In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in agilent usb If the agilent usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix NULL dereference in SR-IOV VF creation error path Clean up when virtfn setup fails to prevent NULL pointer dereference during device removal. The kernel oops below occurred due to incorrect error handling flow when pci_setup_device() fails. Add pci_iov_scan_device(), which handles virtfn allocation and setup and cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need to call pci_stop_and_remove_bus_device(). This prevents accessing partially initialized virtfn devices during removal. BUG: kernel NULL pointer dereference, address: 00000000000000d0 RIP: 0010:device_del+0x3d/0x3d0 Call Trace: pci_remove_bus_device+0x7c/0x100 pci_iov_add_virtfn+0xfa/0x200 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 [bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly]

In the Linux kernel, the following vulnerability has been resolved: xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty.

A flaw was found in the Linux kernel’s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.

In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: w1: fix NULL pointer dereference in probe The w1_uart_probe() function calls w1_uart_serdev_open() (which includes devm_serdev_device_open()) before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via w1_uart_serdev_open().

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Check the return value of of_property_read_string_index() Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac]

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix tlb invalidation when wedging If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6)

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and only if the local API is emulated/virtualized by KVM, and explicitly reject said hypercalls if the local APIC is emulated in userspace, i.e. don't rely on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID. Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if Hyper-V enlightenments are exposed to the guest without an in-kernel local APIC: dump_stack+0xbe/0xfd __kasan_report.cold+0x34/0x84 kasan_report+0x3a/0x50 __apic_accept_irq+0x3a/0x5c0 kvm_hv_send_ipi.isra.0+0x34e/0x820 kvm_hv_hypercall+0x8d9/0x9d0 kvm_emulate_hypercall+0x506/0x7e0 __vmx_handle_exit+0x283/0xb60 vmx_handle_exit+0x1d/0xd0 vcpu_enter_guest+0x16b0/0x24c0 vcpu_run+0xc0/0x550 kvm_arch_vcpu_ioctl_run+0x170/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscal1_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode can't be modified after vCPUs are created, i.e. if one vCPU has an in-kernel local APIC, then all vCPUs have an in-kernel local APIC.

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.

In the Linux kernel, the following vulnerability has been resolved: net: mana: cleanup mana struct after debugfs_remove() When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 19 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion When BIOS neglects to assign bus numbers to PCI bridges, the kernel attempts to correct that during PCI device enumeration. If it runs out of bus numbers, no pci_bus is allocated and the "subordinate" pointer in the bridge's pci_dev remains NULL. The PCIe bandwidth controller erroneously does not check for a NULL subordinate pointer and dereferences it on probe. Bandwidth control of unusable devices below the bridge is of questionable utility, so simply error out instead. This mirrors what PCIe hotplug does since commit 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp probe"). The PCI core emits a message with KERN_INFO severity if it has run out of bus numbers. PCIe hotplug emits an additional message with KERN_ERR severity to inform the user that hotplug functionality is disabled at the bridge. A similar message for bandwidth control does not seem merited, given that its only purpose so far is to expose an up-to-date link speed in sysfs and throttle the link speed on certain laptops with limited Thermal Design Power. So error out silently. User-visible messages: pci 0000:16:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [...] pci_bus 0000:45: busn_res: [bus 45-74] end is updated to 74 pci 0000:16:02.0: devices behind bridge are unusable because [bus 45-74] cannot be assigned for them [...] pcieport 0000:16:02.0: pciehp: Hotplug bridge without secondary bus, ignoring [...] BUG: kernel NULL pointer dereference RIP: pcie_update_link_speed pcie_bwnotif_enable pcie_bwnotif_probe pcie_port_probe_service really_probe

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix kernel panic due to null pointer dereference Address a kernel panic caused by a null pointer dereference in the `mt792x_rx_get_wcid` function. The issue arises because the `deflink` structure is not properly initialized with the `sta` context. This patch ensures that the `deflink` structure is correctly linked to the `sta` context, preventing the null pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000400 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 470 Comm: mt76-usb-rx phy Not tainted 6.12.13-gentoo-dist #1 Hardware name: /AMD HUDSON-M1, BIOS 4.6.4 11/15/2011 RIP: 0010:mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib] RSP: 0018:ffffa147c055fd98 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8e9ecb652000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e9ecb652000 RBP: 0000000000000685 R08: ffff8e9ec6570000 R09: 0000000000000000 R10: ffff8e9ecd2ca000 R11: ffff8e9f22a217c0 R12: 0000000038010119 R13: 0000000080843801 R14: ffff8e9ec6570000 R15: ffff8e9ecb652000 FS: 0000000000000000(0000) GS:ffff8e9f22a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 000000000d2ea000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib] mt7921_queue_rx_skb+0x1c6/0xaa0 [mt7921_common] mt76u_alloc_queues+0x784/0x810 [mt76_usb] ? __pfx___mt76_worker_fn+0x10/0x10 [mt76] __mt76_worker_fn+0x4f/0x80 [mt76] kthread+0xd2/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region() The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region() macro to request a needed resource. A string variable that lives on the stack is then used to store a dynamically computed resource name, which is then passed on as one of the macro arguments. This can lead to undefined behavior. Depending on the current contents of the memory, the manifestations of errors may vary. One possible output may be as follows: $ cat /proc/iomem 30000000-37ffffff : 38000000-3fffffff : Sometimes, garbage may appear after the colon. In very rare cases, if no NULL-terminator is found in memory, the system might crash because the string iterator will overrun which can lead to access of unmapped memory above the stack. Thus, fix this by replacing outbound_name with the name of the previously requested resource. With the changes applied, the output will be as follows: $ cat /proc/iomem 30000000-37ffffff : memory2 38000000-3fffffff : memory3 [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() There are a potential wild pointer dereferences issue regarding APIs class_dev_iter_(init|next|exit)(), as explained by below typical usage: // All members of @iter are wild pointers. struct class_dev_iter iter; // class_dev_iter_init(@iter, @class, ...) checks parameter @class for // potential class_to_subsys() error, and it returns void type and does // not initialize its output parameter @iter, so caller can not detect // the error and continues to invoke class_dev_iter_next(@iter) even if // @iter still contains wild pointers. class_dev_iter_init(&iter, ...); // Dereference these wild pointers in @iter here once suffer the error. while (dev = class_dev_iter_next(&iter)) { ... }; // Also dereference these wild pointers here. class_dev_iter_exit(&iter); Actually, all callers of these APIs have such usage pattern in kernel tree. Fix by: - Initialize output parameter @iter by memset() in class_dev_iter_init() and give callers prompt by pr_crit() for the error. - Check if @iter is valid in class_dev_iter_next().

In the Linux kernel, the following vulnerability has been resolved: can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to bail out if skb cannot be allocated.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info.

In the Linux kernel, the following vulnerability has been resolved: rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The per-netns structure can be obtained from the table->data using container_of(), then the 'net' one can be retrieved from the listen socket (if available).

In the Linux kernel, the following vulnerability has been resolved: tcp: drop secpath at the same time as we currently drop dst Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems.

In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: fix freeing IRQ in am65_cpsw_nuss_remove_tx_chns() When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns negative error value on error. So not NULL check is not sufficient to deteremine if IRQ is valid. Check that IRQ is greater then zero to ensure it is valid. There is no issue at probe time but at runtime user can invoke .set_channels which results in the following call chain. am65_cpsw_set_channels() am65_cpsw_nuss_update_tx_rx_chns() am65_cpsw_nuss_remove_tx_chns() am65_cpsw_nuss_init_tx_chns() At this point if am65_cpsw_nuss_init_tx_chns() fails due to k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a negative value. Then, at subsequent .set_channels with higher channel count we will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns() leading to a kernel warning. The issue is present in the original commit that introduced this driver, although there, am65_cpsw_nuss_update_tx_rx_chns() existed as am65_cpsw_nuss_update_tx_chns().

In the Linux kernel, the following vulnerability has been resolved: sched: address a potential NULL pointer dereference in the GRED scheduler. If kzalloc in gred_init returns a NULL pointer, the code follows the error handling path, invoking gred_destroy. This, in turn, calls gred_offload, where memset could receive a NULL pointer as input, potentially leading to a kernel crash. When table->opt is NULL in gred_init(), gred_change_table_def() is not called yet, so it is not necessary to call ->ndo_setup_tc() in gred_offload().

In the Linux kernel, the following vulnerability has been resolved: net: Add rx_skb of kfree_skb to raw_tp_null_args[]. Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0] in trace_kfree_skb if the prog does not check if rx_sk is NULL. Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL. Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier validate such a prog and prevent the issue. Now we fail to load such a prog: libbpf: prog 'drop': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21 0: (79) r3 = *(u64 *)(r1 +24) func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock' 1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1) ; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24 1: (69) r4 = *(u16 *)(r3 +16) R3 invalid mem access 'trusted_ptr_or_null_' processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 -- END PROG LOAD LOG -- Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp arguments with PTR_MAYBE_NULL"). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 PREEMPT SMP RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x148/0x420 ? search_bpf_extables+0x5b/0x70 ? fixup_exception+0x27/0x2c0 ? exc_page_fault+0x75/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d bpf_trace_run4+0x68/0xd0 ? unix_stream_connect+0x1f4/0x6f0 sk_skb_reason_drop+0x90/0x120 unix_stream_connect+0x1f4/0x6f0 __sys_connect+0x7f/0xb0 __x64_sys_connect+0x14/0x20 do_syscall_64+0x47/0xc30 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.

A NULL pointer dereference flaw was found in the Linux kernel AMD Sensor Fusion Hub driver. This flaw allows a local user to crash the system.

An issue was discovered in the Linux kernel brcm_nvram_parse in drivers/nvmem/brcm_nvram.c. Lacks for the check of the return value of kzalloc() can cause the NULL Pointer Dereference.

A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma.

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream before comparing them [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Prevent null pointer access in xe_migrate_copy xe_migrate_copy designed to copy content of TTM resources. When source resource is null, it will trigger a NULL pointer dereference in xe_migrate_copy. To avoid this situation, update lacks source flag to true for this case, the flag will trigger xe_migrate_clear rather than xe_migrate_copy. Issue trace: <7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14, sizes: 4194304 & 4194304 <7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15, sizes: 4194304 & 4194304 <1> [317.128055] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [317.128064] #PF: supervisor read access in kernel mode <1> [317.128066] #PF: error_code(0x0000) - not-present page <6> [317.128069] PGD 0 P4D 0 <4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted: G U N 6.11.0-rc7-xe #1 <4> [317.128078] Tainted: [U]=USER, [N]=TEST <4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024 <4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8 fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31 ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff <4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246 <4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX: 0000000000000000 <4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI: 0000000000000000 <4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09: 0000000000000001 <4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88814e7b1f08 <4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15: 0000000000000001 <4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000) knlGS:0000000000000000 <4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4: 0000000000770ef0 <4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 <4> [317.128184] PKRU: 55555554 <4> [317.128185] Call Trace: <4> [317.128187] <TASK> <4> [317.128189] ? show_regs+0x67/0x70 <4> [317.128194] ? __die_body+0x20/0x70 <4> [317.128196] ? __die+0x2b/0x40 <4> [317.128198] ? page_fault_oops+0x15f/0x4e0 <4> [317.128203] ? do_user_addr_fault+0x3fb/0x970 <4> [317.128205] ? lock_acquire+0xc7/0x2e0 <4> [317.128209] ? exc_page_fault+0x87/0x2b0 <4> [317.128212] ? asm_exc_page_fault+0x27/0x30 <4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128263] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128265] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128267] ? sg_free_append_table+0x20/0x80 <4> [317.128271] ? lock_acquire+0xc7/0x2e0 <4> [317.128273] ? mark_held_locks+0x4d/0x80 <4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128281] ? __pm_runtime_resume+0x60/0xa0 <4> [317.128284] xe_bo_move+0x682/0xc50 [xe] <4> [317.128315] ? lock_is_held_type+0xaa/0x120 <4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm] <4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm] <4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe] <4> [317.128360] ? find_held_lock+0x31/0x90 <4> [317.128363] ? lock_release+0xd1/0x2a0 <4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] <4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe] <4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit] <4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [ku ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netkit: Assign missing bpf_net_context During the introduction of struct bpf_net_context handling for XDP-redirect, the netkit driver has been missed, which also requires it because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the per-CPU variables. Otherwise we see the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000038 bpf_redirect() netkit_xmit() dev_hard_start_xmit() Set the bpf_net_context before invoking netkit_xmit() program within the netkit driver.

In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists.

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix NULL dereference in linedisp_release linedisp_release() currently retrieves the enclosing struct linedisp via to_linedisp(). That lookup depends on the attachment list, but the attachment may already have been removed before put_device() invokes the release callback. This can happen in linedisp_unregister(), and can also be reached from some linedisp_register() error paths. In that case, to_linedisp() returns NULL and linedisp_release() dereferences it while freeing the display resources. The struct device released here is the embedded linedisp->dev used by linedisp_register(), so retrieve the enclosing object directly with container_of() instead.

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: fix ida_free call while not allocated In the snd_utimer_create() function, if the kasprintf() function return NULL, snd_utimer_put_id() will be called, finally use ida_free() to free the unallocated id 0. the syzkaller reported the following information: ------------[ cut here ]------------ ida_free called for id=0 which is not allocated. WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/idr.c:592 Modules linked in: CPU: 1 UID: 0 PID: 1286 Comm: syz-executor164 Not tainted 6.15.8 #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 RIP: 0010:ida_free+0x1fd/0x2f0 lib/idr.c:592 Code: f8 fc 41 83 fc 3e 76 69 e8 70 b2 f8 (...) RSP: 0018:ffffc900007f79c8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 1ffff920000fef3b RCX: ffffffff872176a5 RDX: ffff88800369d200 RSI: 0000000000000000 RDI: ffff88800369d200 RBP: 0000000000000000 R08: ffffffff87ba60a5 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f6f1abc1740(0000) GS:ffff8880d76a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f1ad7a784 CR3: 000000007a6e2000 CR4: 00000000000006f0 Call Trace: <TASK> snd_utimer_put_id sound/core/timer.c:2043 [inline] [snd_timer] snd_utimer_create+0x59b/0x6a0 sound/core/timer.c:2184 [snd_timer] snd_utimer_ioctl_create sound/core/timer.c:2202 [inline] [snd_timer] __snd_timer_user_ioctl.isra.0+0x724/0x1340 sound/core/timer.c:2287 [snd_timer] snd_timer_user_ioctl+0x75/0xc0 sound/core/timer.c:2298 [snd_timer] vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x198/0x200 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x7b/0x160 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] The utimer->id should be set properly before the kasprintf() function, ensures the snd_utimer_put_id() function will free the allocated id.

A NULL pointer dereference issue was found in KVM when releasing a vCPU with dirty ring support enabled. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.

A NULL pointer dereference flaw was found in the Linux kernel’s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.