Code Execution via Malicious Files: Attackers can create specially crafted files with embedded code that may execute without adequate security validation, potentially leading to system compromise. Sandbox Bypass Vulnerability: A flaw in the TERR security mechanism allows attackers to bypass sandbox restrictions, enabling the execution of untrusted code without appropriate controls.

The Splus Server component of TIBCO Software Inc.'s TIBCO Spotfire Statistics Services contains a vulnerability that allows an unauthenticated remote attacker to upload or modify arbitrary files within the web server directory on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Statistics Services: versions 11.4.10 and below, versions 11.5.0, 11.6.0, 11.6.1, 11.6.2, 11.7.0, 11.8.0, 11.8.1, 12.0.0, 12.0.1, and 12.0.2, versions 12.1.0 and 12.2.0.

The administrative web server component of TIBCO Software Inc.'s TIBCO ActiveMatrix BPM, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric, TIBCO ActiveMatrix Policy Director, TIBCO ActiveMatrix Service Bus, TIBCO ActiveMatrix Service Grid, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric, TIBCO Silver Fabric Enabler for ActiveMatrix BPM, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid contains a vulnerability that could theoretically allow an unauthenticated user to download a file with credentials information. Affected releases are TIBCO Software Inc.'s TIBCO ActiveMatrix BPM: versions up to and including 4.2.0, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric: versions up to and including 4.2.0, TIBCO ActiveMatrix Policy Director: versions up to and including 1.1.0, TIBCO ActiveMatrix Service Bus: versions up to and including 3.3.0, TIBCO ActiveMatrix Service Grid: versions up to and including 3.3.1, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric: versions up to and including 3.3.0, TIBCO Silver Fabric Enabler for ActiveMatrix BPM: versions up to and including 1.4.1, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid: versions up to and including 1.3.1.

The Interior Server and Gateway Server components of TIBCO Software Inc.'s TIBCO PartnerExpress contain a vulnerability that theoretically allows an unauthenticated attacker with network access to execute a clickjacking attack on the affected system. A successful attack using this vulnerability does not require human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO PartnerExpress: versions 6.2.1 and below.

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

The Config UI component of TIBCO Software Inc.'s TIBCO API Exchange Gateway and TIBCO API Exchange Gateway Distribution for TIBCO Silver Fabric contains a vulnerability that theoretically allows an unauthenticated attacker with network access to execute a clickjacking attack on the affected system. A successful attack using this vulnerability does not require human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO API Exchange Gateway: versions 2.3.3 and below and TIBCO API Exchange Gateway Distribution for TIBCO Silver Fabric: versions 2.3.3 and below.

The file transfer component of TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i contains a vulnerability that theoretically allows an attacker to perform unauthorized network file transfers to and from the file system accessible to the affected component. This vulnerability is exploitable when the configuration option 'Require Node Resp' is set to 'No'. In the event of a successful exploit, the attacker could theoretically read and write any file on the file system accessible to the affected component, thus fully affecting the confidentiality, integrity, and availability of the operating system hosting the deployment of the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i: versions 7.1.0 and below, version 8.0.0.

The administrative UI component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server for AWS Marketplace, and TIBCO JasperReports Server for ActiveMatrix BPM contains a vulnerability that theoretically allows an unauthenticated attacker to obtain the permissions of a JasperReports Server "superuser" for the affected systems. The attacker can theoretically exploit the vulnerability consistently, remotely, and without authenticating. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: versions 7.1.1 and below, TIBCO JasperReports Server for AWS Marketplace: versions 7.1.1 and below, and TIBCO JasperReports Server for ActiveMatrix BPM: versions 7.1.1 and below.

The file transfer component of TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i contains a vulnerability that theoretically allows execution of arbitrary commands at the privilege level of the affected system following a failed file transfer. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i: versions 7.1.0 and below, version 8.0.0.

The Database component of TIBCO Software Inc.'s TIBCO BusinessConnect Container Edition contains an easily exploitable vulnerability that allows an unauthenticated attacker with network access to obtain the usernames and passwords of users of the affected system. Affected releases are TIBCO Software Inc.'s TIBCO BusinessConnect Container Edition: versions 1.1.0 and below.

The Web Server component of TIBCO Software Inc.'s TIBCO AuditSafe contains an easily exploitable vulnerability that allows an unauthenticated attacker with network access to execute API methods on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO AuditSafe: versions 1.1.0 and below.

URL GET parameter "logtime" utilized within the "downloadlog" function from "cbpi/http_endpoints/http_system.py" is subsequently passed to the "os.system" function in "cbpi/controller/system_controller.py" without prior validation allowing to execute arbitrary code.This issue affects CraftBeerPi 4: from 4.0.0.58 (commit 563fae9) before 4.4.1.a1 (commit 57572c7).

In Emacs before 29.4, org-link-expand-abbrev in lisp/ol.el expands a %(...) link abbrev even when it specifies an unsafe function, such as shell-command-to-string. This affects Org Mode before 9.7.5.

The CloudStack integration API service allows running its unauthenticated API server (usually on port 8096 when configured and enabled via integration.api.port global setting) for internal portal integrations and for testing purposes. By default, the integration API service port is disabled and is considered disabled when integration.api.port is set to 0 or negative. Due to an improper initialisation logic, the integration API service would listen on a random port when its port value is set to 0 (default value). An attacker that can access the CloudStack management network could scan and find the randomised integration API service port and exploit it to perform unauthorised administrative actions and perform remote code execution on CloudStack managed hosts and result in complete compromise of the confidentiality, integrity, and availability of CloudStack managed infrastructure. Users are recommended to restrict the network access on the CloudStack management server hosts to only essential ports. Users are recommended to upgrade to version 4.18.2.1, 4.19.0.2 or later, which addresses this issue.

setup/templates/findcore.php in MODX Revolution 2.5.4-pl and earlier allows remote attackers to execute arbitrary PHP code via the core_path parameter.

An issue in Intelight X-1L Traffic controller Maxtime v.1.9.6 allows a remote attacker to execute arbitrary code via the /cgi-bin/generateForm.cgi?formID=142 component.

agreejs shared v0.0.1 was discovered to contain a prototype pollution via the function mergeInternalComponents. This vulnerability allows attackers to execute arbitrary code or cause a Denial of Service (DoS) via injecting arbitrary properties.

The CloudStack cluster service runs on unauthenticated port (default 9090) that can be misused to run arbitrary commands on targeted hypervisors and CloudStack management server hosts. Some of these commands were found to have command injection vulnerabilities that can result in arbitrary code execution via agents on the hosts that may run as a privileged user. An attacker that can reach the cluster service on the unauthenticated port (default 9090), can exploit this to perform remote code execution on CloudStack managed hosts and result in complete compromise of the confidentiality, integrity, and availability of CloudStack managed infrastructure. Users are recommended to restrict the network access to the cluster service port (default 9090) on a CloudStack management server host to only its peer CloudStack management server hosts. Users are recommended to upgrade to version 4.18.2.1, 4.19.0.2 or later, which addresses this issue.

An issue was discovered in iTerm2 3.5.x before 3.5.2. Unfiltered use of an escape sequence to report a window title, in combination with the built-in tmux integration feature (enabled by default), allows an attacker to inject arbitrary code into the terminal, a different vulnerability than CVE-2024-38395.

An issue in mmzdev KnowledgeGPT V.0.0.5 allows a remote attacker to execute arbitrary code via the Document Display Component.

In iTerm2 before 3.5.2, the "Terminal may report window title" setting is not honored, and thus remote code execution might occur but "is not trivially exploitable."

MangoOS before 5.2.0 was discovered to contain a Client-Side Template Injection (CSTI) vulnerability via the Platform Management Edit page.

DedeBIZ v6.2.11 was discovered to contain multiple remote code execution (RCE) vulnerabilities at /admin/file_manage_control.php via the $activepath and $filename parameters.

In Spring Cloud Data Flow versions prior to 2.11.4,  a malicious user who has access to the Skipper server api can use a crafted upload request to write an arbitrary file to any location on the file system which could lead to compromising the server

Langflow through 0.6.19 allows remote code execution if untrusted users are able to reach the "POST /api/v1/custom_component" endpoint and provide a Python script.

Sourcecodester Gas Agency Management System v1.0 is vulnerable to SQL Injection via /gasmark/editbrand.php?id=.

A Prototype Pollution issue in getsetprop 1.1.0 allows an attacker to execute arbitrary code via global.accessor.

setup/controllers/welcome.php in MODX Revolution 2.5.4-pl and earlier allows remote attackers to execute arbitrary PHP code via the config_key parameter to the setup/index.php?action=welcome URI.

Samba since version 3.5.0 and before 4.6.4, 4.5.10 and 4.4.14 is vulnerable to remote code execution vulnerability, allowing a malicious client to upload a shared library to a writable share, and then cause the server to load and execute it.

Improper Control of Generation of Code ('Code Injection') vulnerability in Apache InLong. This issue affects Apache InLong: from 1.10.0 through 1.12.0, which could lead to Remote Code Execution. Users are advised to upgrade to Apache InLong's 1.13.0 or cherry-pick [1] to solve it. [1]  https://github.com/apache/inlong/pull/10251

Insecure deserialization in sqlitedict up to v2.1.0 allows attackers to execute arbitrary code.

A vulnerability in the Desktop Client of Mitel MiCollab through 9.7.1.110, and MiVoice Business Solution Virtual Instance (MiVB SVI) 1.0.0.25, could allow an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization. A successful exploit requires user interaction and could allow an attacker to execute arbitrary scripts.

This affects the package djv before 2.1.4. By controlling the schema file, an attacker can run arbitrary JavaScript code on the victim machine.

Tenda FH1206 V1.2.0.8(8155) was discovered to contain a command injection vulnerability via the mac parameter at ip/goform/WriteFacMac.

man-group/dtale version 3.10.0 is vulnerable to an authentication bypass and remote code execution (RCE) due to improper input validation. The vulnerability arises from a hardcoded `SECRET_KEY` in the flask configuration, allowing attackers to forge a session cookie if authentication is enabled. Additionally, the application fails to properly restrict custom filter queries, enabling attackers to execute arbitrary code on the server by bypassing the restriction on the `/update-settings` endpoint, even when `enable_custom_filters` is not enabled. This vulnerability allows attackers to bypass authentication mechanisms and execute remote code on the server.

In InoERP 0.7.2, an unauthorized attacker can execute arbitrary code on the server side due to lack of validations in /modules/sys/form_personalization/json_fp.php.

An issue in hisiphp v2.0.111 allows a remote attacker to execute arbitrary code via a crafted script to the SystemPlugins::mkInfo parameter in the SystemPlugins.php component.

There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

XWiki Platform is a generic wiki platform. Starting in version 2.4-milestone-1 and prior to versions 4.10.20, 15.5.4, and 15.10-rc-1, XWiki's database search allows remote code execution through the search text. This allows remote code execution for any visitor of a public wiki or user of a closed wiki as the database search is by default accessible for all users. This impacts the confidentiality, integrity and availability of the whole XWiki installation. This vulnerability has been patched in XWiki 14.10.20, 15.5.4 and 15.10RC1. As a workaround, one may manually apply the patch to the page `Main.DatabaseSearch`. Alternatively, unless database search is explicitly used by users, this page can be deleted as this is not the default search interface of XWiki.

An issue in flusity-CMS v.2.33 allows a remote attacker to execute arbitrary code via a crafted script to the edit_addon_post.php component.

An issue in Ecommerce-CodeIgniter-Bootstrap commit v. d22b54e8915f167a135046ceb857caaf8479c4da allows a remote attacker to execute arbitrary code via the saveLanguageFiles method of the Languages.php component.

Freeform 5.0.0 to before 5.10.16, a plugin for CraftCMS, contains an Server-side template injection (SSTI) vulnerability, resulting in arbitrary code injection for all users that have access to editing a form (submission title).

Newforma Project Center Server through 2023.3.0.32259 allows remote code execution because .NET Remoting is exposed.

The com.phlox.tvwebbrowser TV Bro application through 2.0.0 for Android mishandles external intents through WebView. This allows attackers to execute arbitrary code, create arbitrary files. and perform arbitrary downloads via JavaScript that uses takeBlobDownloadData.

An issue in Shenzhen TCL Browser TV Web BrowseHere (aka com.tcl.browser) 6.65.022_dab24cc6_231221_gp allows a remote attacker to execute arbitrary JavaScript code via the com.tcl.browser.portal.browse.activity.BrowsePageActivity component.

An issue in WWBN AVideo v.12.4 through v.14.2 allows a remote attacker to execute arbitrary code via the systemRootPath parameter of the submitIndex.php component.

Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Zeppelin. The attacker can inject sensitive configuration or malicious code when connecting MySQL database via JDBC driver. This issue affects Apache Zeppelin: before 0.11.1. Users are recommended to upgrade to version 0.11.1, which fixes the issue.

The package convert-svg-core before 0.6.2 are vulnerable to Remote Code Injection via sending an SVG file containing the payload.