In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity tests to TCP_QUEUE_SEQ Qingyu Li reported a syzkaller bug where the repro changes RCV SEQ _after_ restoring data in the receive queue. mprotect(0x4aa000, 12288, PROT_READ) = 0 mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000 mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000 socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0 sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0 setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0 recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer) syslog shows: [ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0 [ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0 This should not be allowed. TCP_QUEUE_SEQ should only be used when queues are empty. This patch fixes this case, and the tx path as well.

In the Linux kernel, the following vulnerability has been resolved: mptcp: error out earlier on disconnect Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 </TASK>

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80

An issue was discovered in the Linux kernel before 5.15.11. There is a memory leak in the __rds_conn_create() function in net/rds/connection.c in a certain combination of circumstances.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: fix sk refcount leaks We must put 'sk' reference before returning.

In the Linux kernel, the following vulnerability has been resolved: f2fs: Require FMODE_WRITE for atomic write ioctls The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dpt: Make DPT object unshrinkable In some scenarios, the DPT object gets shrunk but the actual framebuffer did not and thus its still there on the DPT's vm->bound_list. Then it tries to rewrite the PTEs via a stale CPU mapping. This causes panic. [vsyrjala: Add TODO comment] (cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)

In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects The hwmp code use objects of type mesh_preq_queue, added to a list in ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath gets deleted, ex mesh interface is removed, the entries in that list will never get cleaned. Fix this by flushing all corresponding items of the preq_queue in mesh_path_flush_pending(). This should take care of KASAN reports like this: unreferenced object 0xffff00000668d800 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s) hex dump (first 32 bytes): 00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h..... 8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>........... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 unreferenced object 0xffff000009051f00 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s) hex dump (first 32 bytes): 90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h..... 36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy..... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Remove proc entry when dev is unregistered. syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456'

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add a check for attr_names and oatbl Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? refcount_warn_saturate+0xb2/0x100 ? report_bug+0x158/0x190 ? prb_read_valid+0x20/0x30 ? handle_bug+0x3e/0x70 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xb2/0x100 ? refcount_warn_saturate+0xb2/0x100 ax25_release+0x2ad/0x360 __sock_release+0x35/0xa0 sock_close+0x19/0x20 [...] On reboot (or any attempt to remove the interface), the kernel gets stuck in an infinite loop: unregister_netdevice: waiting for ax0 to become free. Usage count = 0 This patch corrects these issues by ensuring that we call netdev_hold() and ax25_dev_hold() for new connections in ax25_accept(). This makes the logic leading to ax25_accept() match the logic for ax25_bind(): in both cases we increment the refcount, which is ultimately decremented in ax25_release().

In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_clear_cmd racing issue When ufshcd_clear_cmd is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by the ISR. And ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE. Return success when the request is completed by ISR because sq does not need cleanup. The racing flow is: Thread A ufshcd_err_handler step 1 ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_clear_cmd ... ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace: ufshcd_try_to_abort_task: cmd pending in the device. tag = 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise] Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise] Call trace: dump_backtrace+0xf8/0x148 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c mrdump_common_die+0x24c/0x398 [mrdump] ipanic_die+0x20/0x34 [mrdump] notify_die+0x80/0xd8 die+0x94/0x2b8 __do_kernel_fault+0x264/0x298 do_page_fault+0xa4/0x4b8 do_translation_fault+0x38/0x54 do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise] ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise] ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock.

In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread);

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection [Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr() Requests the vchan lock before using xdma->stop_request.

In the Linux kernel, the following vulnerability has been resolved: riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context __kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72 [<ffffffff8092bb24>] dump_stack+0x14/0x1c [<ffffffff8003b7ac>] __might_resched+0x104/0x10e [<ffffffff8003b7f4>] __might_sleep+0x3e/0x62 [<ffffffff8093276a>] down_write+0x20/0x72 [<ffffffff8000cf00>] __set_memory+0x82/0x2fa [<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4 [<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a [<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba [<ffffffff80011904>] copy_process+0x72c/0x17ec [<ffffffff80012ab4>] kernel_clone+0x60/0x2fe [<ffffffff80012f62>] kernel_thread+0x82/0xa0 [<ffffffff8003552c>] kthreadd+0x14a/0x1be [<ffffffff809357de>] ret_from_fork+0xe/0x1c Rewrite this function with apply_to_existing_page_range(). It is fine to not have any locking, because __kernel_map_pages() works with pages being allocated/deallocated and those pages are not changed by anyone else in the meantime.

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length No check is done on the size of the data to be transmiited. This causes a kernel panic when this size exceeds the sg_miter's length. Limit the number of transmitted bytes to sgm->length.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images.

In the Linux kernel, the following vulnerability has been resolved: iommu: Return right value in iommu_sva_bind_device() iommu_sva_bind_device() should return either a sva bond handle or an ERR_PTR value in error cases. Existing drivers (idxd and uacce) only check the return value with IS_ERR(). This could potentially lead to a kernel NULL pointer dereference issue if the function returns NULL instead of an error pointer. In reality, this doesn't cause any problems because iommu_sva_bind_device() only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA. In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will return an error, and the device drivers won't call iommu_sva_bind_device() at all.

In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: don't lock while !TASK_RUNNING There is a report of io_rsrc_ref_quiesce() locking a mutex while not TASK_RUNNING, which is due to forgetting restoring the state back after io_run_task_work_sig() and attempts to break out of the waiting loop. do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff815d2494>] prepare_to_wait+0xa4/0x380 kernel/sched/wait.c:237 WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099 __might_sleep+0x114/0x160 kernel/sched/core.c:10099 RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099 Call Trace: <TASK> __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752 io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253 io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799 __io_uring_register io_uring/register.c:424 [inline] __do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set bh->b_assoc_map, it will trigger NULL pointer dereference when calling into ocfs2_abort_trigger(). Actually this was pointed out in history, see commit 74e364ad1b13. But I've made a mistake when reviewing commit 8887b94d9322 and then re-introduce this regression. Since we cannot revive bdev in buffer head, so fix this issue by initializing all types of ocfs2 triggers when fill super, and then get the specific ocfs2 trigger from ocfs2_caching_info when access journal. [joseph.qi@linux.alibaba.com: v2]

In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113.

In the Linux kernel, the following vulnerability has been resolved: net/smc: check smcd_v2_ext_offset when receiving proposal msg When receiving proposal msg in server, the field smcd_v2_ext_offset in proposal msg is from the remote client and can not be fully trusted. Once the value of smcd_v2_ext_offset exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the value of smcd_v2_ext_offset before using it.

In the Linux kernel, the following vulnerability has been resolved: net/tcp_ao: Don't leak ao_info on error-path It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on version 5 [1] of TCP-AO patches. Quite frustrative that having all these selftests that I've written, running kmemtest & kcov was always in todo. [1]: https://lore.kernel.org/netdev/20230215183335.800122-5-dima@arista.com/

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix H264 multi stateless decoder smatch warning Fix a smatch static checker warning on vdec_h264_req_multi_if.c. Which leads to a kernel crash when fb is NULL.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on.

In the Linux kernel, the following vulnerability has been resolved: iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error.

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: Fix sb_field_downgrade validation - bch2_sb_downgrade_validate() wasn't checking for a downgrade entry extending past the end of the superblock section - for_each_downgrade_entry() is used in to_text() and needs to work on malformed input; it also was missing a check for a field extending past the end of the section

fs/btrfs/volumes.c in the Linux kernel before 5.1 allows a btrfs_verify_dev_extents NULL pointer dereference via a crafted btrfs image because fs_devices->devices is mishandled within find_device, aka CID-09ba3bc9dd15.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix memregion leaks in devm_cxl_add_region() Move the mode verification to __create_region() before allocating the memregion to avoid the memregion leaks.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Avoid null pointer dereference in region lookup cxl_dpa_to_region() looks up a region based on a memdev and DPA. It wrongly assumes an endpoint found mapping the DPA is also of a fully assembled region. When not true it leads to a null pointer dereference looking up the region name. This appears during testing of region lookup after a failure to assemble a BIOS defined region or if the lookup raced with the assembly of the BIOS defined region. Failure to clean up BIOS defined regions that fail assembly is an issue in itself and a fix to that problem will alleviate some of the impact. It will not alleviate the race condition so let's harden this path. The behavior change is that the kernel oops due to a null pointer dereference is replaced with a dev_dbg() message noting that an endpoint was mapped. Additional comments are added so that future users of this function can more clearly understand what it provides.

A vulnerability was found in btrfs_alloc_tree_b in fs/btrfs/extent-tree.c in the Linux kernel due to an improper lock operation in btrfs. In this flaw, a user with a local privilege may cause a denial of service (DOS) due to a deadlock problem.

NULL Pointer Dereference vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (net, bluetooth modules) allows Overflow Buffers. This vulnerability is associated with program files /net/bluetooth/rfcomm/core.C. This issue affects Linux kernel: v2.6.12-rc2.

In the Linux kernel, the following vulnerability has been resolved: block: fix request.queuelist usage in flush Friedrich Weber reported a kernel crash problem and bisected to commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine"). The root cause is that we use "list_move_tail(&rq->queuelist, pending)" in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch(). We don't initialize its queuelist just for this first request, although the queuelist of all later popped requests will be initialized. Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so rq->queuelist doesn't need to be initialized. It should be ok since rq can't be on any list when PREFLUSH or POSTFLUSH, has no move actually. Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine") also has another requirement that no drivers would touch rq->queuelist after blk_mq_end_request() since we will reuse it to add rq to the post-flush pending list in POSTFLUSH. If this is not true, we will have to revert that commit IMHO. This updated version adds "list_del_init(&rq->queuelist)" in flush rq callback since the dm layer may submit request of a weird invalid format (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add if without this "list_del_init(&rq->queuelist)". The weird invalid format problem should be fixed in dm layer.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix memory leak in audio daemon attach operation Audio PD daemon send the name as part of the init IOCTL call. This name needs to be copied to kernel for which memory is allocated. This memory is never freed which might result in memory leak. Free the memory when it is not needed.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't attempt to schedule hpd_work on headless cards If the card doesn't have display hardware, hpd_work and hpd_lock are left uninitialized which causes BUG when attempting to schedule hpd_work on runtime PM resume. Fix it by adding headless flag to DRM and skip any hpd if it's set.