A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection and external control of filename vulnerability in Palo Alto Networks PAN-OS allows authenticated administrators to execute code with root privileges or delete arbitrary system files and impact the system's integrity or cause a denial of service condition. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14.

A privilege escalation vulnerability was discovered in XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.

An OS command injection vulnerability in PAN-OS management interface allows an authenticated administrator to execute arbitrary OS commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

An OS Command Injection vulnerability in the PAN-OS management interface that allows authenticated administrators to execute arbitrary OS commands with root privileges. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.15; and all versions of PAN-OS 7.1 and PAN-OS 8.0. This issue does not impact PAN-OS 9.0, PAN-OS 9.1, or Prisma Access services.

An issue in Dolibarr ERP CRM v.17.0.1 and before allows a remote privileged attacker to execute arbitrary code via a crafted command/script.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated administrators to execute arbitrary OS commands with root privileges when uploading a new certificate in FIPS-CC mode. This issue affects: All versions of PAN-OS 7.1 and PAN-OS 8.0; PAN-OS 8.1 versions earlier than PAN-OS 8.1.13; PAN-OS 9.0 versions earlier than PAN-OS 9.0.7.

An OS Command Injection vulnerability in the PAN-OS management interface that allows authenticated administrators to execute arbitrary OS commands with root privileges. This issue impacts: PAN-OS 9.0 versions earlier than 9.0.10; PAN-OS 9.1 versions earlier than 9.1.4; PAN-OS 10.0 versions earlier than 10.0.1.

An OS Command Injection vulnerability in the PAN-OS management interface that allows authenticated administrators to execute arbitrary OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.3.

A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A privilege escalation vulnerability was discovered in an upload processing functionality of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

The Backup Migration plugin for WordPress is vulnerable to OS Command Injection in all versions up to, and including, 1.3.9 via the 'url' parameter. This vulnerability allows authenticated attackers, with administrator-level permissions and above, to execute arbitrary commands on the host operating system.

ASUS routers supporting custom OpenVPN profiles are vulnerable to a code execution vulnerability. An authenticated and remote attacker can execute arbitrary operating system commands by uploading a crafted OVPN profile. Known affected routers include ASUS ExpertWiFi, ASUS RT-AX55, ASUS RT-AX58U, ASUS RT-AC67U, ASUS RT-AC68R, ASUS RT-AC68U, ASUS RT-AX86, ASUS RT-AC86U, ASUS RT-AX88U, and ASUS RT-AX3000.

Tautulli is a Python based monitoring and tracking tool for Plex Media Server. A command injection vulnerability in Tautulli v2.15.3 and prior allows attackers with administrative privileges to obtain remote code execution on the application server. This vulnerability requires the application to have been cloned from GitHub and installed manually. When Tautulli is cloned directly from GitHub and installed manually, the application manages updates and versioning through calls to the `git` command. In the code, this is performed through the `runGit` function in `versioncheck.py`. Since `shell=True` is passed to `subproces.Popen`, this call is vulnerable to subject to command injection, as shell characters within arguments will be passed to the underlying shell. A concrete location where this can be triggered is in the `checkout_git_branch` endpoint. This endpoint stores a user-supplied remote and branch name into the `GIT_REMOTE` and `GIT_BRANCH` configuration keys without sanitization. Downstream, these keys are then fetched and passed directly into `runGit` using a format string. Hence, code execution can be obtained by using `$()` interpolation in a command. Version 2.16.0 contains a fix for the issue.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP.

A command injection vulnerability exists in the processAnalyticsReport method from the com.webos.service.cloudupload service on webOS version 5 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SoftAP configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Using a specially crafted URL command, a remote authenticated user can execute commands as root on the G-Cam and G-Code (Firmware Versions 1.12.0.25 and prior as well as the limited Versions 1.12.13.2 and 1.12.14.5).

The post-authentication command injection vulnerability in Zyxel NAS326 firmware versions through V5.21(AAZF.15)C0 and NAS542 firmware versions through V5.21(ABAG.12)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands by sending a crafted query parameter attached to the URL of an affected device’s web management interface.

The ping page of the administration panel in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via authenticated code injection over the network.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Poller reload setup in the configuration modules) allows OS Command Injection. On the poller parameters page, a user with high privilege is able to concatenate custom instructions into the poller reload command. This issue affects Infra Monitoring: from 24.10.0 before 24.10.13, from 24.04.0 before 24.04.18, from 23.10.0 before 23.10.28.

Adobe Commerce versions 2.4.6-p1 (and earlier), 2.4.5-p3 (and earlier) and 2.4.4-p4 (and earlier) are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead to arbitrary code execution by an admin-privilege authenticated attacker. Exploitation of this issue does not require user interaction.

PhotoShow 3.0 contains a remote code execution vulnerability that allows authenticated administrators to inject malicious commands through the exiftran path configuration. Attackers can exploit the ffmpeg configuration settings by base64 encoding a reverse shell command and executing it through a crafted video upload process.

MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.

Improper Neutralization of commands allowed to be executed via OTRS System Configuration e.g. SchedulerCronTaskModule using UnitTests modules allows any authenticated attacker with admin privileges local execution of Code.This issue affects OTRS: from 7.0.X before 7.0.45, from 8.0.X before 8.0.35; ((OTRS)) Community Edition: from 6.0.1 through 6.0.34.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in WN-7D36QR and WN-7D36QR/UE. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell.

Array Networks ArrayOS AG before 9.4.5.9 allows command injection, as exploited in the wild in August through December 2025.

SUNNET WMPro portal's file management function has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege or a privileged account can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operations or disrupt service.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.5, FortiWeb 7.4.0 through 7.4.10, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests or CLI commands.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset `0x4bde44`.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.

The GLPI Agent is a generic management agent. Prior to version 1.5, if glpi-agent is running remoteinventory task against an Unix platform with ssh command, an administrator user on the remote can manage to inject a command in a specific workflow the agent would run with the privileges it uses. In the case, the agent is running with administration privileges, a malicious user could gain high privileges on the computer glpi-agent is running on. A malicious user could also disclose all remote accesses the agent is configured with for remoteinventory task. This vulnerability has been patched in glpi-agent 1.5.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

A valid, authenticated LXCA user with elevated privileges may be able to execute command injections through crafted calls to a specific web API.

A vulnerability was found in Ruijie RG-BCR860 2.5.13 and classified as critical. This issue affects some unknown processing of the component Network Diagnostic Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-232547. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.

Manage::Certificates in Zen Load Balancer 3.10.1 allows remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the index.cgi cert_issuer, cert_division, cert_organization, cert_locality, cert_state, cert_country, or cert_email parameter.