Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

D-Link DSL-3782 EU v1.01:EU v1.03 is affected by a buffer overflow which can cause a denial of service. This vulnerability exists in the web interface "/cgi-bin/New_GUI/Igmp.asp". Authenticated remote attackers can trigger this vulnerability by sending a long string in parameter 'igmpsnoopEnable' via an HTTP request.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the f_ipv6_enable parameter at /bsc_ipv6. This vulnerability is exploited via a crafted POST request.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the component /adv_resource. This vulnerability is exploited via a crafted GET request.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the inet_ntoa() function.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the acStack_50 parameter.

D-Link DIR-842 fw_revA_1-02_eu_multi_20151008 was discovered to contain multiple buffer overflows in the fgets function via the acStack_120 and acStack_220 parameters.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function fgets.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the FUN_0000acb4 function.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function FUN_0001be68.

A buffer overflow in D-Link DIR-615 C2 3.03WW. The ping_ipaddr parameter in ping_response.cgi POST request allows an attacker to crash the webserver and might even gain remote code execution.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the HostName field in SetParentsControlInfo.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the HNAP_AUTH HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12065.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12066.

D-Link DIR-868L Hardware version A1, firmware version 1.12 is vulnerable to Buffer Overflow. The vulnerability is in scandir.sgi binary.

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

D-Link DIR3060 DIR3060A1_FW111B04.bin is vulnerable to Buffer Overflow.

D-LINK DI-8100 16.07.26A1 is vulnerable to Buffer Overflow in the ipsec_road_asp function via the host_ip parameter.

D-LINK DI-8100 16.07.26A1 is vulnerable to Buffer Overflow in the ipsec_net_asp function via the remot_ip parameter.

D-Link DCS-5220 devices have a buffer overflow. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

D-LINK DI-8003 v16.07.16A1 was discovered to contain a buffer overflow via the notify parameter in the arp_sys_asp function.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the host_ip parameter in the ipsec_road_asp function.

DI-8100 v16.07.26A1 is vulnerable to Buffer Overflow In the ip_position_asp function via the ip parameter.

D-LINK DI-8003 v16.07.16A1 was discovered to contain a buffer overflow via the fn parameter in the tgfile_htm function.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

D-Link DIR-820L 1.05B03 has a stack overflow vulnerability in the sub_451208 function.

A vulnerability was discovered in DI_8200-16.07.26A1, There is a buffer overflow in the dbsrv_asp function; The strcpy function is executed without checking the length of the string, leading to a buffer overflow.

In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

A Buffer overflow vulnerability in D-Link DAP-2555 REVA_FIRMWARE_1.20 allows remote attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A Stack overflow vulnerability in D-Link DCS-932L REVB_FIRMWARE_2.18.01 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via goform/formWPS, allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."

A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via formWlanGuestSetup allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."

Dlink Dir-3040us A1 1.20b03a hotfix is vulnerable to Buffer Overflow. Any user having read/write access to ftp server can write directly to ram causing buffer overflow if file or files uploaded are greater than available ram. Ftp server allows change of directory to root which is one level up than root of usb flash directory. During upload ram is getting filled and causing system resource exhaustion (no free memory) which causes system to crash and reboot.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the URL field in SetParentsControlInfo.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DIR-600M C1 3.08. Affected by this issue is some unknown functionality of the component Telnet Service. The manipulation of the argument username leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-254576. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Buffer Overflow vulnerability in D-Link DSR-150, DSR-150N, DSR-250, DSR-250N, DSR-500N, DSR-1000N from 3.13 to 3.17B901C allows unauthenticated users to execute remote code execution.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,

D-Link DSL-3782 v1.01 is vulnerable to Buffer Overflow in /New_GUI/ParentalControl.asp.

In D-Link DAP1650 v1.04 firmware, the fileaccess.cgi program in the firmware has a buffer overflow vulnerability caused by strncpy.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 & GO-RT-AC750_revB_FWv200b02 is vulnerable to Buffer Overflow via authenticationcgi_main.

D-Link DIR820LA1_FW106B02 was discovered to contain a buffer overflow via the nextPage parameter at ping.ccp.

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

A buffer overflow vulnerability exists in Windows File Resource Profiles in 9.X allows a remote authenticated user with privileges to browse SMB shares to execute arbitrary code as the root user. As of version 9.1R3, this permission is not enabled by default.

Multiple instances of incorrect calculation of buffer size in the Webmail and Administrative interface of FortiMail before 6.4.5 may allow an authenticated attacker with regular webmail access to trigger a buffer overflow and to possibly execute unauthorized code or commands via specifically crafted HTTP requests.

Buffer overflow in the password management functionality in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a crafted key file.

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to memcpy. An attacker can send a malicious packet to trigger this vulnerability.

Heap-based buffer overflow in the Local Security Authority Subsystem Service (LSASS), as used in Active Directory in Microsoft Windows Server 2003 SP2 and Windows Server 2008 Gold, SP2, and R2; Active Directory Application Mode (ADAM) in Windows XP SP2 and SP3 and Windows Server 2003 SP2; and Active Directory Lightweight Directory Service (AD LDS) in Windows Vista SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7, allows remote authenticated users to execute arbitrary code via malformed LDAP messages, aka "LSASS Heap Overflow Vulnerability."

A vulnerability, which was classified as critical, was found in TOTOLINK A702R 4.0.0-B20230721.1521. Affected is an unknown function of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Buffer overflow in the FTP Service in Microsoft Internet Information Services (IIS) 5.0 through 6.0 allows remote authenticated users to execute arbitrary code via a crafted NLST (NAME LIST) command that uses wildcards, leading to memory corruption, aka "IIS FTP Service RCE and DoS Vulnerability."