A flaw has been found in D-Link DWR-M960 1.01.07. Affected by this issue is the function sub_468D64 of the file /boafrm/formDhcpv6s. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability was found in D-Link DWR-M960 1.01.07. This vulnerability affects the function sub_460F30 of the file /boafrm/formDateReboot of the component Scheduled Reboot Configuration Endpoint. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

A vulnerability was determined in D-Link DWR-M960 1.01.07. Affected by this issue is the function sub_423E00 of the file /boafrm/formPortFw of the component Port Forwarding Configuration Endpoint. This manipulation of the argument submit-url causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability affects Firefox < 148, Firefox ESR < 115.33, Firefox ESR < 140.8, Thunderbird < 148, and Thunderbird < 140.8.

A vulnerability was found in D-Link DWR-M960 1.01.07. This issue affects the function sub_46385C of the file /boafrm/formDosCfg. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

Diagnostics functionality on D-Link DSL-3782 devices with firmware EU v. 1.01 has a buffer overflow, allowing authenticated remote attackers to execute arbitrary code via a long Addr value to the 'set Diagnostics_Entry' function in an HTTP request, related to /userfs/bin/tcapi.

NoteBurner 2.35 contains a buffer overflow vulnerability in the license code input field that allows attackers to crash the application. Attackers can generate a 6000-byte payload and paste it into the 'Name' and 'Code' fields to trigger an application crash.

A vulnerability has been found in D-Link DWR-M960 1.01.07. Affected is the function sub_4648F0 of the file /boafrm/formDdns of the component DDNS Settings Handler. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in D-Link DWR-M960 1.01.07. Affected by this vulnerability is the function sub_44E0F8 of the file /boafrm/formNewSchedule. Performing a manipulation of the argument url results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

Incorrect boundary conditions in the Networking: JAR component. This vulnerability affects Firefox < 148, Firefox ESR < 140.8, Thunderbird < 148, and Thunderbird < 140.8.

A vulnerability has been found in D-Link DWR-M960 1.01.07. This vulnerability affects the function sub_462590 of the file /boafrm/formOpMode of the component Operation Mode Configuration Endpoint. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in D-Link DWR-M960 1.01.07. This affects the function sub_462E14 of the file /boafrm/formSysLog of the component System Log Configuration Endpoint. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

The GarminOS TVM component in CIQ API version 1.0.0 through 4.1.7 is vulnerable to various buffer overflows when loading binary resources. A malicious application embedding specially crafted resources could hijack the execution of the device's firmware.

Out-of-bounds Write, Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in azerothcore azerothcore-wotlk (deps/zlib modules). This vulnerability is associated with program files inflate.C. This issue affects azerothcore-wotlk: through v4.0.0.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.

PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a buffer overflow vulnerability exists in PJNATH ICE Session when processing credentials with excessively long usernames.

The `Toybox.Cryptography.Cipher.initialize` API method in CIQ API version 3.0.0 through 4.1.7 does not validate its parameters, which can result in buffer overflows when copying data. A malicious application could call the API method with specially crafted parameters and hijack the execution of the device's firmware.

The `Toybox.Ant.GenericChannel.enableEncryption` API method in CIQ API version 3.2.0 through 4.1.7 does not validate its parameter, which can result in buffer overflows when copying various attributes. A malicious application could call the API method with specially crafted object and hijack the execution of the device's firmware.

A security vulnerability has been detected in Open5GS up to 2.7.6. Impacted is an unknown function of the file /src/mme/esm-build.c of the component MME. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

Vulnerability in root-project root (builtins/zlib modules). This vulnerability is associated with program files inffast.C. This issue affects root.

Adobe Flash Player before 18.0.0.352 and 19.x through 21.x before 21.0.0.242 on Windows and OS X and before 11.2.202.621 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-1096, CVE-2016-1098, CVE-2016-1099, CVE-2016-1100, CVE-2016-1102, CVE-2016-1104, CVE-2016-4109, CVE-2016-4111, CVE-2016-4112, CVE-2016-4113, CVE-2016-4114, CVE-2016-4115, CVE-2016-4120, CVE-2016-4160, CVE-2016-4161, and CVE-2016-4162.

An issue was discovered in the base64d function in the SMTP listener in Exim before 4.90.1. By sending a handcrafted message, a buffer overflow may happen. This can be used to execute code remotely.

Sofia-SIP is an open-source SIP User-Agent library, compliant with the IETF RFC3261 specification. In affected versions Sofia-SIP **lacks both message length and attributes length checks** when it handles STUN packets, leading to controllable heap-over-flow. For example, in stun_parse_attribute(), after we get the attribute's type and length value, the length will be used directly to copy from the heap, regardless of the message's left size. Since network users control the overflowed length, and the data is written to heap chunks later, attackers may achieve remote code execution by heap grooming or other exploitation methods. The bug was introduced 16 years ago in sofia-sip 1.12.4 (plus some patches through 12/21/2006) to in tree libs with git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3774 d0543943-73ff-0310-b7d9-9358b9ac24b2. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Buffer overflow in the collector.exe listener of the Landesk Management Suite 10.0.0.271 and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary code via a large packet.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A weakness has been identified in Open5GS up to 2.7.6. This issue affects the function sgwc_s5c_handle_create_session_response of the component SGW-C. Executing a manipulation can lead to memory corruption. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

An issue was discovered in mj2/opj_mj2_extract.c in OpenJPEG 2.3.0. The output prefix was not checked for length, which could overflow a buffer, when providing a prefix with 50 or more characters on the command line.

Stack-based buffer overflow in IBM Informix Dynamic Server (IDS) 11.50 before 11.50.xC9W2 and 11.70 before 11.70.xC5 allows remote authenticated users to execute arbitrary code via crafted arguments in a SET COLLATION statement.

A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable.

There are buffer overflow vulnerabilities in multiple underlying operating system processes that could lead to unauthenticated remote code execution by sending specially crafted packets via the PAPI protocol. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Multiple models of the Uniview IP Camera (e.g., IPC_G6103 B6103.16.10.B25.201218, IPC_G61, IPC21, IPC23, IPC32, IPC36, IPC62, and IPC_HCMN) offer an undocumented UDP service on port 7788 that allows a remote unauthenticated attacker to overflow an internal buffer and achieve code execution. By using this buffer overflow, a remote attacker can start the telnetd service. This service has a hardcoded default username and password (root/123456). Although it has a restrictive shell, this can be easily bypassed via the built-in ECHO shell command.

Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, and Windows 10 Gold, 1511, and 1607 allow remote authenticated users to execute arbitrary code by leveraging a domain account to make a crafted request, aka "Windows Remote Code Execution Vulnerability."

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

A buffer overflow vulnerability exist in the web-based GUI of Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow an unauthenticated, remote attacker to execute arbitrary code.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is a Hidden Root Shell by entering the administrator password in conjunction with the 'service start-shell' CLI command.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formP2PLimitConfig. Performing a manipulation of the argument except results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT HiPER 810G up to 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formFireWall of the component Management Interface. The manipulation of the argument GroupName results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An Buffer Overflow vulnerability leading to remote code execution was discovered in MEX01. Remote attackers can use this vulnerability by using the property that the target program copies parameter values to memory through the strcpy() function.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in IP-COM W30AP up to 1.0.0.11(1340). Affected by this issue is the function R7WebsSecurityHandler of the file /goform/wx3auth of the component POST Request Handler. The manipulation of the argument data results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The parse_string function in cjson.c in the cJSON library mishandles UTF8/16 strings, which allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a non-hex character in a JSON string, which triggers a heap-based buffer overflow.