary idle threads Top of the kernel thread stack should be reserved for pt_regs. However this is not the case for the idle threads of the secondary boot harts. Their stacks overlap with their pt_regs, so both may get corrupted. Similar issue has been fixed for the primary hart, see c7cdd96eca28 ("riscv: prevent stack corruption by reserving task_pt_regs(p) early"). However that fix was not propagated to the secondary harts. The problem has been noticed in some CPU hotplug tests with V enabled. The function smp_callin stored several registers on stack, corrupting top of pt_regs structure including status field. As a result, kernel attempted to save or restore inexistent V context.

In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied.

In the Linux kernel, the following vulnerability has been resolved: ecryptfs: Fix buffer size for tag 66 packet The 'TAG 66 Packet Format' description is missing the cipher code and checksum fields that are packed into the message packet. As a result, the buffer allocated for the packet is 3 bytes too small and write_tag_66_packet() will write up to 3 bytes past the end of the buffer. Fix this by increasing the size of the allocation so the whole packet will always fit in the buffer. This fixes the below kasan slab-out-of-bounds bug: BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0 Write of size 1 at addr ffff88800afbb2a5 by task touch/181 CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4c/0x70 print_report+0xc5/0x610 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? kasan_complete_mode_report_info+0x44/0x210 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 kasan_report+0xc2/0x110 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 __asan_store1+0x62/0x80 ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10 ? __alloc_pages+0x2e2/0x540 ? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d] ? dentry_open+0x8f/0xd0 ecryptfs_write_metadata+0x30a/0x550 ? __pfx_ecryptfs_write_metadata+0x10/0x10 ? ecryptfs_get_lower_file+0x6b/0x190 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 ? __pfx_path_openat+0x10/0x10 do_filp_open+0x15e/0x290 ? __pfx_do_filp_open+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? _raw_spin_lock+0x86/0xf0 ? __pfx__raw_spin_lock+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? alloc_fd+0xf4/0x330 do_sys_openat2+0x122/0x160 ? __pfx_do_sys_openat2+0x10/0x10 __x64_sys_openat+0xef/0x170 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f00a703fd67 Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67 RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941 R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040 </TASK> Allocated by task 181: kasan_save_stack+0x2f/0x60 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x25/0x40 __kasan_kmalloc+0xc5/0xd0 __kmalloc+0x66/0x160 ecryptfs_generate_key_packet_set+0x6d2/0xde0 ecryptfs_write_metadata+0x30a/0x550 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 do_filp_open+0x15e/0x290 do_sys_openat2+0x122/0x160 __x64_sys_openat+0xef/0x170 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: use correct buffer size when parsing configfs lists This commit fixes uvc gadget support on 32-bit platforms. Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") introduced a helper function __uvcg_iter_item_entries() to aid with parsing lists of items on configfs attributes stores. This function is a generalization of another very similar function, which used a stack-allocated temporary buffer of fixed size for each item in the list and used the sizeof() operator to check for potential buffer overruns. The new function was changed to allocate the now variably sized temp buffer on heap, but wasn't properly updated to also check for max buffer size using the computed size instead of sizeof() operator. As a result, the maximum item size was 7 (plus null terminator) on 64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just barely enough, 3 is definitely too small for some of UVC configfs attributes. For example, dwFrameInteval, specified in 100ns units, usually has 6-digit item values, e.g. 166666 for 60fps.

There is heap-based buffer overflow in Linux kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.

In the Linux kernel, the following vulnerability has been resolved: net: sched: sch_multiq: fix possible OOB write in multiq_tune() q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur.

There is a vulnerability in the linux kernel versions higher than 5.2 (if kernel compiled with config params CONFIG_BPF_SYSCALL=y , CONFIG_BPF=y , CONFIG_CGROUPS=y , CONFIG_CGROUP_BPF=y , CONFIG_HARDENED_USERCOPY not set, and BPF hook to getsockopt is registered). As result of BPF execution, the local user can trigger bug in __cgroup_bpf_run_filter_getsockopt() function that can lead to heap overflow (because of non-hardened usercopy). The impact of attack could be deny of service or possibly privileges escalation.

In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 [ copy more details from report ]

In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix infinite recursion in fib6_dump_done(). syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

A flaw was found in the fixed buffer registration code for io_uring (io_sqe_buffer_register in io_uring/rsrc.c) in the Linux kernel that allows out-of-bounds access to physical memory beyond the end of the buffer. This flaw enables full local privilege escalation.

In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)

A vulnerability was found in Linux Kernel, where a Heap Overflow was found in mwifiex_set_wmm_params() function of Marvell Wifi Driver.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential memory corruption in __update_iostat_latency() Add iotype sanity check to avoid potential memory corruption. This is to fix the compile error below: fs/f2fs/iostat.c:231 __update_iostat_latency() error: buffer overflow 'io_lat->peak_lat[type]' 3 <= 3 vim +228 fs/f2fs/iostat.c 211 static inline void __update_iostat_latency(struct bio_iostat_ctx *iostat_ctx, 212 enum iostat_lat_type type) 213 { 214 unsigned long ts_diff; 215 unsigned int page_type = iostat_ctx->type; 216 struct f2fs_sb_info *sbi = iostat_ctx->sbi; 217 struct iostat_lat_info *io_lat = sbi->iostat_io_lat; 218 unsigned long flags; 219 220 if (!sbi->iostat_enable) 221 return; 222 223 ts_diff = jiffies - iostat_ctx->submit_ts; 224 if (page_type >= META_FLUSH) ^^^^^^^^^^ 225 page_type = META; 226 227 spin_lock_irqsave(&sbi->iostat_lat_lock, flags); @228 io_lat->sum_lat[type][page_type] += ts_diff; ^^^^^^^^^ Mixup between META_FLUSH and NR_PAGE_TYPE leads to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---

A flaw was found in unrestricted eBPF usage by the BPF_BTF_LOAD, leading to a possible out-of-bounds memory write in the Linux kernel’s BPF subsystem due to the way a user loads BTF. This flaw allows a local user to crash or escalate their privileges on the system.

A flaw was found in the Linux kernel before 5.9-rc4. Memory corruption can be exploited to gain root privileges from unprivileged processes. The highest threat from this vulnerability is to data confidentiality and integrity.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential RX buffer overflow If an event caused firmware to return invalid RX size for LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes. Fix by utilizing min_t().

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers() The last case label can write two buffers 'mc_reg_address[j]' and 'mc_data[j]' with 'j' offset equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE since there are no checks for this value in both case labels after the last 'j++'. Instead of changing '>' to '>=' there, add the bounds check at the start of the second 'case' (the first one already has it). Also, remove redundant last checks for 'j' index bigger than array size. The expression is always false. Moreover, before or after the patch 'table->last' can be equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE and it seems it can be a valid value. Detected using the static analysis tool - Svace.

In the Linux kernel, the following vulnerability has been resolved: ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table which contains invalid physical addresses, with high bits set which fall outside the range of the CPU-s supported physical address range. Calling acpi_os_map_memory() on such an invalid phys address leads to the below WARN_ON in ioremap triggering resulting in an oops/stacktrace. Add code to verify the physical address before calling acpi_os_map_memory() to fix / avoid the oops. [ 1.226900] ioremap: invalid physical address 3001000000000000 [ 1.226949] ------------[ cut here ]------------ [ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f [ 1.226996] Modules linked in: [ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490 [ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f [ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00 [ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286 [ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000 [ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff [ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18 [ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008 [ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000 [ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000 [ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0 [ 1.227167] Call Trace: [ 1.227176] <TASK> [ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370 [ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227288] acpi_init_fpdt+0xa8/0x253 [ 1.227308] ? acpi_debugfs_init+0x1f/0x1f [ 1.227339] do_one_initcall+0x5a/0x300 [ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80 [ 1.227442] kernel_init_freeable+0x28b/0x2cc [ 1.227512] ? rest_init+0x170/0x170 [ 1.227538] kernel_init+0x16/0x140 [ 1.227552] ret_from_fork+0x1f/0x30 [ 1.227639] </TASK> [ 1.227647] irq event stamp: 186819 [ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70 [ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70 [ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227715] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions() If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix space cache corruption and potential double allocations When testing space_cache v2 on a large set of machines, we encountered a few symptoms: 1. "unable to add free space :-17" (EEXIST) errors. 2. Missing free space info items, sometimes caught with a "missing free space info for X" error. 3. Double-accounted space: ranges that were allocated in the extent tree and also marked as free in the free space tree, ranges that were marked as allocated twice in the extent tree, or ranges that were marked as free twice in the free space tree. If the latter made it onto disk, the next reboot would hit the BUG_ON() in add_new_free_space(). 4. On some hosts with no on-disk corruption or error messages, the in-memory space cache (dumped with drgn) disagreed with the free space tree. All of these symptoms have the same underlying cause: a race between caching the free space for a block group and returning free space to the in-memory space cache for pinned extents causes us to double-add a free range to the space cache. This race exists when free space is cached from the free space tree (space_cache=v2) or the extent tree (nospace_cache, or space_cache=v1 if the cache needs to be regenerated). struct btrfs_block_group::last_byte_to_unpin and struct btrfs_block_group::progress are supposed to protect against this race, but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") subtly broke this by allowing multiple transactions to be unpinning extents at the same time. Specifically, the race is as follows: 1. An extent is deleted from an uncached block group in transaction A. 2. btrfs_commit_transaction() is called for transaction A. 3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed ref for the deleted extent. 4. __btrfs_free_extent() -> do_free_extent_accounting() -> add_to_free_space_tree() adds the deleted extent back to the free space tree. 5. do_free_extent_accounting() -> btrfs_update_block_group() -> btrfs_cache_block_group() queues up the block group to get cached. block_group->progress is set to block_group->start. 6. btrfs_commit_transaction() for transaction A calls switch_commit_roots(). It sets block_group->last_byte_to_unpin to block_group->progress, which is block_group->start because the block group hasn't been cached yet. 7. The caching thread gets to our block group. Since the commit roots were already switched, load_free_space_tree() sees the deleted extent as free and adds it to the space cache. It finishes caching and sets block_group->progress to U64_MAX. 8. btrfs_commit_transaction() advances transaction A to TRANS_STATE_SUPER_COMMITTED. 9. fsync calls btrfs_commit_transaction() for transaction B. Since transaction A is already in TRANS_STATE_SUPER_COMMITTED and the commit is for fsync, it advances. 10. btrfs_commit_transaction() for transaction B calls switch_commit_roots(). This time, the block group has already been cached, so it sets block_group->last_byte_to_unpin to U64_MAX. 11. btrfs_commit_transaction() for transaction A calls btrfs_finish_extent_commit(), which calls unpin_extent_range() for the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by transaction B!), so it adds the deleted extent to the space cache again! This explains all of our symptoms above: * If the sequence of events is exactly as described above, when the free space is re-added in step 11, it will fail with EEXIST. * If another thread reallocates the deleted extent in between steps 7 and 11, then step 11 will silently re-add that space to the space cache as free even though it is actually allocated. Then, if that space is allocated *again*, the free space tree will be corrupted (namely, the wrong item will be deleted). * If we don't catch this free space tree corr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix memory corruption on probe Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: debug: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in the buffer overflow (although it's unrealistic). This patch replaces with a safer version, scnprintf() for papering over such a potential issue.

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix buffer overflow in be_get_module_eeprom be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once.

In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]

In the Linux kernel, the following vulnerability has been resolved: arm64: entry: avoid kprobe recursion The cortex_a76_erratum_1463225_debug_handler() function is called when handling debug exceptions (and synchronous exceptions from BRK instructions), and so is called when a probed function executes. If the compiler does not inline cortex_a76_erratum_1463225_debug_handler(), it can be probed. If cortex_a76_erratum_1463225_debug_handler() is probed, any debug exception or software breakpoint exception will result in recursive exceptions leading to a stack overflow. This can be triggered with the ftrace multiple_probes selftest, and as per the example splat below. This is a regression caused by commit: 6459b8469753e9fe ("arm64: entry: consolidate Cortex-A76 erratum 1463225 workaround") ... which removed the NOKPROBE_SYMBOL() annotation associated with the function. My intent was that cortex_a76_erratum_1463225_debug_handler() would be inlined into its caller, el1_dbg(), which is marked noinstr and cannot be probed. Mark cortex_a76_erratum_1463225_debug_handler() as __always_inline to ensure this. Example splat prior to this patch (with recursive entries elided): | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | # echo p do_el0_svc >> /sys/kernel/debug/tracing/kprobe_events | # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable | Insufficient stack space to handle exception! | ESR: 0x0000000096000047 -- DABT (current EL) | FAR: 0xffff800009cefff0 | Task stack: [0xffff800009cf0000..0xffff800009cf4000] | IRQ stack: [0xffff800008000000..0xffff800008004000] | Overflow stack: [0xffff00007fbc00f0..0xffff00007fbc10f0] | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : arm64_enter_el1_dbg+0x4/0x20 | lr : el1_dbg+0x24/0x5c | sp : ffff800009cf0000 | x29: ffff800009cf0000 x28: ffff000002c74740 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 00000000604003c5 x22: ffff80000801745c x21: 0000aaaac95ac068 | x20: 00000000f2000004 x19: ffff800009cf0040 x18: 0000000000000000 | x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 | x11: 0000000000000010 x10: ffff800008c87190 x9 : ffff800008ca00d0 | x8 : 000000000000003c x7 : 0000000000000000 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000043a4 | x2 : 00000000f2000004 x1 : 00000000f2000004 x0 : ffff800009cf0040 | Kernel panic - not syncing: kernel stack overflow | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xe4/0x104 | show_stack+0x18/0x4c | dump_stack_lvl+0x64/0x7c | dump_stack+0x18/0x38 | panic+0x14c/0x338 | test_taint+0x0/0x2c | panic_bad_stack+0x104/0x118 | handle_bad_stack+0x34/0x48 | __bad_stack+0x78/0x7c | arm64_enter_el1_dbg+0x4/0x20 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | do_el0_svc+0x0/0x28 | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x18c/0x190 | Kernel Offset: disabled | CPU features: 0x0080,00005021,19001080 | Memory Limit: none | ---[ end Kernel panic - not syncing: kernel stack overflow ]--- With this patch, cortex_a76_erratum_1463225_debug_handler() is inlined into el1_dbg(), and el1_dbg() cannot be probed: | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | sh: write error: No such file or directory | # grep -w cortex_a76_errat ---truncated---

An issue was found in Linux kernel before 5.5.4. The mwifiex_cmd_append_vsie_tlv() function in drivers/net/wireless/marvell/mwifiex/scan.c allows local users to gain privileges or cause a denial of service because of an incorrect memcpy and buffer overflow, aka CID-b70261a288ea.

In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix a memory corruption iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix disable_managed_interrupts Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled. When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior. Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]---

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter).

In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]

In the Linux kernel before 4.20.12, net/ipv4/netfilter/nf_nat_snmp_basic_main.c in the SNMP NAT module has insufficient ASN.1 length checks (aka an array index error), making out-of-bounds read and write operations possible, leading to an OOPS or local privilege escalation. This affects snmp_version and snmp_helper.

In the Linux Kernel before versions 4.20.8 and 4.19.21 a use-after-free error in the "sctp_sendmsg()" function (net/sctp/socket.c) when handling SCTP_SENDALL flag can be exploited to corrupt memory.