Tensorflow is an Open Source Machine Learning Framework. There is a typo in TensorFlow's `SpecializeType` which results in heap OOB read/write. Due to a typo, `arg` is initialized to the `i`th mutable argument in a loop where the loop index is `j`. Hence it is possible to assign to `arg` from outside the vector of arguments. Since this is a mutable proto value, it allows both read and write to outside of bounds data. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, and TensorFlow 2.6.3, as these are also affected and still in supported range.
Tensorflow is an Open Source Machine Learning Framework. An attacker can craft a TFLite model that would allow limited reads and writes outside of arrays in TFLite. This exploits missing validation in the conversion from sparse tensors to dense tensors. The fix is included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range. Users are advised to upgrade as soon as possible.
Tensorflow is an Open Source Machine Learning Framework. The implementation of `Dequantize` does not fully validate the value of `axis` and can result in heap OOB accesses. The `axis` argument can be `-1` (the default value for the optional argument) or any other positive value at most the number of dimensions of the input. Unfortunately, the upper bound is not checked and this results in reading past the end of the array containing the dimensions of the input tensor. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
In cellular modem firmware, there is a possible out of bounds read due to a missing bounds check. This could lead to remote code execution with LTE authentication needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-240462530References: N/A
An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. There is a heap-based buffer overflow in set_ntacl_dacl, related to use of SMB2_QUERY_INFO_HE after a malformed SMB2_SET_INFO_HE command.
In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with the entries array element size of 8 bytes. Based on the incorrect freemap, the name area starts at byte 440, which is below the end of the entries array! That's why the assertion triggers and the filesystem shuts down. How did we end up here? First, recall from the previous patch that the freemap array in an xattr leaf block is not intended to be a comprehensive map of all free space in the leaf block. In other words, it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time ago If we add one xattr, the entries array grows to 384 bytes, and freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we add a second xattr, the entries array grows to 392 bytes, and freemap[0] gets pushed up to [base = 392, size = 0]. This is bad, because freemap[1] hasn't been updated, and now the entries array and the free space claim the same space. The fix here is to adjust all freemap entries so that none of them collide with the entries array. Note that this fix relies on commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and the previous patch that resets zero length freemap entries to have base = 0.
Elevation of privilege
A Code Execution vulnerability exists in Android prior to 4.4.0 related to the addJavascriptInterface method and the accessibility and accessibilityTraversal objects, which could let a remote malicious user execute arbitrary code.
IBM Aspera Faspex 5.0.0 through 5.0.12 could allow an authenticated user to obtain sensitive information or perform unauthorized actions on behalf of another user due to improper protection of assumed immutable data.
The Java Admin Console in Veritas NetBackup through 10.1 and related Veritas products on Linux and UNIX allows authenticated non-root users (that have been explicitly added to the auth.conf file) to execute arbitrary commands as root.
Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28.
A Local File Inclusion vulnerability has been found in Axiell Iguana CMS. Due to insufficient neutralisation of user input on the url parameter on the Proxy.type.php endpoint, external users are capable of accessing files on the server.
IBM Cloud Pak for Multicloud Management Monitoring 2.0 and 2.3 allows users without admin roles access to admin functions by specifying direct URL paths. IBM X-Force ID: 238210.
IBM Sterling B2B Integrator Standard Edition 6.1.0.0 through 6.1.1.1, and 6.1.2.0 could allow an authenticated user to perform actions they should not have access to due to improper permission controls. IBM X-Force ID: 235597.
IBM Security Guardium 10.6 and 11.2 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 191398.
IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.2.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 233786.
The (1) get_user and (2) put_user API functions in the Linux kernel before 3.5.5 on the v6k and v7 ARM platforms do not validate certain addresses, which allows attackers to read or modify the contents of arbitrary kernel memory locations via a crafted application, as exploited in the wild against Android devices in October and November 2013.
IBM Aspera Faspex 5.0.0 through 5.0.12 could allow an authenticated user to obtain sensitive information or perform unauthorized actions on behalf of another user due to client-side enforcement of server-side security.
In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate owner of durable handle on reconnect Currently, ksmbd does not verify if the user attempting to reconnect to a durable handle is the same user who originally opened the file. This allows any authenticated user to hijack an orphaned durable handle by predicting or brute-forcing the persistent ID. According to MS-SMB2, the server MUST verify that the SecurityContext of the reconnect request matches the SecurityContext associated with the existing open. Add a durable_owner structure to ksmbd_file to store the original opener's UID, GID, and account name. and catpure the owner information when a file handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner() to validate the identity of the requester during SMB2_CREATE (DHnC).
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl() smb_inherit_dacl() trusts the on-disk num_aces value from the parent directory's DACL xattr and uses it to size a heap allocation: aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...); num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces) without checking that it is consistent with the declared pdacl_size. An authenticated client whose parent directory's security.NTACL is tampered (e.g. via offline xattr corruption or a concurrent path that bypasses parse_dacl()) can present num_aces = 65535 with minimal actual ACE data. This causes a ~8 MB allocation (not kzalloc, so uninitialized) that the subsequent loop only partially populates, and may also overflow the three-way size_t multiply on 32-bit kernels. Additionally, the ACE walk loop uses the weaker offsetof(struct smb_ace, access_req) minimum size check rather than the minimum valid on-wire ACE size, and does not reject ACEs whose declared size is below the minimum. Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path. A legitimate mount.cifs client creates a parent directory over SMB (ksmbd writes a valid security.NTACL xattr), then the NTACL blob on the backing filesystem is rewritten to set num_aces = 0xFFFF while keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s hash check still passes. A subsequent SMB2 CREATE of a child under that parent drives smb2_open() into smb_inherit_dacl() (share has "vfs objects = acl_xattr" set), which fails the page allocator: WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0 Workqueue: ksmbd-io handle_ksmbd_work __alloc_frozen_pages_noprof+0x46c/0x9c0 ___kmalloc_large_node+0x68/0x130 __kmalloc_large_node_noprof+0x24/0x70 __kmalloc_noprof+0x4c9/0x690 smb_inherit_dacl+0x394/0x2430 smb2_open+0x595d/0xabe0 handle_ksmbd_work+0x3d3/0x1140 With the patch applied the added guard rejects the tampered value with -EINVAL before any large allocation runs, smb2_open() falls back to smb2_create_sd_buffer(), and the child is created with a default SD. No warning, no splat. Fix by: 1. Validating num_aces against pdacl_size using the same formula applied in parse_dacl(). 2. Replacing the raw kmalloc(sizeof * num_aces * 2) with kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe allocation. 3. Tightening the per-ACE loop guard to require the minimum valid ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and rejecting under-sized ACEs, matching the hardening in smb_check_perm_dacl() and parse_dacl(). v1 -> v2: - Replace the synthetic test-module splat in the changelog with a real-path UML + KASAN reproduction driven through mount.cifs and SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name in v1 since it does not exist in ksmbd. - Drop the commit-hash citation from the code comment per Namjae's review; keep the parse_dacl() pointer.
In Skia, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In main of main.cpp, there is a possible way to bypass SELinux due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
Super Flexible Software GmbH & Co. KG Syncovery 9 for Linux v9.47x and below was discovered to contain multiple remote code execution (RCE) vulnerabilities via the Job_ExecuteBefore and Job_ExecuteAfter parameters at post_profilesettings.php.
NVIDIA FLARE SDK contains a vulnerability in FOBS, where an attacker may cause deserialization of untrusted data by sending a malicious FOBS- encoded message. A successful exploit of this vulnerability might lead to code execution.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: add chann_lock to protect ksmbd_chann_list xarray ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del). Adds rw_semaphore chann_lock to struct ksmbd_session and protects all xa_load/xa_store/xa_erase accesses.
In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time.
The optional ShellUserGroupProvider in Apache NiFi 1.10.0 to 1.16.2 and Apache NiFi Registry 0.6.0 to 1.16.2 does not neutralize arguments for group resolution commands, allowing injection of operating system commands on Linux and macOS platforms. The ShellUserGroupProvider is not included in the default configuration. Command injection requires ShellUserGroupProvider to be one of the enabled User Group Providers in the Authorizers configuration. Command injection also requires an authenticated user with elevated privileges. Apache NiFi requires an authenticated user with authorization to modify access policies in order to execute the command. Apache NiFi Registry requires an authenticated user with authorization to read user groups in order to execute the command. The resolution removes command formatting based on user-provided arguments.
Access Control Vulnerability in Gerrit chromiumos project configuration in Google ChromeOS 16063.87.0 allows an attacker with a registered Gerrit account to inject malicious code into ChromeOS projects and potentially achieve Remote Code Execution and Denial of Service via editing trusted pipelines by insufficient access controls and misconfigurations in Gerrit's project.config.
IBM Storage Protect Server 8.2.0 IBM Storage Protect Plus Server is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify, or delete information in the back-end database.
In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_sessions_deregister() In multichannel mode, UAF issue can occur in session_deregister when the second channel sets up a session through the connection of the first channel. session that is freed through the global session table can be accessed again through ->sessions of connection.
IBM Aspera Orchestrator 4.0.0 through 4.1.0 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify, or delete information in the back-end database.
Vulnerability in Centreon Centreon Open Tickets on Central Server on Linux (Centroen Open Ticket modules).This issue affects Centreon Open Tickets on Central Server: from all before 25.10.3, 24.10.8, 24.04.7.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix session use-after-free in multichannel connection There is a race condition between session setup and ksmbd_sessions_deregister. The session can be freed before the connection is added to channel list of session. This patch check reference count of session before freeing it.
In drivers/usb/gadget/udc/udc-xilinx.c in the Linux kernel before 5.16.12, the endpoint index is not validated and might be manipulated by the host for out-of-array access.
Tensorflow is an Open Source Machine Learning Framework. The implementation of shape inference for `Dequantize` is vulnerable to an integer overflow weakness. The `axis` argument can be `-1` (the default value for the optional argument) or any other positive value at most the number of dimensions of the input. Unfortunately, the upper bound is not checked, and, since the code computes `axis + 1`, an attacker can trigger an integer overflow. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
IBM Aspera Orchestrator 4.0.0 through 4.1.0 could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.
Improper Limitation of a Pathname 'Path Traversal') vulnerability in Algosec Firewall Analyzer on Linux, 64 bit allows an authenticated user to upload files to a restricted directory leading to code injection. This issue affects Algosec Firewall Analyzer: A33.0 (up to build 320), A33.10 (up to build 210).
Tensorflow is an Open Source Machine Learning Framework. An attacker can craft a TFLite model that would cause a write outside of bounds of an array in TFLite. In fact, the attacker can override the linked list used by the memory allocator. This can be leveraged for an arbitrary write primitive under certain conditions. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
Tensorflow is an Open Source Machine Learning Framework. TensorFlow is vulnerable to a heap OOB write in `Grappler`. The `set_output` function writes to an array at the specified index. Hence, this gives a malicious user a write primitive. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
Tensorflow is an Open Source Machine Learning Framework. An attacker can craft a TFLite model that would cause an integer overflow in embedding lookup operations. Both `embedding_size` and `lookup_size` are products of values provided by the user. Hence, a malicious user could trigger overflows in the multiplication. In certain scenarios, this can then result in heap OOB read/write. Users are advised to upgrade to a patched version.
Tensorflow is an Open Source Machine Learning Framework. Under certain scenarios, Grappler component of TensorFlow is vulnerable to an integer overflow during cost estimation for crop and resize. Since the cropping parameters are user controlled, a malicious person can trigger undefined behavior. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
Tensorflow is an Open Source Machine Learning Framework. The implementation of `Range` suffers from integer overflows. These can trigger undefined behavior or, in some scenarios, extremely large allocations. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
Tensorflow is an Open Source Machine Learning Framework. The implementation of `AssignOp` can result in copying uninitialized data to a new tensor. This later results in undefined behavior. The implementation has a check that the left hand side of the assignment is initialized (to minimize number of allocations), but does not check that the right hand side is also initialized. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
This vulnerability could allow a remote attacker to execute remote commands with improper validation of parameters of certain API constructors. Remote attackers could use this vulnerability to execute malicious commands such as directory traversal.
Tensorflow is an Open Source Machine Learning Framework. An attacker can craft a TFLite model that would cause an integer overflow in `TfLiteIntArrayCreate`. The `TfLiteIntArrayGetSizeInBytes` returns an `int` instead of a `size_t. An attacker can control model inputs such that `computed_size` overflows the size of `int` datatype. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
IBM Spectrum Protect Plus Container Backup and Restore (10.1.5 through 10.1.10.2 for Kubernetes and 10.1.7 through 10.1.10.2 for Red Hat OpenShift) could allow a remote attacker to bypass IBM Spectrum Protect Plus role based access control restrictions, caused by improper disclosure of session information. By retrieving the logs of a container an attacker could exploit this vulnerability to bypass login security of the IBM Spectrum Protect Plus server and gain unauthorized access based on the permissions of the IBM Spectrum Protect Plus user to the vulnerable Spectrum Protect Plus server software. IBM X-Force ID: 225340.
The IBM Spectrum Protect 8.1.14.000 server could allow a remote attacker to bypass security restrictions, caused by improper enforcement of access controls. By signing in, an attacker could exploit this vulnerability to bypass security and gain unauthorized administrator or node access to the vulnerable server.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix dfs radar event locking The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.