In the Linux kernel, the following vulnerability has been resolved: arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack() `cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks. In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it. In `call_on_irq_stack()`, it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls `call_on_irq_stack()` and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use ! This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled. This is possible on a default config, but unlikely. However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority. Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics. Completely mask DAIF in `cpu_switch_to()` and restore it when returning. Do the same in `call_on_irq_stack()`, but restore and mask around the branch. Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations. Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix kernel crash when hard resetting the GPU The GPU hard reset sequence calls pm_runtime_force_suspend() and pm_runtime_force_resume(), which according to their documentation should only be used during system-wide PM transitions to sleep states. The main issue though is that depending on some internal runtime PM state as seen by pm_runtime_force_suspend() (whether the usage count is <= 1), pm_runtime_force_resume() might not resume the device unless needed. If that happens, the runtime PM resume callback pvr_power_device_resume() is not called, the GPU clocks are not re-enabled, and the kernel crashes on the next attempt to access GPU registers as part of the power-on sequence. Replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to the driver's runtime PM callbacks, pvr_power_device_suspend() and pvr_power_device_resume(), to ensure clocks are re-enabled and avoid the kernel crash.

In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length.

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll() rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct size of rpl is sizeof(*rpl) which should be just 1 byte. Using the pointer size instead can cause stack corruption: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100 CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023 Workqueue: events module_flash_fw_work Call Trace: <TASK> panic+0x339/0x360 ? ethtool_cmis_wait_for_cond+0xf4/0x100 ? __pfx_status_success+0x10/0x10 ? __pfx_status_fail+0x10/0x10 __stack_chk_fail+0x10/0x10 ethtool_cmis_wait_for_cond+0xf4/0x100 ethtool_cmis_cdb_execute_cmd+0x1fc/0x330 ? __pfx_status_fail+0x10/0x10 cmis_cdb_module_features_get+0x6d/0xd0 ethtool_cmis_cdb_init+0x8a/0xd0 ethtool_cmis_fw_update+0x46/0x1d0 module_flash_fw_work+0x17/0xa0 process_one_work+0x179/0x390 worker_thread+0x239/0x340 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497

In the Linux kernel, the following vulnerability has been resolved: firewire: nosy: ensure user_length is taken into account when fetching packet contents Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows.

A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded.

In the Linux kernel, the following vulnerability has been resolved: media: stk1160: fix bounds checking in stk1160_copy_video() The subtract in this condition is reversed. The ->length is the length of the buffer. The ->bytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it's unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the ->bytesused doesn't actually work for this purpose because we're not writing to "buf->mem + buf->bytesused". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf->length bytes.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

In the Linux kernel, the following vulnerability has been resolved: riscv: process: Fix kernel gp leakage childregs represents the registers which are active for the new thread in user context. For a kernel thread, childregs->gp is never used since the kernel gp is not touched by switch_to. For a user mode helper, the gp value can be observed in user space after execve or possibly by other means. [From the email thread] The /* Kernel thread */ comment is somewhat inaccurate in that it is also used for user_mode_helper threads, which exec a user process, e.g. /sbin/init or when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have PF_KTHREAD set and are valid targets for ptrace etc. even before they exec. childregs is the *user* context during syscall execution and it is observable from userspace in at least five ways: 1. kernel_execve does not currently clear integer registers, so the starting register state for PID 1 and other user processes started by the kernel has sp = user stack, gp = kernel __global_pointer$, all other integer registers zeroed by the memset in the patch comment. This is a bug in its own right, but I'm unwilling to bet that it is the only way to exploit the issue addressed by this patch. 2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread before it execs, but ptrace requires SIGSTOP to be delivered which can only happen at user/kernel boundaries. 3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for user_mode_helpers before the exec completes, but gp is not one of the registers it returns. 4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses are also exposed via PERF_SAMPLE_REGS_USER which is permitted under LOCKDOWN_PERF. I have not attempted to write exploit code. 5. Much of the tracing infrastructure allows access to user registers. I have not attempted to determine which forms of tracing allow access to user registers without already allowing access to kernel registers.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Fix not validating setsockopt user input Check user input length before copying data.

A use-after-free flaw was found in vcs_read in drivers/tty/vt/vc_screen.c in vc_screen in the Linux Kernel. This issue may allow an attacker with local user access to cause a system crash or leak internal kernel information.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not validating setsockopt user input Check user input length before copying data.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

A NULL pointer dereference flaw in diFree in fs/jfs/inode.c in Journaled File System (JFS)in the Linux kernel. This could allow a local attacker to crash the system or leak kernel internal information.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix kernel crash due to null io->bio We should return when io->bio is null before doing anything. Otherwise, panic. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs] Call Trace: <TASK> f2fs_submit_merged_write+0x1d/0x30 [f2fs] commit_checkpoint+0x110/0x1e0 [f2fs] f2fs_write_checkpoint+0x9f7/0xf00 [f2fs] ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] __checkpoint_and_complete_reqs+0x84/0x190 [f2fs] ? preempt_count_add+0x82/0xc0 ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] issue_checkpoint_thread+0x4c/0xf0 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xff/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: use a bounce buffer for copying skb->mark syzbot found arm64 builds would crash in sock_recv_mark() when CONFIG_HARDENED_USERCOPY=y x86 and powerpc are not detecting the issue because they define user_access_begin. This will be handled in a different patch, because a check_object_size() is missing. Only data from skb->cb[] can be copied directly to/from user space, as explained in commit 79a8a642bf05 ("net: Whitelist the skbuff_head_cache "cb" field") syzbot report was: usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90 sp : ffff80000fb9b9a0 x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00 x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000 x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8 x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000 x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118 x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400 x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00 x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:90 __check_heap_object+0xa8/0x100 mm/slub.c:4761 check_heap_object mm/usercopy.c:196 [inline] __check_object_size+0x208/0x6b8 mm/usercopy.c:251 check_object_size include/linux/thread_info.h:199 [inline] __copy_to_user include/linux/uaccess.h:115 [inline] put_cmsg+0x408/0x464 net/core/scm.c:238 sock_recv_mark net/socket.c:975 [inline] __sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984 sock_recv_cmsgs include/net/sock.h:2728 [inline] packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482 ____sys_recvmsg+0x110/0x3a0 ___sys_recvmsg net/socket.c:2737 [inline] __sys_recvmsg+0x194/0x210 net/socket.c:2767 __do_sys_recvmsg net/socket.c:2777 [inline] __se_sys_recvmsg net/socket.c:2774 [inline] __arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52 el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000)

In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl It is possible to peep kernel page's data by providing larger `insize` in struct cros_ec_command[1] when invoking EC host commands. Fix it by using zeroed memory. [1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") inserts lfence instructions after 1) initializing a stack slot and 2) spilling a pointer to the stack. However, this does not cover cases where a stack slot is first initialized with a pointer (subject to sanitization) but then overwritten with a scalar (not subject to sanitization because the slot was already initialized). In this case, the second write may be subject to speculative store bypass (SSB) creating a speculative pointer-as-scalar type confusion. This allows the program to subsequently leak the numerical pointer value using, for example, a branch-based cache side channel. To fix this, also sanitize scalars if they write a stack slot that previously contained a pointer. Assuming that pointer-spills are only generated by LLVM on register-pressure, the performance impact on most real-world BPF programs should be small. The following unprivileged BPF bytecode drafts a minimal exploit and the mitigation: [...] // r6 = 0 or 1 (skalar, unknown user input) // r7 = accessible ptr for side channel // r10 = frame pointer (fp), to be leaked // r9 = r10 # fp alias to encourage ssb *(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked // lfence added here because of pointer spill to stack. // // Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor // for no r9-r10 dependency. // *(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr // 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID, // store may be subject to SSB // // fix: also add an lfence when the slot contained a ptr // r8 = *(u64 *)(r9 - 8) // r8 = architecturally a scalar, speculatively a ptr // // leak ptr using branch-based cache side channel: r8 &= 1 // choose bit to leak if r8 == 0 goto SLOW // no mispredict // architecturally dead code if input r6 is 0, // only executes speculatively iff ptr bit is 1 r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast) SLOW: [...] After running this, the program can time the access to *(r7 + 0) to determine whether the chosen pointer bit was 0 or 1. Repeat this 64 times to recover the whole address on amd64. In summary, sanitization can only be skipped if one scalar is overwritten with another scalar. Scalar-confusion due to speculative store bypass can not lead to invalid accesses because the pointer bounds deducted during verification are enforced using branchless logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") for details. Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks} because speculative leaks are likely unexpected if these were enabled. For example, leaking the address to a protected log file may be acceptable while disabling the mitigation might unintentionally leak the address into the cached-state of a map that is accessible to unprivileged processes.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment").

In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix out-of-bounds memory access Fix a bug that pdata->cpu_map[] is set before out-of-bounds check. The problem might be triggered on systems with more than 128 cores per package.

In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c:377 amdgpu_mca_smu_get_mca_entry() warn: variable dereferenced before check 'mca_funcs' (see line 368) 357 int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev, enum amdgpu_mca_error_type type, 358 int idx, struct mca_bank_entry *entry) 359 { 360 const struct amdgpu_mca_smu_funcs *mca_funcs = adev->mca.mca_funcs; 361 int count; 362 363 switch (type) { 364 case AMDGPU_MCA_ERROR_TYPE_UE: 365 count = mca_funcs->max_ue_count; mca_funcs is dereferenced here. 366 break; 367 case AMDGPU_MCA_ERROR_TYPE_CE: 368 count = mca_funcs->max_ce_count; mca_funcs is dereferenced here. 369 break; 370 default: 371 return -EINVAL; 372 } 373 374 if (idx >= count) 375 return -EINVAL; 376 377 if (mca_funcs && mca_funcs->mca_get_mca_entry) ^^^^^^^^^ Checked too late!

In the Linux kernel, the following vulnerability has been resolved: mm: cachestat: fix folio read-after-free in cache walk In cachestat, we access the folio from the page cache's xarray to compute its page offset, and check for its dirty and writeback flags. However, we do not hold a reference to the folio before performing these actions, which means the folio can concurrently be released and reused as another folio/page/slab. Get around this altogether by just using xarray's existing machinery for the folio page offsets and dirty/writeback states. This changes behavior for tmpfs files to now always report zeroes in their dirty and writeback counters. This is okay as tmpfs doesn't follow conventional writeback cache behavior: its pages get "cleaned" during swapout, after which they're no longer resident etc.

In the Linux kernel, the following vulnerability has been resolved: x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups During memory error injection test on kernels >= v6.4, the kernel panics like below. However, this issue couldn't be reproduced on kernels <= v6.3. mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20} mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86 mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The MCA code can recover from an in-kernel #MC if the fixup type is EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT the only thing that is raised for an in-kernel #MC is a panic. ex_handler_uaccess() would warn if users gave a non-canonical addresses (with bit 63 clear) to {get, put}_user(), which was unexpected. Therefore, commit b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user() fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic. Commit 6014bc27561f ("x86-64: make access_ok() independent of LAM") added the check gp_fault_address_ok() right before the WARN_ONCE() in ex_handler_uaccess() to not warn about non-canonical user addresses due to LAM. With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user() exception fixups in order to be able to handle in-kernel MCEs correctly again. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations - Disallow families other than NFPROTO_{IPV4,IPV6,INET}. - Disallow layer 4 protocol with no ports, since destination port is a mandatory attribute for this object.

A memory leak flaw was found in the Linux kernel in acrn_dev_ioctl in the drivers/virt/acrn/hsm.c function in how the ACRN Device Model emulates virtual NICs in VM. This flaw allows a local privileged attacker to leak unauthorized kernel information, causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy() The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a metadata array to/from user space, may copy uninitialized buffer regions to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO and NILFS_IOCTL_GET_CPINFO. This can occur when the element size of the user space metadata given by the v_size member of the argument nilfs_argv structure is larger than the size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo structure) on the file system side. KMSAN-enabled kernels detect this issue as follows: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0xc0/0x100 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:169 [inline] nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572 alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287 __get_free_pages+0x34/0xc0 mm/page_alloc.c:5599 nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Bytes 16-127 of 3968 are uninitialized ... This eliminates the leak issue by initializing the page allocated as buffer using get_zeroed_page().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: drop short frames While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in.

In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix info leak when failing to get panel id Make sure to clear the transfer buffer before fetching the EDID to avoid leaking slab data to the logs on errors that leave the buffer unchanged.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix kernel panic during warm reset During warm reset device->fw_client is set to NULL. If a bus driver is registered after this NULL setting and before new firmware clients are enumerated by ISHTP, kernel panic will result in the function ishtp_cl_bus_match(). This is because of reference to device->fw_client->props.protocol_name. ISH firmware after getting successfully loaded, sends a warm reset notification to remove all clients from the bus and sets device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel module drivers were loaded right after any of the first ISHTP device was registered, regardless of whether it was a matched or an unmatched device. This resulted in all drivers getting registered much before the warm reset notification from ISH. Starting kernel v5.16, this issue got exposed after the change was introduced to load only bus drivers for the respective matching devices. In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are registered after the warm reset device fw_client NULL setting. cros_ec_ishtp driver_register() triggers the callback to ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel panic in guid_equal() when dereferencing fw_client NULL pointer to get protocol_name.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: exthdr: fix 4-byte stack OOB write If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961).

In the Linux kernel, the following vulnerability has been resolved: power: supply: rk817: Fix node refcount leak Dan Carpenter reports that the Smatch static checker warning has found that there is another refcount leak in the probe function. While of_node_put() was added in one of the return paths, it should in fact be added for ALL return paths that return an error and at driver removal time.

A NULL pointer dereference flaw was found in rxrpc_preparse_s in net/rxrpc/server_key.c in the Linux kernel. This flaw allows a local attacker to crash the system or leak internal kernel information.

A use-after-free flaw was found in vmxnet3_rq_alloc_rx_buf in drivers/net/vmxnet3/vmxnet3_drv.c in VMware's vmxnet3 ethernet NIC driver in the Linux Kernel. This issue could allow a local attacker to crash the system due to a double-free while cleaning up vmxnet3_rq_cleanup_all, which could also lead to a kernel information leak problem.

In the Linux kernel, the following vulnerability has been resolved: staging: media: max96712: fix kernel oops when removing module The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the refcount of the "smmu" even though the return value is less than 0. The reference counting issue happens in some error handling paths of arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get() fails, the caller functions forget to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by calling pm_runtime_resume_and_get() instead of pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount balanced in case of failure.

In the Linux kernel, the following vulnerability has been resolved: net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change The refcount leak issues take place in an error handling path. When the 3rd argument buf doesn't match with "offline", "online" or "remove", the function simply returns -EINVAL and forgets to decrease the reference count of a rpc_xprt object and a rpc_xprt_switch object increased by rpc_sysfs_xprt_kobj_get_xprt() and rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of both unused objects. Fix this issue by jumping to the error handling path labelled with out_put when buf matches none of "offline", "online" or "remove".

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix the assign logic of iocb commit 18ae8d12991b ("f2fs: show more DIO information in tracepoint") introduces iocb field in 'f2fs_direct_IO_enter' trace event And it only assigns the pointer and later it accesses its field in trace print log. Unable to handle kernel paging request at virtual address ffffffc04cef3d30 Mem abort info: ESR = 0x96000007 EC = 0x25: DABT (current EL), IL = 32 bits pc : trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4 lr : trace_raw_output_f2fs_direct_IO_enter+0x2c/0xa4 sp : ffffffc0443cbbd0 x29: ffffffc0443cbbf0 x28: ffffff8935b120d0 x27: ffffff8935b12108 x26: ffffff8935b120f0 x25: ffffff8935b12100 x24: ffffff8935b110c0 x23: ffffff8935b10000 x22: ffffff88859a936c x21: ffffff88859a936c x20: ffffff8935b110c0 x19: ffffff8935b10000 x18: ffffffc03b195060 x17: ffffff8935b11e76 x16: 00000000000000cc x15: ffffffef855c4f2c x14: 0000000000000001 x13: 000000000000004e x12: ffff0000ffffff00 x11: ffffffef86c350d0 x10: 00000000000010c0 x9 : 000000000fe0002c x8 : ffffffc04cef3d28 x7 : 7f7f7f7f7f7f7f7f x6 : 0000000002000000 x5 : ffffff8935b11e9a x4 : 0000000000006250 x3 : ffff0a00ffffff04 x2 : 0000000000000002 x1 : ffffffef86a0a31f x0 : ffffff8935b10000 Call trace: trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4 print_trace_fmt+0x9c/0x138 print_trace_line+0x154/0x254 tracing_read_pipe+0x21c/0x380 vfs_read+0x108/0x3ac ksys_read+0x7c/0xec __arm64_sys_read+0x20/0x30 invoke_syscall+0x60/0x150 el0_svc_common.llvm.1237943816091755067+0xb8/0xf8 do_el0_svc+0x28/0xa0 Fix it by copying the required variables for printing and while at it fix the similar issue at some other places in the same file.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: max9286: fix kernel oops when removing module When removing the max9286 module we get a kernel oops: Unable to handle kernel paging request at virtual address 000000aa00000094 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000 [000000aa00000094] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec CPU: 2 PID: 713 Comm: rmmod Tainted: G C 5.15.5-00057-gaebcd29c8ed7-dirty #5 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : i2c_mux_del_adapters+0x24/0xf0 lr : max9286_remove+0x28/0xd0 [max9286] sp : ffff800013a9bbf0 x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000 x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8 x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000 Call trace: i2c_mux_del_adapters+0x24/0xf0 max9286_remove+0x28/0xd0 [max9286] i2c_device_remove+0x40/0x110 __device_release_driver+0x188/0x234 driver_detach+0xc4/0x150 bus_remove_driver+0x60/0xe0 driver_unregister+0x34/0x64 i2c_del_driver+0x58/0xa0 max9286_i2c_driver_exit+0x1c/0x490 [max9286] __arm64_sys_delete_module+0x194/0x260 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x2c/0x94 el0_svc+0x28/0x80 el0t_64_sync_handler+0xa8/0x130 el0t_64_sync+0x1a0/0x1a4 The Oops happens because the I2C client data does not point to max9286_priv anymore but to v4l2_subdev. The change happened in max9286_init() which calls v4l2_i2c_subdev_init() later on... Besides fixing the max9286_remove() function, remove the call to i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make the necessary changes to max9286_init() so that it doesn't have to use i2c_get_clientdata() in order to fetch the pointer to priv.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak For some sev ioctl interfaces, the length parameter that is passed maybe less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the allocated buffer, these sev ioctl interface may return uninitialized kernel slab memory.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up.

A use-after-free flaw was found in the Linux kernel in log_replay in fs/ntfs3/fslog.c in the NTFS journal. This flaw allows a local attacker to crash the system and leads to a kernel information leak problem.

A vulnerability was found in the pfkey_register function in net/key/af_key.c in the Linux kernel. This flaw allows a local, unprivileged user to gain access to kernel memory, leading to a system crash or a leak of internal kernel information.