An issue was discovered in Suricata 4.1.3. The code mishandles the case of sending a network packet with the right type, such that the function DecodeEthernet in decode-ethernet.c is executed a second time. At this point, the algorithm cuts the first part of the packet and doesn't determine the current length. Specifically, if the packet is exactly 28 long, in the first iteration it subtracts 14 bytes. Then, it is working with a packet length of 14. At this point, the case distinction says it is a valid packet. After that it casts the packet, but this packet has no type, and the program crashes at the type case distinction.
An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A buffer overflow vulnerability exists in the router's web server (httpd). When processing the page parameters for a post request, the value is directly written with sprintf to a local variable placed on the stack, which overrides the return address of the function, a causing buffer overflow.
Buffer access with incorrect length value vulnerability in GOT2000 series GT27 model communication driver versions 01.19.000 through 01.38.000, GT25 model communication driver versions 01.19.000 through 01.38.000, GT23 model communication driver versions 01.19.000 through 01.38.000 and GT21 model communication driver versions 01.21.000 through 01.39.000, GOT SIMPLE series GS21 model communication driver versions 01.21.000 through 01.39.000, GT SoftGOT2000 versions 1.170C through 1.250L and Tension Controller LE7-40GU-L Screen package data for MODBUS/TCP V1.00 allows a remote unauthenticated attacker to stop the communication function of the products via specially crafted packets.
Rockwell Automation RSLinx Classic Versions 4.00.01 and prior. This vulnerability may allow a remote, unauthenticated threat actor to intentionally send a malformed CIP packet to Port 44818, causing the RSLinx Classic application to terminate. The user will need to manually restart the software to regain functionality.
Heap-based buffer overflow vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.
An issue has been discovered in Bento4 1.5.1-624. A SEGV can occur in AP4_Processor::ProcessFragments in Core/Ap4Processor.cpp.
Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1969.
A vulnerability has been found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr/url/vpnPassword/vpnUser leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
Off-by-one error in the __imlib_MergeUpdate function in lib/updates.c in imlib2 before 1.4.9 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via crafted coordinates.
Out-of-bounds write vulnerability in the RSMC module. Impact: Successful exploitation of this vulnerability will affect availability.
An out-of-memory flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFRasterScanlineSize64() API. This flaw allows a remote attacker to cause a denial of service via a crafted input with a size smaller than 379 KB.
A segment fault (SEGV) flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFReadRGBATileExt() API. This flaw allows a remote attacker to cause a heap-buffer overflow, leading to a denial of service.
An issue has been found in Bento4 1.5.1-624. It is a SEGV in AP4_StcoAtom::AdjustChunkOffsets in Core/Ap4StcoAtom.cpp.
A Buffer Overflow issue was discovered in Asterisk through 13.19.1, 14.x through 14.7.5, and 15.x through 15.2.1, and Certified Asterisk through 13.18-cert2. When processing a SUBSCRIBE request, the res_pjsip_pubsub module stores the accepted formats present in the Accept headers of the request. This code did not limit the number of headers it processed, despite having a fixed limit of 32. If more than 32 Accept headers were present, the code would write outside of its memory and cause a crash.
In BIG-IP Versions 16.1.x before 16.1.2.2, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5, and all versions of 13.1.x, when a BIG-IP LTM Client SSL profile is configured on a virtual server to perform client certificate authentication with session tickets enabled, undisclosed requests cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
Transient DOS due to buffer over-read in WLAN while parsing WLAN CSA action frames.
A buffer overflow vulnerability in Fortinet FortiOS 6.0.0 through 6.0.4, 5.6.0 through 5.6.7, 5.4 and earlier versions and FortiProxy 2.0.0, 1.2.8 and earlier versions under SSL VPN web portal allows a non-authenticated attacker to perform a Denial-of-service attack via special craft message payloads.
A flaw was found in privoxy before 3.0.32. A invalid read of size two may occur in chunked_body_is_complete() leading to denial of service.
An issue has been found in Bento4 1.5.1-624. It is a SEGV in AP4_StszAtom::GetSampleSize in Core/Ap4StszAtom.cpp.
The sensor module has an out-of-bounds access vulnerability.Successful exploitation of this vulnerability may affect availability.
The fill_xrgb32_lerp_opaque_spans function in cairo-image-compositor.c in cairo before 1.14.2 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a negative span length.
Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the function formSetAccessCodeInfo.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_004137a4.
A potential vulnerability was found in 32-bit builds where an integer overflow during the conversion of scripts to an internal UTF-16 representation could result in allocating a buffer too small for the conversion. This leads to a possible out-of-bounds write. *Note: 64-bit builds are not vulnerable to this issue.*. This vulnerability affects Firefox < 63, Firefox ESR < 60.3, and Thunderbird < 60.3.
Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the listN parameter in the function fromDhcpListClient.
In Dell EMC NetWorker versions prior to 9.2.1.1, versions prior to 9.1.1.6, 9.0.x, and versions prior to 8.2.4.11, the 'nsrd' daemon causes a buffer overflow condition when handling certain messages. A remote unauthenticated attacker could potentially exploit this vulnerability to cause a denial of service to the users of NetWorker systems.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the command parameter in the function FUN_0041cc88.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_00412ef4.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_0041880c.
The NumberUtil.toBigDecimal method in hutool-core v5.8.23 was discovered to contain a stack overflow.
Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the function formSetCfm.
A stack overflow in the function DM_ In fillobjbystr() of TP-Link Archer C50&A5(US)_V5_200407 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
Dell EMC ScaleIO, versions prior to 2.5, do not properly handle some packet data in the MDM service. As a result, a remote attacker could potentially send specifically crafted packet data to the MDM service causing it to crash.
Tenda M3 V1.0.0.12 was discovered to contain a stack overflow via the function formGetPassengerAnalyseData.
Tenda AC Series Router AC18_V15.03.05.19(6318) was discovered to contain a stack-based buffer overflow in the httpd module when handling /goform/WifiExtraSet request.
In all versions of Node.js prior to 6.14.4, 8.11.4 and 10.9.0 when used with UCS-2 encoding (recognized by Node.js under the names `'ucs2'`, `'ucs-2'`, `'utf16le'` and `'utf-16le'`), `Buffer#write()` can be abused to write outside of the bounds of a single `Buffer`. Writes that start from the second-to-last position of a buffer cause a miscalculation of the maximum length of the input bytes to be written.
Buffer overflow in OPC UA applications allows remote attackers to trigger a stack overflow with carefully structured requests.
A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formMultiAPVLAN of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
procps-ng before version 3.3.15 is vulnerable to a denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maps a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service).
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the desc parameter in the function FUN_00413be4.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the cloneMac parameter in the function FUN_0041af40.
This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the Add Downstream Frequency parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system. Successful exploitation of this vulnerability could allow the attacker to perform a Denial of Service (DoS) attack on the targeted system.
TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the url parameter in the function FUN_00418540.
A memory corruption issue was addressed with improved memory handling. This issue is fixed in macOS Catalina 10.15.6. A remote attacker may cause an unexpected application termination.
Tenda AX1806 v1.0.0.1 was discovered to contain a stack overflow via the shareSpeed parameter in the function fromSetWifiGusetBasic. This vulnerability allows attackers to cause a Denial of Service (DoS).
By overlong input values an attacker may force overwrite of the internal program stack in SAP Web Dispatcher - versions 7.53, 7.77, 7.81, 7.85, 7.86, or Internet Communication Manager - versions KRNL64NUC 7.22, 7.22EXT, 7.49, KRNL64UC 7.22, 7.22EXT, 7.49, 7.53, KERNEL 7.22, 7.49, 7.53, 7.77, 7.81, 7.85, 7.86, which makes these programs unavailable, leading to denial of service.
An issue was discovered in Libav 12.3. A read access violation in the mov_probe function in libavformat/mov.c allows remote attackers to cause a denial of service (application crash), as demonstrated by avconv.
In GNOME Epiphany before 41.4 and 42.x before 42.2, an HTML document can trigger a client buffer overflow (in ephy_string_shorten in the UI process) via a long page title. The issue occurs because the number of bytes for a UTF-8 ellipsis character is not properly considered.
There is Memory corruption in the web interface of Moxa OnCell G3470A-LTE Series version 1.6 Build 18021314 and prior, a different vulnerability than CVE-2018-11425.