Diagnostics command injection vulnerability

On Netshield NANO 25 10.2.18 devices, /usr/local/webmin/System/manual_ping.cgi allows OS command injection (after authentication by the attacker) because the system C library function is used unsafely.

A post-authentication command injection vulnerability in the "host" parameter of the diagnostic function in Zyxel VMG4005-B50A firmware versions through V5.15(ABQA.2.2)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator with permissions to use XML API the ability to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. This issue does not impact Prisma Access firewalls.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS command line interface (CLI) enables an authenticated administrator with access to the CLI to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers that have Prisma Access 2.1 firewalls are impacted by this issue.

An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection or cause a recoverable denial of service using a specially crafted file.

An OS command injection vulnerability in Ivanti Cloud Services Appliance versions 4.6 Patch 518 and before allows a remote authenticated attacker to obtain remote code execution. The attacker must have admin level privileges to exploit this vulnerability.

The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).

PTZOptics PT30X-SDI/NDI-xx before firmware 6.3.40 is vulnerable to an OS command injection issue. The camera does not sufficiently validate the ntp_addr configuration value which may lead to arbitrary command execution when ntp_client is started. When chained with CVE-2024-8956, a remote and unauthenticated attacker can execute arbitrary OS commands on affected devices.

PowerPath Management Appliance with versions 3.3 & 3.2*, 3.1 & 3.0* contains OS Command Injection vulnerability. An authenticated remote attacker with administrative privileges could potentially exploit the issue and execute commands on the system as the root user.

Authenticated Remote Code Execution in Altalink, Versalink & WorkCentre Products.

The ImageMagick Engine ImageMagick Engine WordPress plugin before 1.7.11 for WordPress is vulnerable to OS Command Injection via the "cli_path" parameter. This allows authenticated attackers, with administrator-level permission to execute arbitrary OS commands on the server leading to remote code execution.

Certain models of routers from Billion Electric has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject arbitrary system commands into a specific SSH function and execute them on the device.

A high privileged remote attacker can execute arbitrary system commands via GET requests due to improper neutralization of special elements used in an OS command.

IBM DevOps Deploy 8.0 through 8.0.1.4, 8.1 through 8.1.0.0 / IBM UrbanCode Deploy 7.0 through 7.0.5.25, 7.1 through 7.1.2.21, 7.2 through 7.2.3.14, and 7.3 through 7.3.2.9 could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.

RiteCMS v3.1.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the parse_special_tags() function.

Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter.

A command injection vulnerability may be exploited after the admin's authentication on the web portal on Omada gateways.

OS command injection in Ivanti Endpoint Manager Mobile (EPMM) before version 12.5.0.2,12.4.0.3 and 12.3.0.3 allows a remote authenticated attacker with high privileges to achieve remote code execution

An authenticated Remote Code Execution (RCE) vulnerability exists in the AirWave CLI. Successful exploitation of this vulnerability could allow a remote authenticated threat actor to run arbitrary commands as a privileged user on the underlying host.

Openfind Mail2000 does not properly filter parameters of specific API. Remote attackers with administrative privileges can exploit this vulnerability to execute arbitrary system commands on the remote server.

A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been classified as critical. Affected is an unknown function of the file /view/vpn/autovpn/online.php. The manipulation of the argument peernode leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-266244. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiIsolator before version 2.4.6 allows a privileged attacker with super-admin profile and CLI access to execute unauthorized code via specifically crafted HTTP requests.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in AE1021 firmware versions 2.0.10 and earlier and AE1021PE firmware versions 2.0.10 and earlier, which may allow a logged-in user to execute an arbitrary OS command using a crafted HTTP request.

RG - AP180, Indoor Wall Plate Wireless AP AP180 series provided by Ruijie Networks Co., Ltd. contain an OS command injection vulnerability. An arbitrary OS command may be executed on the product by an attacker who logs in to the CLI service.

A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.6.028 and later

A remote execution of arbitrary commands vulnerability was discovered in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): Aruba AOS-CX firmware: 10.04.xxxx - versions prior to 10.04.3070, 10.05.xxxx - versions prior to 10.05.0070, 10.06.xxxx - versions prior to 10.06.0110, 10.07.xxxx - versions prior to 10.07.0001. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

A vulnerability was found in Ruijie RG-UAC up to 20240516 and classified as critical. This issue affects some unknown processing of the file /view/systemConfig/sys_user/user_commit.php. The manipulation of the argument email2/user_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266243. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OS command injection in Ivanti Endpoint Manager Mobile (EPMM) before version 12.5.0.2 allows a remote authenticated attacker with high privileges to achieve remote code execution

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in DDNS Record functionality in Synology Router Manager (SRM) before 1.3.1-9346-11 allows remote authenticated users with administrator privileges to execute arbitrary code via unspecified vectors.

ChurchCRM is an open-source church management system. In versions prior to 6.5.3, the Database Restore functionality does not validate the content or file extension of uploaded files. As a result, an attacker can upload a web shell file and subsequently upload a .htaccess file to enable direct access to it. Once accessed, the uploaded web shell allows remote code execution (RCE) on the server. Version 6.5.3 fixes the issue.

Array Networks ArrayOS AG before 9.4.5.9 allows command injection, as exploited in the wild in August through December 2025.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "lan_apply" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "basic_htm" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "applications_apply" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "certificate_file_remove" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "mp_apply" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "scan_ap" API which are not properly sanitized before being concatenated to OS level commands.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiManager Cloud 7.6.0 through 7.6.1, FortiManager Cloud 7.4.0 through 7.4.4, FortiManager Cloud 7.2.2 through 7.2.7, FortiManager 7.6.0 through 7.6.1, FortiManager 7.4.0 through 7.4.5, FortiManager 7.2.1 through 7.2.8 may allow an authenticated remote attacker to execute unauthorized code via FGFM crafted requests.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "multiple_ssid_htm" API which are not properly sanitized before being concatenated to OS level commands.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The source of the vulnerability relies on multiple parameters belonging to the "sta_log_htm" API which are not properly sanitized before being concatenated to OS level commands.

An improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb 7.4.0 through 7.6.0 allows attacker to execute unauthorized code or commands via crafted input.

WaveView client allows users to execute restricted set of predefined commands and scripts on the connected WaveStore Server. A malicious attacker with high-privileges is able to execute arbitrary OS commands on the server using path traversal in the showerr script. This issue was fixed in version 6.44.44

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] in FortiManager version 7.6.0, version 7.4.4 and below, version 7.2.7 and below, version 7.0.12 and below, version 6.4.14 and below and FortiManager Cloud version 7.4.4 and below, version 7.2.7 to 7.2.1, version 7.0.12 to 7.0.1 may allow an authenticated remote attacker to execute unauthorized code via FGFM crafted requests.

Vivotek IP7137 camera with firmware version 0200a is vulnerable to command injection. Parameter "system_ntpIt" used by "/cgi-bin/admin/setparam.cgi" endpoint is not sanitized properly, allowing a user with administrative privileges to perform an attack. Due to CVE-2025-66050, administrative access is not protected by default,  The vendor has not replied to the CNA Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.

The NTP Server configuration function of the IP camera device is not verified with special parameters. Remote attackers can perform a command Injection attack and execute arbitrary commands after logging in with the privileged permission.

OS command injection in the admin web console of Ivanti CSA before version 5.0.5 allows a remote authenticated attacker with admin privileges to achieve remote code execution.