An exploitable buffer overflow vulnerabilities exist in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub with Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "callbackUrl" value in order to exploit this vulnerability.

A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

coders/psd.c in ImageMagick allows remote attackers to have unspecified impact by leveraging an improper cast, which triggers a heap-based buffer overflow.

Off-by-one vulnerability in the fgetwln function in libbsd before 0.8.2 allows attackers to have unspecified impact via unknown vectors, which trigger a heap-based buffer overflow.

This issue is fixed in SCSSU-201801. A potential stack based buffer overflow existed in GemaltoKeyHandle.cpp.

The NSPLookupServiceNext function in the client in Microsoft Forefront Threat Management Gateway (TMG) 2010 allows remote attackers to execute arbitrary code via vectors involving unspecified requests, aka "TMG Firewall Client Memory Corruption Vulnerability."

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 64 bytes. An attacker can send an arbitrarily long "bucket" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerabilities exist in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub with Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "correlationId" value in order to exploit this vulnerability.

An out-of-bounds write vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to memory corruption. An attacker can send a network request to trigger this vulnerability.

Buffer overflow in PJSUA API when calling pjsua_call_dump. An attacker-controlled 'buffer' argument may cause a buffer overflow, since supplying an output buffer smaller than 128 characters may overflow the output buffer, regardless of the 'maxlen' argument supplied

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 160 bytes. An attacker can send an arbitrarily long "directory" value in order to exploit this vulnerability.

Multiple exploitable buffer overflow vulnerabilities exist in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. A strncpy overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

Buffer Overflow vulnerability in tvnviewer.exe of TightVNC Viewer allows a remote attacker to execute arbitrary instructions via a crafted FramebufferUpdate packet from a VNC server.

An exploitable buffer overflow vulnerability exists in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 Firmware version 0.20.17. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long 'endTime' value in order to exploit this vulnerability. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy overflows the destination buffer, which has a size of 2,000 bytes. An attacker can send an arbitrarily long "sessionToken" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "startTime" value in order to exploit this vulnerability.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process insecurely extracts the fields from the "shard" table of its SQLite database, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. The strcpy call overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the Samsung WifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "password" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts the videoHostUrl field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable buffer overflow vulnerability exists in the Samsung WifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "cameraIp" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 128 bytes. An attacker can send an arbitrarily long "secretKey" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the camera "create" feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts the "state" field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable buffer overflow vulnerability exists in the remote video-host communication of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process insecurely parses the AWSELB cookie while communicating with remote video-host servers, leading to a buffer overflow on the heap. An attacker able to impersonate the remote HTTP servers could trigger this vulnerability.

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

An improper input validation vulnerability in sdfffd_parse_chunk_FVER() in libsdffextractor library prior to SMR MAY-2021 Release 1 allows attackers to execute arbitrary code on mediaextractor process.

Out-of-bounds Write, Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in azerothcore azerothcore-wotlk (deps/zlib modules). This vulnerability is associated with program files inflate.C. This issue affects azerothcore-wotlk: through v4.0.0.

Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.

scheme/webauthn.c in Glewlwyd SSO server through 2.5.3 has a buffer overflow during FIDO2 signature validation in webauthn registration.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

Boa through 0.94.14rc21 allows remote attackers to trigger an out-of-memory (OOM) condition because malloc is mishandled.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.0) software. The sem Trustlet has a buffer overflow that leads to arbitrary TEE code execution. The Samsung IDs are SVE-2018-13230, SVE-2018-13231, SVE-2018-13232, SVE-2018-13233 (December 2018).

An issue was discovered in several Bosch Smart Home cameras (360 degree indoor camera and Eyes outdoor camera) with firmware before 6.52.4. A malicious client could potentially succeed in the unauthorized execution of code on the device via the network interface, because there is a buffer overflow in the RCP+ parser of the web server.

VMware Workstation 8.x before 8.0.3, VMware Player 4.x before 4.0.3, VMware Fusion 4.x through 4.1.2, VMware ESXi 3.5 through 5.0, and VMware ESX 3.5 through 4.1 do not properly configure the virtual floppy device, which allows guest OS users to cause a denial of service (out-of-bounds write operation and VMX process crash) or possibly execute arbitrary code on the host OS by leveraging administrative privileges on the guest OS.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is incorrect usage of shared memory in the vaultkeeper Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12855 (October 2018).

OpenConnect 8.09 has a buffer overflow, causing a denial of service (application crash) or possibly unspecified other impact, via crafted certificate data to get_cert_name in gnutls.c.

An issue was discovered on Samsung mobile devices with software through 2017-11-03 (S.LSI modem chipsets). The Exynos modem chipset has a baseband buffer overflow. The Samsung ID is SVE-2017-10745 (January 2018).

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is an array overflow in a driver's input booster. The Samsung ID is SVE-2017-11816 (August 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is a Buffer overflow in the esecomm Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12852 (October 2018).

An issue was discovered on Samsung mobile devices with M(6.0) (Exynos or MediaTek chipsets) software. There is a buffer overflow in a Trustlet that can cause memory corruption. The Samsung ID is SVE-2018-11599 (July 2018).

Stack-based buffer overflow in the NSFComputeEvaluateExt function in Nnotes.dll in IBM Lotus Domino 8.5.2 allows remote authenticated users to execute arbitrary code via a long tHPRAgentName parameter in an fmHttpPostRequest OpenForm action to WebAdmin.nsf.

Integer overflow in Git before 2.7.4 allows remote attackers to execute arbitrary code via a (1) long filename or (2) many nested trees, which triggers a heap-based buffer overflow.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 and later QTS 5.0.0: QVR Guard 2.1.3.0 and later

An issue was discovered in Qt before 5.11.3. QBmpHandler has a buffer overflow via BMP data.

Buffer Overflow vulnerability in certain ABUS TVIP cameras allows attackers to gain control of the program via crafted string sent to sprintf() function.