An exploitable buffer overflow vulnerability exists in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 Firmware version 0.20.17. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long 'endTime' value in order to exploit this vulnerability. An attacker can send an HTTP request to trigger this vulnerability.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process insecurely extracts the fields from the "shard" table of its SQLite database, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. The strcpy call overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 160 bytes. An attacker can send an arbitrarily long "directory" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "startTime" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the Samsung WifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "password" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 32 bytes. An attacker can send an arbitrarily long "accessKey" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerabilities exist in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub with Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "callbackUrl" value in order to exploit this vulnerability.

Multiple exploitable buffer overflow vulnerabilities exist in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. A strncpy overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerabilities exist in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub with Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "correlationId" value in order to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the Samsung WifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "cameraIp" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy overflows the destination buffer, which has a size of 2,000 bytes. An attacker can send an arbitrarily long "sessionToken" value in order to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Buffer overflow in Active Management Technology (AMT) in Intel Manageability Engine Firmware 8.x/9.x/10.x/11.0/11.5/11.6/11.7/11.10/11.20 allows attacker with remote Admin access to the system to execute arbitrary code with AMT execution privilege.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in multiple parameters of the Document Boxes functionality of the web application that would allow an authenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

Stack-based buffer overflow in the IMAP service in NetWin SurgeMail 38k4-4 and earlier allows remote authenticated users to execute arbitrary code via long arguments to the LSUB command.

Stack-based buffer overflow in the IMAP server component in GroupWise Internet Agent (GWIA) in Novell GroupWise 7.x before 7.0 post-SP4 FTF and 8.x before 8.0 SP2 allows remote attackers to execute arbitrary code via a long mailbox name in a CREATE command.

A buffer overflow exists in the SMS handler API of ALEOS before 4.13.0, 4.9.5, 4.9.4 that may allow code execution as root.

A vulnerability classified as critical was found in X.org Server. Affected by this vulnerability is the function _GetCountedString of the file xkb/xkb.c. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211051.

Stack-based buffer overflow in the NSFComputeEvaluateExt function in Nnotes.dll in IBM Lotus Domino 8.5.2 allows remote authenticated users to execute arbitrary code via a long tHPRAgentName parameter in an fmHttpPostRequest OpenForm action to WebAdmin.nsf.

VMware ESXi (6.0 before ESXi600-201711101-SG, 5.5 ESXi550-201709101-SG), Workstation (12.x before 12.5.8), and Fusion (8.x before 8.5.9) contain a vulnerability that could allow an authenticated VNC session to cause a stack overflow via a specific set of VNC packets. Successful exploitation of this issue could result in remote code execution in a virtual machine via the authenticated VNC session. Note: In order for exploitation to be possible in ESXi, VNC must be manually enabled in a virtual machine's .vmx configuration file. In addition, ESXi must be configured to allow VNC traffic through the built-in firewall.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

AMI BMC contains a vulnerability in the IPMI handler, where an attacker with the required privileges can cause a buffer overflow, which may lead to code execution, denial of service, or escalation of privileges.  

Diagnostics functionality on D-Link DSL-3782 devices with firmware EU v. 1.01 has a buffer overflow, allowing authenticated remote attackers to execute arbitrary code via a long Addr value to the 'set Diagnostics_Entry' function in an HTTP request, related to /userfs/bin/tcapi.

Buffer overflow in WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

Stack-based buffer overflow in lcfd.exe in Tivoli Endpoint in IBM Tivoli Management Framework 3.7.1, 4.1, 4.1.1, and 4.3.1 allows remote authenticated users to execute arbitrary code via a long opts field.

A vulnerability, which was classified as critical, was found in EasyFTP 1.7.0.2. Affected is an unknown function of the component MKD Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250716.

APTIOV contains a vulnerability in the BIOS where a user or attacker may cause an improper restriction of operations within the bounds of a memory buffer over the network. A successful exploitation of this vulnerability may lead to code execution outside of the intended System Management Mode.

Stack-based buffer overflow in NWFTPD.NLM before 5.10.02 in the FTP server in Novell NetWare allows remote authenticated users to execute arbitrary code or cause a denial of service (abend) via a long DELE command, a different vulnerability than CVE-2010-0625.4.

An exploitable buffer overflow vulnerability exists in the camera "create" feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts the "state" field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

A buffer overflow vulnerability in BMC Control-M/Agent 7.0.00.000 when the On-Do action destination is Mail and the Control-M/Agent is configured to send the email, allows remote attackers to have unspecified impact via vectors related to the configured IP address or SMTP server.

Stack-based buffer overflow in Oracle 9i and 10g allows remote attackers to execute arbitrary code via a long token in the text of a wrapped procedure.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can read and write to arbitrary locations within the memory context of the IPMI server process, which may lead to code execution, denial of service, information disclosure, or data tampering.

IBM Analytics Content Hub 2.0 is vulnerable to a buffer overflow due to improper return length checking. A remote authenticated attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

Multiple stack-based buffer overflows in the jclient._Java_novell_jclient_JClient_defineClass@20 function in jclient.dll in the Tomcat web server in Novell iManager 2.7, 2.7.3, and 2.7.3 FTF2 allow remote authenticated users to execute arbitrary code via the (1) EnteredClassID or (2) NewClassName parameter to nps/servlet/webacc.

Heap-based buffer overflow in the Local Security Authority Subsystem Service (LSASS), as used in Active Directory in Microsoft Windows Server 2003 SP2 and Windows Server 2008 Gold, SP2, and R2; Active Directory Application Mode (ADAM) in Windows XP SP2 and SP3 and Windows Server 2003 SP2; and Active Directory Lightweight Directory Service (AD LDS) in Windows Vista SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7, allows remote authenticated users to execute arbitrary code via malformed LDAP messages, aka "LSASS Heap Overflow Vulnerability."

Windows Fax Service Remote Code Execution Vulnerability

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to cause a denial of service (dhost.exe crash) and possibly execute arbitrary code via a long string to /dhost/modules?I:.

A buffer copy without checking size of input ('classic buffer overflow') in Fortinet FortiMail webmail and administrative interface version 6.4.0 through 6.4.4 and before 6.2.6 and FortiNDR administrative interface version 7.2.0 and before 7.1.0 allows an authenticated attacker with regular webmail access to trigger a buffer overflow and to possibly execute unauthorized code or commands via specifically crafted HTTP requests.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a stack-based buffer overflow, where a string is copied into a buffer using a memcpy-like function and a user-provided length. This requires a valid login to exploit.

The issue was addressed with improved bounds checks. This issue is fixed in macOS Ventura 13.3, macOS Monterey 12.6.4, macOS Big Sur 11.7.5. A remote user may be able to cause unexpected app termination or arbitrary code execution.

Buffer overflow in the FTP Service in Microsoft Internet Information Services (IIS) 5.0 through 6.0 allows remote authenticated users to execute arbitrary code via a crafted NLST (NAME LIST) command that uses wildcards, leading to memory corruption, aka "IIS FTP Service RCE and DoS Vulnerability."