Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.6, tvOS 13.4.8, watchOS 6.2.8. A remote attacker may be able to cause unexpected system termination or corrupt kernel memory.

An issue was discovered in WeeChat before 2.7.1 (0.3.4 to 2.7 are affected). When a new IRC message 005 is received with longer nick prefixes, a buffer overflow and possibly a crash can happen when a new mode is set for a nick.

A stack-based buffer overflow in processCommandUploadSnapshot in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to cause denial of service or run arbitrary code as the root user.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Catalina 10.15.6, Security Update 2020-004 Mojave, Security Update 2020-004 High Sierra. A buffer overflow may result in arbitrary code execution.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetACLFilter.

Out-of-bounds write in IPv6 subsystem for Intel(R) AMT, Intel(R) ISM versions before 11.8.80, 11.12.80, 11.22.80, 12.0.70, 14.0.45 may allow an unauthenticated user to potentially enable escalation of privileges via network access.

Controller 6000 is vulnerable to a buffer overflow via the Controller diagnostic web interface upload feature. This issue affects Controller 6000: before vCR8.80.230201a, before vCR8.70.230201a, before vCR8.60.230201b, before vCR8.50.230201a, all versions of vCR8.40 and prior.

OpenSMTPD before 6.6.4 allows remote code execution because of an out-of-bounds read in mta_io in mta_session.c for multi-line replies. Although this vulnerability affects the client side of OpenSMTPD, it is possible to attack a server because the server code launches the client code during bounce handling.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formWPS.

Stack-based buffer overflow in Azure Application Gateway allows an unauthorized attacker to elevate privileges over a network.

eap.c in pppd in ppp 2.4.2 through 2.4.8 has an rhostname buffer overflow in the eap_request and eap_response functions.

Adobe Acrobat and Reader versions , 2019.021.20056 and earlier, 2017.011.30152 and earlier, 2017.011.30155 and earlier version, 2017.011.30152 and earlier, and 2015.006.30505 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution .

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via /goform/fromSetWirelessRepeat.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via /goform/add_white_node.

free5gc v4.1.0 and before is vulnerable to Buffer Overflow. When AMF receives an UplinkRANConfigurationTransfer NGAP message from a gNB, the AMF process crashes.

CA Unified Infrastructure Management (Nimsoft/UIM) 20.1, 20.3.x, and 9.20 and below contains a buffer overflow vulnerability in the robot (controller) component. A remote attacker can execute arbitrary code.

An exploitable stack-based buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera. A specially crafted http request can cause a stack-based buffer overflow resulting in overwriting arbitrary data on the stack frame. An attacker can simply send an http request to the device to trigger this vulnerability.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetRoute.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via /goform/FUN_0007343c.

Memory corruption in Modem while processing security related configuration before AS Security Exchange.

A remote SEH buffer overflow has been discovered in IntraSrv 1.0 (2007-06-03). An attacker may send a crafted HTTP GET or HEAD request that can result in a compromise of the hosting system.

Tenda AX3 V16.03.12.11 was discovered to contain a stack overflow via the timeType function at /goform/SetSysTimeCfg.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.

There is a buffer overwrite vulnerability in the Quram qmg library of Samsung's Android OS versions O(8.x), P(9.0) and Q(10.0). An unauthenticated, unauthorized attacker sending a specially crafted MMS to a vulnerable phone can trigger a heap-based buffer overflow in the Quram image codec leading to an arbitrary remote code execution (RCE) without any user interaction. The Samsung ID is SVE-2020-16747.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the config.smtp_email_subject parameter at /goform/formSetEmail.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via /goform/initIpAddrInfo.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_475FB0 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

nsak64.sys in Norman Malware Cleaner 2.08.08 allows users to call arbitrary kernel functions because the passing of function pointers between user and kernel mode is mishandled.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_48AF78 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

A buffer copy without checking size of input vulnerability has been reported to affect QNAP operating system. If exploited, the vulnerability possibly allows remote users to execute code via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 4.3.6.2441 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later

There are stack-based buffer overflow vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

The `Toybox.GenericChannel.setDeviceConfig` API method in CIQ API version 1.2.0 through 4.1.7 does not validate its parameter, which can result in buffer overflows when copying various attributes. A malicious application could call the API method with specially crafted object and hijack the execution of the device's firmware.

There are buffer overflow vulnerabilities in multiple underlying operating system processes that could lead to unauthenticated remote code execution by sending specially crafted packets via the PAPI protocol. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

The `Toybox.Cryptography.Cipher.initialize` API method in CIQ API version 3.0.0 through 4.1.7 does not validate its parameters, which can result in buffer overflows when copying data. A malicious application could call the API method with specially crafted parameters and hijack the execution of the device's firmware.

In Das U-Boot through 2020.01, a double free has been found in the cmd/gpt.c do_rename_gpt_parts() function. Double freeing may result in a write-what-where condition, allowing an attacker to execute arbitrary code. NOTE: this vulnerablity was introduced when attempting to fix a memory leak identified by static analysis.

Ampere AmpereOne AC03 devices before 3.5.9.3, AmpereOne AC04 devices before 4.4.5.2, and AmpereOne M devices before 5.4.5.1 allow an incorrectly formed SMC call to UEFI-MM MMCommunicate service that could result in an out-of-bounds write within the UEFI-MM Secure Partition context.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A buffer overflow issue was addressed with improved memory handling. This issue is fixed in macOS Big Sur 11.7.3, macOS Ventura 13.2, macOS Monterey 12.6.3. Mounting a maliciously crafted Samba network share may lead to arbitrary code execution.

The `news` MonkeyC operation code in CIQ API version 1.0.0 through 4.1.7 fails to check that string resources are not extending past the end of the expected sections. A malicious CIQ application could craft a string that starts near the end of a section, and whose length extends past its end. Upon loading the string, the GarminOS TVM component may read out-of-bounds memory.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption ( RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the rules parameter in the formAddDnsForward function.

Spamsniper 5.0 ~ 5.2.7 contain a stack-based buffer overflow vulnerability caused by improper boundary checks when parsing MAIL FROM command. It leads remote attacker to execute arbitrary code via crafted packet.

In OSSEC-HIDS 2.7 through 3.5.0, the server component responsible for log analysis (ossec-analysisd) is vulnerable to an off-by-one heap-based buffer overflow during the cleaning of crafted syslog msgs (received from authenticated remote agents and delivered to the analysisd processing queue by ossec-remoted).

An outbound read/write vulnerability exists in XPLATFORM that does not check offset input ranges, allowing out-of-range data to be read. An attacker can exploit arbitrary code execution.

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

In the Linux kernel through 5.3.2, cfg80211_mgd_wext_giwessid in net/wireless/wext-sme.c does not reject a long SSID IE, leading to a Buffer Overflow.