Ivanti Cloud Services Appliance (CSA) contains an OS command injection vulnerability in the administrative console which can allow an authenticated attacker with application admin privileges to pass commands to the underlying OS.
As Ivanti CSA has reached End-of-Life status, users are urged to remove CSA 4.6.x from service or upgrade to the 5.0.x line of supported solutions, as future vulnerabilities on the 4.6.x version of CSA are unlikely to receive future security updates.
The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
Multiple vulnerabilities in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to conduct a path traversal or command injection attack on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to do one or both of the following: Execute a command using crafted input Upload a file that has been altered using path traversal techniques A successful exploit could allow the attacker to read and write arbitrary files or execute arbitrary commands as root on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.
A vulnerability in the configuration dashboard of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to execute arbitrary code. This vulnerability is due to insufficient sanitization of configuration entries. An attacker could exploit this vulnerability by logging in as a super admin and entering crafted input to configuration options on the CSPC configuration dashboard. A successful exploit could allow the attacker to execute remote code as root.
Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.
A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0
A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.40, USG FLEX series firmware versions from V4.50 through V5.40, USG FLEX 50(W) series firmware versions from V4.16 through V5.40, and USG20(W)-VPN series firmware versions from V4.16 through V5.40 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on the affected device by passing a crafted string as an argument to a CLI command.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
ThreatSonar Anti-Ransomware developed by TeamT5 has an OS Command Injection vulnerability, allowing remote attackers with product platform intermediate privileges to inject arbitrary OS commands and execute them on the server, thereby gaining administrative access to the remote host.
A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
ActiveX Control(HShell.dll) in Handy Groupware 1.7.3.1 for Windows 7, 8, and 10 allows an attacker to execute arbitrary command via the ShellExec method.
An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.
Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
A command injection vulnerability may be exploited after the admin's authentication on the web portal on Omada gateways.
An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_ac_mode` POST parameter parameter.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
Diagnostics command injection vulnerability
An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.
An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
RG - AP180, Indoor Wall Plate Wireless AP AP180 series provided by Ruijie Networks Co., Ltd. contain an OS command injection vulnerability. An arbitrary OS command may be executed on the product by an attacker who logs in to the CLI service.
Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.
The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.
An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
RiteCMS v3.1.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the parse_special_tags() function.
ChurchCRM is an open-source church management system. In versions prior to 6.5.3, the Database Restore functionality does not validate the content or file extension of uploaded files. As a result, an attacker can upload a web shell file and subsequently upload a .htaccess file to enable direct access to it. Once accessed, the uploaded web shell allows remote code execution (RCE) on the server. Version 6.5.3 fixes the issue.
Array Networks ArrayOS AG before 9.4.5.9 allows command injection, as exploited in the wild in August through December 2025.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
WaveView client allows users to execute restricted set of predefined commands and scripts on the connected WaveStore Server. A malicious attacker with high-privileges is able to execute arbitrary OS commands on the server using path traversal in the showerr script. This issue was fixed in version 6.44.44
Wi-Fi AP UNIT AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B08P and earlier, AC-WAPUM-300 v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B08P and earlier allow an authenticated user with an administrative privilege to execute an arbitrary OS command.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.
MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.
A vulnerability in SonicWall SMA100 appliance allow an authenticated management-user to perform OS command injection using HTTP POST parameters. This vulnerability affected SMA100 Appliance version 10.2.0.2-20sv and earlier.
FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions 17.0.2.36 and above before 17.0.3, the filestore module within the Administrative interface is vulnerable to a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to obtain remote access to the system as an asterisk user. This issue is fixed in version 17.0.3.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)
A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiExtender 7.6.0 through 7.6.3, FortiExtender 7.4.0 through 7.4.7, FortiExtender 7.2 all versions, FortiExtender 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via a specific HTTP request.
A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
MotionEye v0.43.1b4 and before is vulnerable to OS Command Injection in configuration parameters such as image_file_name. Unsanitized user input is written to Motion configuration files, allowing remote authenticated attackers with admin access to achieve code execution when Motion is restarted.
In the backup parameters, a user with high privilege is able to concatenate custom instructions to the backup setup. Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Backup configuration in the administration setup modules) allows OS Command Injection.This issue affects Infra Monitoring: from 25.10.0 before 25.10.2, from 24.10.0 before 24.10.15, from 24.04.0 before 24.04.19.
Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Poller reload setup in the configuration modules) allows OS Command Injection. On the poller parameters page, a user with high privilege is able to concatenate custom instructions into the poller reload command. This issue affects Infra Monitoring: from 24.10.0 before 24.10.13, from 24.04.0 before 24.04.18, from 23.10.0 before 23.10.28.
On Barracuda CloudGen WAN Private Edge Gateway devices before 8 webui-sdwan-1089-8.3.1-174141891, an OS command injection vulnerability exists in /ajax/update_certificate - a crafted HTTP request allows an authenticated attacker to execute arbitrary commands. For example, a name field can contain :password and a password field can contain shell metacharacters.
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.5, FortiWeb 7.4.0 through 7.4.10, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests or CLI commands.
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in WN-7D36QR and WN-7D36QR/UE. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker.
Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.