IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418.

In Bento4 1.6.0-638, there is an allocator is out of memory in the function AP4_Array<AP4_TrunAtom::Entry>::EnsureCapacity in Ap4Array.h:172, as demonstrated by GPAC. This can cause a denial of service (DOS).

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

An issue was discovered in 3S-Smart CODESYS V3 products. A crafted communication request may cause uncontrolled memory allocations in the affected CODESYS products and may result in a denial-of-service condition. All variants of the following CODESYS V3 products in all versions prior to v3.5.14.20 that contain the CmpGateway component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control V3 Runtime System Toolkit, CODESYS Gateway V3, CODESYS V3 Development System.

Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, an attacker who controls or compromises an APK repository used by apko could cause resource exhaustion on the build host. The ExpandApk function in pkg/apk/expandapk/expandapk.go expands .apk streams without enforcing decompression limits, allowing a malicious repository to serve a small, highly-compressed .apk that inflates into a large tar stream, consuming excessive disk space and CPU time, causing build failures or denial of service. This issue has been patched in version 1.1.1.

AdonisJS is a TypeScript-first web framework. Prior to versions 10.1.3 and 11.0.0-next.9, a denial of service (DoS) vulnerability exists in the multipart file handling logic of @adonisjs/bodyparser. When processing file uploads, the multipart parser may accumulate an unbounded amount of data in memory while attempting to detect file types, potentially leading to excessive memory consumption and process termination. This issue has been patched in versions 10.1.3 and 11.0.0-next.9.

notation-go is a collection of libraries for supporting Notation sign, verify, push, and pull of oci artifacts. Prior to version 1.0.0-rc.3, notation-go users will find their application using excessive memory when verifying signatures. The application will be killed, and thus availability is impacted. The problem has been patched in the release v1.0.0-rc.3. Some workarounds are available. Users can review their own trust policy file and check if the identity string contains `=#`. Meanwhile, users should only put trusted certificates in their trust stores referenced by their own trust policy files, and make sure the `authenticity` validation is set to `enforce`.

Some HTTP/2 implementations are vulnerable to a reset flood, potentially leading to a denial of service. The attacker opens a number of streams and sends an invalid request over each stream that should solicit a stream of RST_STREAM frames from the peer. Depending on how the peer queues the RST_STREAM frames, this can consume excess memory, CPU, or both.

Docker Registry before 2.6.2 in Docker Distribution does not properly restrict the amount of content accepted from a user, which allows remote attackers to cause a denial of service (memory consumption) via the manifest endpoint.

A vulnerability was discovered in IS-SVG version 2.1.0 to 4.2.2 and below where a Regular Expression Denial of Service (ReDOS) occurs if the application is provided and checks a crafted invalid SVG string.

Seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0 and below, serialization of objects with extreme depth can exceed the maximum call stack limit. In version 1.4.1, Seroval introduces a `depthLimit` parameter in serialization/deserialization methods. An error will be thrown if the depth limit is reached.

kopano-ical (formerly zarafa-ical) in Kopano Groupware Core through 8.7.16, 9.x through 9.1.0, 10.x through 10.0.7, and 11.x through 11.0.1 and Zarafa 6.30.x through 7.2.x allows memory exhaustion via long HTTP headers.

vLLM is an inference and serving engine for large language models (LLMs). In versions from 0.6.4 to before 0.12.0, users can crash the vLLM engine serving multimodal models that use the Idefics3 vision model implementation by sending a specially crafted 1x1 pixel image. This causes a tensor dimension mismatch that results in an unhandled runtime error, leading to complete server termination. This issue has been patched in version 0.12.0.

An issue in the sqlg_place_dpipes component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

A Regular Expression Denial of Service (ReDOS) vulnerability was discovered in Mpmath v1.0.0 through v1.2.1 when the mpmathify function is called.

Improper input handling in a system endpoint may allow attackers to overload resources, causing a denial of service.

An issue in the sqlg_group_node component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.

Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. From 2.49.0 to 2.49.4, the experimental form remote function uses a binary data format containing a representation of submitted form data. A specially-crafted payload can cause the server to allocate a large amount of memory, causing DoS via memory exhaustion. This vulnerability is fixed in 2.49.5.

An issue was discovered in the parse_duration crate through 2021-03-18 for Rust. It allows attackers to cause a denial of service (CPU and memory consumption) via a duration string with a large exponent.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0 and below, overriding encoded array lengths by replacing them with an excessively large value causes the deserialization process to significantly increase processing time. This issue has been fixed in version 1.4.1.

Mastodon is a free, open-source social network server based on ActivityPub. Mastodon versions before v4.3.18, v4.4.12, and v4.5.5 do not have a limit on the maximum number of poll options for remote posts, allowing attackers to create polls with a very large amount of options, greatly increasing resource consumption. Depending on the number of poll options, an attacker can cause disproportionate resource usage in both Mastodon servers and clients, potentially causing Denial of Service either server-side or client-side. Mastodon versions v4.5.5, v4.4.12, v4.3.18 are patched.

Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.

Connections received from the proxy port may not count towards total accepted connections, resulting in server crashes if the total number of connections exceeds available resources. This only applies to connections accepted from the proxy port, pending the proxy protocol header.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

webtransport-go is an implementation of the WebTransport protocol. From 0.3.0 to 0.9.0, an attacker can cause excessive memory consumption in webtransport-go's session implementation by sending a WT_CLOSE_SESSION capsule containing an excessively large Application Error Message. The implementation does not enforce the draft-mandated limit of 1024 bytes on this field, allowing a peer to send an arbitrarily large message payload that is fully read and stored in memory. This allows an attacker to consume an arbitrary amount of memory. The attacker must transmit the full payload to achieve the memory consumption, but the lack of any upper bound makes large-scale attacks feasible given sufficient bandwidth. This vulnerability is fixed in 0.10.0.

Starlite is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to version 1.5.2, the request body parsing in `starlite` allows a potentially unauthenticated attacker to consume a large amount of CPU time and RAM. The multipart body parser processes an unlimited number of file parts and an unlimited number of field parts. This is a remote, potentially unauthenticated Denial of Service vulnerability. This vulnerability affects applications with a request handler that accepts a `Body(media_type=RequestEncodingType.MULTI_PART)`. The large amount of CPU time required for processing requests can block all available worker processes and significantly delay or slow down the processing of legitimate user requests. The large amount of RAM accumulated while processing requests can lead to Out-Of-Memory kills. Complete DoS is achievable by sending many concurrent multipart requests in a loop. Version 1.51.2 contains a patch for this issue.

lunasvg v3.0.0 was discovered to contain a allocation-size-too-big bug via the component plutovg_surface_create.

An issue in the sqlg_hash_source component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default).

In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion).

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.35 and 3.6.7, there is a potential vulnerability in Traefik ACME TLS certificates' automatic generation: the ACME TLS-ALPN fast path can allow unauthenticated clients to tie up go routines and file descriptors indefinitely when the ACME TLS challenge is enabled. A malicious client can open many connections, send a minimal ClientHello with acme-tls/1, then stop responding, leading to denial of service of the entry point. The vulnerability is fixed in 2.11.35 and 3.6.7.

An allocation-size-too-big bug in the component /imagebuf.cpp of OpenImageIO v3.1.0.0dev may cause a Denial of Service (DoS) when the program to requests to allocate too much space.

An issue was discovered in Django 5.1 before 5.1.5, 5.0 before 5.0.11, and 4.2 before 4.2.18. Lack of upper-bound limit enforcement in strings passed when performing IPv6 validation could lead to a potential denial-of-service attack. The undocumented and private functions clean_ipv6_address and is_valid_ipv6_address are vulnerable, as is the django.forms.GenericIPAddressField form field. (The django.db.models.GenericIPAddressField model field is not affected.)

In AXESS ACS (Auto Configuration Server) through 5.2.0, unsanitized user input in the TR069 API allows remote unauthenticated attackers to cause a permanent Denial of Service via crafted TR069 requests on TCP port 9675 or 7547. Rebooting does not resolve the permanent Denial of Service.

Allocation of Resources Without Limits or Throttling in the HDF5 weight loading component in Google Keras 3.0.0 through 3.13.0 on all platforms allows a remote attacker to cause a Denial of Service (DoS) through memory exhaustion and a crash of the Python interpreter via a crafted .keras archive containing a valid model.weights.h5 file whose dataset declares an extremely large shape.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.0 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions could have allowed an unauthenticated user to cause denial of service by uploading malicious files.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.7 before 18.7.4, and 18.8 before 18.8.4 that could have allowed an unauthenticated user to cause denial of service through CPU exhaustion by submitting specially crafted markdown files that trigger exponential processing in markdown preview.

python-multipart is a streaming multipart parser for Python. When parsing form data, python-multipart skips line breaks (CR \r or LF \n) in front of the first boundary and any tailing bytes after the last boundary. This happens one byte at a time and emits a log event each time, which may cause excessive logging for certain inputs. An attacker could abuse this by sending a malicious request with lots of data before the first or after the last boundary, causing high CPU load and stalling the processing thread for a significant amount of time. In case of ASGI application, this could stall the event loop and prevent other requests from being processed, resulting in a denial of service (DoS). This vulnerability is fixed in 0.0.18.

rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows attackers to trigger resource exhaustion vulnerabilities in rpgp by providing crafted messages. This affects general message parsing and decryption with symmetric keys.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the server Tight encoder, which could result in a Denial-of-Service condition.