Injection Vulnerabilities: Attackers can inject malicious code, potentially gaining control over the system executing these functions. Additionally, insufficient validation of filenames during file uploads can enable attackers to upload and execute malicious files, leading to arbitrary code execution

The file transfer component of TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i contains a vulnerability that theoretically allows an attacker to perform unauthorized network file transfers to and from the file system accessible to the affected component. This vulnerability is exploitable when the configuration option 'Require Node Resp' is set to 'No'. In the event of a successful exploit, the attacker could theoretically read and write any file on the file system accessible to the affected component, thus fully affecting the confidentiality, integrity, and availability of the operating system hosting the deployment of the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i: versions 7.1.0 and below, version 8.0.0.

The MFT Browser file transfer client and MFT Browser admin client components of TIBCO Software Inc.'s TIBCO Managed File Transfer Command Center and TIBCO Managed File Transfer Internet Server contain a vulnerability that theoretically allows an attacker to craft an URL that will execute arbitrary commands on the affected system. If the attacker convinces an authenticated user with a currently active session to enter or click on the URL the commands will be executed on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Command Center: versions 8.2.1 and below and TIBCO Managed File Transfer Internet Server: versions 8.2.1 and below.

The file transfer component of TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i contains a vulnerability that theoretically allows execution of arbitrary commands at the privilege level of the affected system following a failed file transfer. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Platform Server for IBM i: versions 7.1.0 and below, version 8.0.0.

Multiple buffer overflows in TIBCO Software Rendezvous before 8.1.0, as used in multiple TIBCO products, allow remote attackers to execute arbitrary code via a crafted message.

Multiple stack-based buffer overflows in TIBCO SmartPGM FX allow remote attackers to execute arbitrary code or cause a denial of service (service stop and file-transfer outage) via unspecified vectors. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.

The Splus Server component of TIBCO Software Inc.'s TIBCO Spotfire Statistics Services contains a vulnerability that allows an unauthenticated remote attacker to upload or modify arbitrary files within the web server directory on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Statistics Services: versions 11.4.10 and below, versions 11.5.0, 11.6.0, 11.6.1, 11.6.2, 11.7.0, 11.8.0, 11.8.1, 12.0.0, 12.0.1, and 12.0.2, versions 12.1.0 and 12.2.0.

The Interior Server and Gateway Server components of TIBCO Software Inc.'s TIBCO PartnerExpress contain an easily exploitable vulnerability that allows an unauthenticated attacker with network access to obtain session tokens for the affected system. A successful attack using this vulnerability requires human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO PartnerExpress: versions 6.2.1 and below.

The Database component of TIBCO Software Inc.'s TIBCO BusinessConnect Container Edition contains an easily exploitable vulnerability that allows an unauthenticated attacker with network access to obtain the usernames and passwords of users of the affected system. Affected releases are TIBCO Software Inc.'s TIBCO BusinessConnect Container Edition: versions 1.1.0 and below.

The administrative web server component of TIBCO Software Inc.'s TIBCO ActiveMatrix BPM, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric, TIBCO ActiveMatrix Policy Director, TIBCO ActiveMatrix Service Bus, TIBCO ActiveMatrix Service Grid, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric, TIBCO Silver Fabric Enabler for ActiveMatrix BPM, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid contains a vulnerability that could theoretically allow an unauthenticated user to download a file with credentials information. Affected releases are TIBCO Software Inc.'s TIBCO ActiveMatrix BPM: versions up to and including 4.2.0, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric: versions up to and including 4.2.0, TIBCO ActiveMatrix Policy Director: versions up to and including 1.1.0, TIBCO ActiveMatrix Service Bus: versions up to and including 3.3.0, TIBCO ActiveMatrix Service Grid: versions up to and including 3.3.1, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric: versions up to and including 3.3.0, TIBCO Silver Fabric Enabler for ActiveMatrix BPM: versions up to and including 1.4.1, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid: versions up to and including 1.3.1.

The Interior Server and Gateway Server components of TIBCO Software Inc.'s TIBCO PartnerExpress contain a vulnerability that theoretically allows an unauthenticated attacker with network access to execute a clickjacking attack on the affected system. A successful attack using this vulnerability does not require human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO PartnerExpress: versions 6.2.1 and below.

The Config UI component of TIBCO Software Inc.'s TIBCO API Exchange Gateway and TIBCO API Exchange Gateway Distribution for TIBCO Silver Fabric contains a vulnerability that theoretically allows an unauthenticated attacker with network access to execute a clickjacking attack on the affected system. A successful attack using this vulnerability does not require human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO API Exchange Gateway: versions 2.3.3 and below and TIBCO API Exchange Gateway Distribution for TIBCO Silver Fabric: versions 2.3.3 and below.

The administrative UI component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server for AWS Marketplace, and TIBCO JasperReports Server for ActiveMatrix BPM contains a vulnerability that theoretically allows an unauthenticated attacker to obtain the permissions of a JasperReports Server "superuser" for the affected systems. The attacker can theoretically exploit the vulnerability consistently, remotely, and without authenticating. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: versions 7.1.1 and below, TIBCO JasperReports Server for AWS Marketplace: versions 7.1.1 and below, and TIBCO JasperReports Server for ActiveMatrix BPM: versions 7.1.1 and below.

The Web Server component of TIBCO Software Inc.'s TIBCO AuditSafe contains an easily exploitable vulnerability that allows an unauthenticated attacker with network access to execute API methods on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO AuditSafe: versions 1.1.0 and below.

Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.

Kapsch TrafficCom RIS-9160 & RIS-9260 Roadside Units (RSUs) v3.2.0.829.23, v3.8.0.1119.42, and v4.6.0.1211.28 were discovered to lack secure password requirements for its BIOS Supervisor and User accounts, allowing attackers to bypass authentication via a bruteforce attack.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.12.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

In Gradle Enterprise before 2023.1, a remote attacker may be able to gain access to a new installation (in certain installation scenarios) because of a non-unique initial system user password. Although this password must be changed upon the first login, it is possible that an attacker logs in before the legitimate administrator logs in.

An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.

Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.

An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Once access is gained either by default, common, or cracked passwords, the video recordings (containing sensitive routes, conversations, and footage) are open for downloading by creating a socket to command port 7777, and then downloading video via port 7778 and audio via port 7779.

Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.

Beijing Zed-3 Technologies Co.,Ltd VoIP simpliclty ASG 8.5.0.17807 (20181130-16:12) has a Weak password vulnerability.

IBM Security Guardium 11.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196279.

Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.

A CWE-521: Weak Password Requirements vulnerability exists that could allow an attacker to gain control of the device when the attacker brute forces the password. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)

Default Credentail vulnerabilities allows access to an Aspect device using publicly available default credentials since the system does not require the installer to change default credentials.  Affected products: ABB ASPECT - Enterprise v3.07.02; NEXUS Series v3.07.02; MATRIX Series v3.07.02

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

Weak Password Requirements in GitHub repository ikus060/minarca prior to 4.2.2.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

Weak Password Requirements in GitHub repository notrinos/notrinoserp prior to 0.7.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.

Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.

Weak Password Requirements in GitHub repository modoboa/modoboa prior to 2.1.0.

The weak password on the web user interface can be exploited via HTTP or HTTPS. Once such access has been obtained, the other passwords can be changed. The weak password on Linux accounts can be accessed via SSH or Telnet, the former of which is by default enabled on trusted interfaces. While the SSH service does not support root login, a user logging in using either of the other Linux accounts may elevate to root access using the su command if they have access to the associated password.

Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.