Authenticated command injection in the filename of a <redacted>.exe request leads to remote code execution as the root user. This issue affects Iocharger firmware for AC models before version 24120701. Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services. CVSS clarification: This attack can be performed over any network conenction serving the web interfacr (AV:N), and there are not additional mitigating measures that need to be circumvented (AC:L) or other prerequisites (AT:N). The attack does require privileges, but the level does not matter (PR:L), there is no user interaction required (UI:N). The attack leeds to a full compromised of the charger (VC:H/VI:H/VA:H) and a compromised charger can be used to "pivot" to networks that should normally not be reachable (SC:L/SI:L/SA:H). Because this is an EV chargers with significant pwoer, there is a potential safety imp0act (S:P). THis attack can be automated (AU:Y).

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setWanIeCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setModifyVpnUser. Authenticated Attackers can send malicious packet to execute arbitrary commands.

N-Reporter and N-Cloud, products of the N-Partner, have an OS Command Injection vulnerability. Remote attackers with normal user privilege can execute arbitrary system commands by manipulating user inputs on a specific page.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setSyslogCfg . Authenticated Attackers can send malicious packet to execute arbitrary commands.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setAccessDeviceCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setDmzCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

**UNSUPPORTED WHEN ASSIGNED** A post-authentication command injection vulnerability in the management commands of the legacy DSL CPE Zyxel VMG4325-B10A firmware version 1.00(AAFR.4)C0_20170615 could allow an authenticated attacker to execute operating system (OS) commands on an affected device via Telnet.

**UNSUPPORTED WHEN ASSIGNED** A post-authentication command injection vulnerability in the CGI program of the legacy DSL CPE Zyxel VMG4325-B10A firmware version 1.00(AAFR.4)C0_20170615 could allow an authenticated attacker to execute operating system (OS) commands on an affected device by sending a crafted HTTP POST request.

An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands.

A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

jc21 NGINX Proxy Manager before 2.11.3 allows backend/internal/certificate.js OS command injection by an authenticated user (with certificate management privileges) via untrusted input to the DNS provider configuration. NOTE: this is not part of any NGINX software shipped by F5.

rejetto HFS (aka HTTP File Server) 3 before 0.52.10 on Linux, UNIX, and macOS allows OS command execution by remote authenticated users (if they have Upload permissions). This occurs because a shell is used to execute df (i.e., with execSync instead of spawnSync in child_process in Node.js).

A vulnerability has been found in Tenda W30E 1.0.1.25(633) and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-260914 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.420.7, the Git Repository field during project creation is vulnerable to command injection. User input is not properly sanitized, allowing attackers to inject arbitrary shell commands that execute on the underlying server during the deployment workflow. A regular member user can exploit this vulnerability. Version 4.0.0-beta.420.7 contains a patch for the issue.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR860 allowing attackers to execute arbitrary commands via a crafted POST request to the network_set_wan_conf in file /usr/lib/lua/luci/controller/admin/netport.lua.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR600W allowing attackers to execute arbitrary commands via a crafted POST request to the check_changes in file /usr/lib/lua/luci/controller/admin/common.lua.

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

This vulnerability exists in ESDS Emagic Data Center Management Suit due to lack of input sanitization in its Ping component. A remote authenticated attacker could exploit this by injecting OS commands on the targeted system. Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code on targeted system.

Synel SYnergy Fingerprint Terminals - CWE-78: 'OS Command Injection'

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.420.7, a Remote Code Execution (RCE)*vulnerability exists in Coolify's application deployment workflow. This flaw allows a low-privileged member to inject arbitrary Docker Compose directives during project creation or updates. By defining a malicious service that mounts the host filesystem, an attacker can achieve root-level command execution on the host OS, completely bypassing container isolation. Version 4.0.0-beta.420.7 contains a patch for the issue.

Due to programming error in function module and report, IS-OIL component in SAP ECC and SAP S/4HANA allows an authenticated attacker to inject an arbitrary operating system command into an unprotected parameter in a common (default) extension.  On successful exploitation, the attacker can read or modify the system data as well as shut down the system.

Atos Unify OpenScape Session Border Controller through V10 R3.01.03 allows execution of OS commands as root user by low-privileged authenticated users.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a command injection in a HTTP POST request releated to font configuration operations to gain full access to the device.

A vulnerability was found in TamronOS up to 20230703. It has been classified as critical. This affects an unknown part of the file /api/ping. The manipulation of the argument host leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-233475. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.

A vulnerability was found in Ruijie BCR810W 2.5.10. It has been rated as critical. This issue affects some unknown processing of the component Tracert Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-233477 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.6, 11.3, 11.4, and 11.5 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 258824.

An OS Command Injection vulnerability in the Admin panel in Curo UC300 5.42.1.7.1.63R1 allows local attackers to inject arbitrary OS Commands via the "IP Addr" parameter.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP POST releated to certificate operations to gain full access to the device.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.11.2 contain a vulnerability that allows an authenticated attacker to upload a file under a specially crafted filename that will allow arbitrary command execution if said filename becomes included in a command defined in a system event handler and said event gets triggered. If no event handlers executing system commands with uploaded filenames as parameters have been configured, this vulnerability does not have an impact. The vulnerability is patched in version 1.11.3. As a workaround, OctoPrint administrators who have event handlers configured that include any kind of filename based placeholders should disable those by setting their `enabled` property to `False` or unchecking the "Enabled" checkbox in the GUI based Event Manager. Alternatively, OctoPrint administrators should set `feature.enforceReallyUniversalFilenames` to `true` in `config.yaml` and restart OctoPrint, then vet the existing uploads and make sure to delete any suspicious looking files. As always, OctoPrint administrators are advised to not expose OctoPrint on hostile networks like the public internet, and to vet who has access to their instance.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. QuTScloud is not affected. We have already fixed the vulnerability in the following versions: QuTS hero h4.5.4.2626 build 20231225 and later QTS 4.5.4.2627 build 20231225 and later

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in SonicWall GMS, SonicWall Analytics enables an authenticated attacker to execute arbitrary code with root privileges. This issue affects GMS: 9.3.2-SP1 and earlier versions; Analytics: 2.5.0.4-R7 and earlier versions.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

mailcow is a mail server suite based on Dovecot, Postfix and other open source software, that provides a modern web UI for user/server administration. A vulnerability has been discovered in mailcow which allows an attacker to manipulate internal Dovecot variables by using specially crafted passwords during the authentication process. The issue arises from the behavior of the `passwd-verify.lua` script, which is responsible for verifying user passwords during login attempts. Upon a successful login, the script returns a response in the format of "password=<valid-password>", indicating the successful authentication. By crafting a password with additional key-value pairs appended to it, an attacker can manipulate the returned string and influence the internal behavior of Dovecot. For example, using the password "123 mail_crypt_save_version=0" would cause the `passwd-verify.lua` script to return the string "password=123 mail_crypt_save_version=0". Consequently, Dovecot will interpret this string and set the internal variables accordingly, leading to unintended consequences. This vulnerability can be exploited by an authenticated attacker who has the ability to set their own password. Successful exploitation of this vulnerability could result in unauthorized access to user accounts, bypassing security controls, or other malicious activities. This issue has been patched in version `2023-05a`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. QuTScloud, QVR, QES are not affected. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2626 build 20231225 and later

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.