SGE-PLC1000 device, in its 0.9.2b firmware version, does not handle some requests correctly, allowing a remote attacker to inject code into the operating system with maximum privileges.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 contains a command injection via the ussd parameter in the setUssd function.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox 4.2 all versions, FortiSandbox Cloud 5.0.4 through 5.0.5, FortiSandbox PaaS 5.0.4 through 5.0.5 may allow an unauthenticated attacker to execute unauthorized commands via specifically crafted HTTP requests

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Several vulnerabilities affect elFinder 2.1.58. These vulnerabilities can allow an attacker to execute arbitrary code and commands on the server hosting the elFinder PHP connector, even with minimal configuration. The issues were patched in version 2.1.59. As a workaround, ensure the connector is not exposed without authentication.

XikeStor SKS8310-8X Network Switch firmware versions 1.04.B07 and prior contain an OS command injection vulnerability in the /goform/PingTestSet endpoint that allows unauthenticated remote attackers to execute arbitrary operating system commands. Attackers can inject malicious commands through the destIp parameter to achieve remote code execution with root privileges on the network switch.

CONPROSYS HMI System (CHS) Ver.3.4.4?and earlier allows a remote unauthenticated attacker to execute an arbitrary OS command on the server where the product is running by sending a specially crafted request.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the port parameter in the setting/setOpenVpnClientCfg function.

A flaw was found in the REST API in StarWind Stack. REST command, which manipulates a virtual disk, doesn’t check input parameters. Some of them go directly to bash as part of a script. An attacker with non-root user access can inject arbitrary data into the command that will be executed with root privileges. This affects StarWind SAN and NAS v0.2 build 1633.

The unprivileged user portal part of CentOS Web Panel is affected by a Command Injection vulnerability leading to root Remote Code Execution.

An issue was discovered on certain ABUS TVIP cameras. The CGI scripts allow remote attackers to execute code via system() as root. There are several injection points in various scripts.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

WebdriverIO is a test automation framework for unit, e2e and component testing using WebDriver, WebDriver BiDi and Appium. Versions below 9.24.0 contain a command injection vulnerability leading to remote code execution (RCE) in test orchestration. Git permits branch names containing shell metacharacters, and getGitMetadataForAISelection() interpolates these names directly into execSync() calls without sanitization. An attacker can exploit this by supplying a malicious repository (via testOrchestrationOptions.runSmartSelection.source, or the current directory if unset) whose branch name carries a payload, causing the shell to execute arbitrary code. This enables remote code execution on CI/CD servers and developer machines, leading to credential and secret disclosure, source code and SSH key exfiltration, system compromise, and supply chain attacks via tampered build artifacts. The issue has been fixed in version 9.24.0.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 contains a command injection via the hostName parameter in the setOpModeCfg function.

The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument pptpPassThru results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an unauthenticated attacker to achieve remote code execution on the system by sending a crafted request to the libraries installation route and injecting malicious input into the request body.

A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument command results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

D-Link DIR878 1.30B08 Hotfix_04 was discovered to contain a command injection vulnerability via the component /bin/proc.cgi.

A vulnerability was determined in FoundationAgents MetaGPT up to 0.8.1. The affected element is the function Bash.run in the library metagpt/tools/libs/terminal.py. This manipulation causes os command injection. The attack is possible to be carried out remotely. The project was informed of the problem early through a pull request but has not reacted yet.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setNetworkCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument proto results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used.

A command injection vulnerability has been reported to affect License Center. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: License Center 1.9.43 and later

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An unauthenticated command injection vulnerability in the product license validation function of Telos Alliance Omnia MPX Node 1.3.* - 1.4.* allows attackers to execute arbitrary commands via a crafted payload injected into the license input.

The api/ZRIGMP/set_MLD_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the MLD_PROXY_WAN_CONNECT parameter.

LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument mode leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

This affects all versions of package ffmpegdotjs. If attacker-controlled user input is given to the trimvideo function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

A command injection vulnerability exists in Jitsi before commit 8aa7be58522f4264078d54752aae5483bfd854b2 when launching browsers on Windows which could allow an attacker to insert an arbitrary URL which opens up the opportunity to remote execution.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument maxRtrAdvInterval causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

All versions of package git are vulnerable to Remote Code Execution (RCE) due to missing sanitization in the Git.git method, which allows execution of OS commands rather than just git commands. Steps to Reproduce 1. Create a file named exploit.js with the following content: js var Git = require("git").Git; var repo = new Git("repo-test"); var user_input = "version; date"; repo.git(user_input, function(err, result) { console.log(result); }) 2. In the same directory as exploit.js, run npm install git. 3. Run exploit.js: node exploit.js. You should see the outputs of both the git version and date command-lines. Note that the repo-test Git repository does not need to be present to make this PoC work.

A vulnerability has been found in Teledyne FLIR AX8 up to 1.46.16. Affected by this issue is some unknown functionality of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.49.16 can resolve this issue. Upgrading the affected component is advised. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

Cursor is a code editor built for programming with AI. Prior to 2.3, hen the Cursor Agent is running in Auto-Run Mode with Allowlist mode enabled, certain shell built-ins can still be executed without appearing in the allowlist and without requiring user approval. This allows an attacker via indirect or direct prompt injection to poison the shell environment by setting, modifying, or removing environment variables that influence trusted commands. This vulnerability is fixed in 2.3.

A command injection vulnerability has been reported to affect QuNetSwitch. If a remote attacker gains a user account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuNetSwitch 2.0.5.0906 and later

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

All versions of InSAT MasterSCADA BUK-TS are susceptible to OS command injection through a field in its MMadmServ web interface. Malicious users that use the vulnerable endpoint are potentially able to cause remote code execution.

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wanIdx leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with a manual subscription or unsubscription.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with an automatic subscription.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wifiOff leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used.

Plexus-utils before 3.0.16 is vulnerable to command injection because it does not correctly process the contents of double quoted strings.

OS command injection vulnerability in Nako3edit, editor component of nadesiko3 (PC Version) v3.3.74 and earlier allows a remote attacker to obtain appkey of the product and execute an arbitrary OS command on the product.

Several OS command injection vulnerabilities exist in the m2m binary of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is reachable through the m2m's DOWNLOAD_INFO command.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

This affects all versions of package picotts. If attacker-controlled user input is given to the say function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.