In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function. When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of an arithmetic expression 2 << (netmask - mask_bits - 1) is subject to overflow due to a failure casting operands to a larger data type before performing the arithmetic. Note that it's harmless since the value will be checked at the next step. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate() The subs function argument may be NULL, so do not use it before the NULL check.

In the Linux kernel, the following vulnerability has been resolved: udp: Fix wildcard bind conflict check when using hash2 When binding a udp_sock to a local address and port, UDP uses two hashes (udptable->hash and udptable->hash2) for collision detection. The current code switches to "hash2" when hslot->count > 10. "hash2" is keyed by local address and local port. "hash" is keyed by local port only. The issue can be shown in the following bind sequence (pseudo code): bind(fd1, "[fd00::1]:8888") bind(fd2, "[fd00::2]:8888") bind(fd3, "[fd00::3]:8888") bind(fd4, "[fd00::4]:8888") bind(fd5, "[fd00::5]:8888") bind(fd6, "[fd00::6]:8888") bind(fd7, "[fd00::7]:8888") bind(fd8, "[fd00::8]:8888") bind(fd9, "[fd00::9]:8888") bind(fd10, "[fd00::10]:8888") /* Correctly return -EADDRINUSE because "hash" is used * instead of "hash2". udp_lib_lport_inuse() detects the * conflict. */ bind(fail_fd, "[::]:8888") /* After one more socket is bound to "[fd00::11]:8888", * hslot->count exceeds 10 and "hash2" is used instead. */ bind(fd11, "[fd00::11]:8888") bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */ The same issue applies to the IPv4 wildcard address "0.0.0.0" and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For example, if there are existing sockets bound to "192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or "[::ffff:0.0.0.0]:8888" can also miss the conflict when hslot->count > 10. TCP inet_csk_get_port() already has the correct check in inet_use_bhash2_on_bind(). Rename it to inet_use_hash2_on_bind() and move it to inet_hashtables.h so udp.c can reuse it in this fix.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential memory leaks in session setup Make sure to free cifs_ses::auth_key.response before allocating it as we might end up leaking memory in reconnect or mounting.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error.

In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption.

In the Linux kernel, the following vulnerability has been resolved: IB/ipoib: Fix mcast list locking Releasing the `priv->lock` while iterating the `priv->multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel): Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below) -----------------------------------+----------------------------------- ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work) spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...) list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev) &priv->multicast_list, list) | ipoib_mcast_join(dev, mcast) | spin_unlock_irq(&priv->lock) | | spin_lock_irqsave(&priv->lock, flags) | list_for_each_entry_safe(mcast, tmcast, | &priv->multicast_list, list) | list_del(&mcast->list); | list_add_tail(&mcast->list, &remove_list) | spin_unlock_irqrestore(&priv->lock, flags) spin_lock_irq(&priv->lock) | | ipoib_mcast_remove_list(&remove_list) (Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast, `priv->multicast_list` and we keep | remove_list, list) spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done) the other thread which is blocked | and the list is still valid on | it's stack.) Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent eventual sleeps. Unfortunately we could not reproduce the lockup and confirm this fix but based on the code review I think this fix should address such lockups. crash> bc 31 PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2" -- [exception RIP: ipoib_mcast_join_task+0x1b1] RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002 RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000 work (&priv->mcast_task{,.work}) RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000 &mcast->list RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000 R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00 mcast R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8 dev priv (&priv->lock) &priv->multicast_list (aka head) ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib] #6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967 crash> rx ff646f199a8c7e68 ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000 (empty) crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000 mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>, mcast_mutex.owner.counter = 0xff1c69998efec000 crash> b 8 PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0" -- #3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646 #4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib] #5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib] #6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib] #7 [ff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: don't let userspace block driver unbind In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Add date->evt_skb is NULL check fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0

In the Linux kernel, the following vulnerability has been resolved: pipe: wakeup wr_wait after setting max_usage Commit c73be61cede5 ("pipe: Add general notification queue support") a regression was introduced that would lock up resized pipes under certain conditions. See the reproducer in [1]. The commit resizing the pipe ring size was moved to a different function, doing that moved the wakeup for pipe->wr_wait before actually raising pipe->max_usage. If a pipe was full before the resize occured it would result in the wakeup never actually triggering pipe_write. Set @max_usage and @nr_accounted before waking writers if this isn't a watch queue. [Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues]

In the Linux kernel, the following vulnerability has been resolved: ovl: fix tmpfile leak Missed an error cleanup.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.

In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Add error handling for dma_map_sg() calls Macro dma_map_sg() may return 0 on error. This patch enables checks in case of the macro failure and ensures unmapping of previously mapped buffers with dma_unmap_sg(). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix NULL dereference on notify error path Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier registration for unsupported events") the call chains leading to the helper __scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to get an handler for the requested event key, while the current helper can still return a NULL when no handler could be found or created. Fix by forcing an ERR_PTR return value when the handler reference is NULL.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the reference count of bh when the call to nilfs_dat_translate() fails. If the reference count hits 0 and its owner page gets unlocked, bh may be freed. However, bh->b_page is dereferenced to put the page after that, which may result in a use-after-free bug. This patch moves the release operation after unlocking and putting the page. NOTE: The function in question is only called in GC, and in combination with current userland tools, address translation using DAT does not occur in that function, so the code path that causes this issue will not be executed. However, it is possible to run that code path by intentionally modifying the userland GC library or by calling the GC ioctl directly. [konishi.ryusuke@gmail.com: NOTE added to the commit log]

In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: virtio: Free driver_override when rpmsg_remove() Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac

In the Linux kernel, the following vulnerability has been resolved: Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()" This reverts commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293. ieee80211_if_free() is already called from free_netdev(ndev) because ndev->priv_destructor == ieee80211_if_free syzbot reported: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 PID: 10041 Comm: syz-executor.0 Not tainted 6.2.0-rc2-syzkaller-00388-g55b98837e37d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pcpu_get_page_chunk mm/percpu.c:262 [inline] RIP: 0010:pcpu_chunk_addr_search mm/percpu.c:1619 [inline] RIP: 0010:free_percpu mm/percpu.c:2271 [inline] RIP: 0010:free_percpu+0x186/0x10f0 mm/percpu.c:2254 Code: 80 3c 02 00 0f 85 f5 0e 00 00 48 8b 3b 48 01 ef e8 cf b3 0b 00 48 ba 00 00 00 00 00 fc ff df 48 8d 78 20 48 89 f9 48 c1 e9 03 <80> 3c 11 00 0f 85 3b 0e 00 00 48 8b 58 20 48 b8 00 00 00 00 00 fc RSP: 0018:ffffc90004ba7068 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88823ffe2b80 RCX: 0000000000000004 RDX: dffffc0000000000 RSI: ffffffff81c1f4e7 RDI: 0000000000000020 RBP: ffffe8fffe8fc220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 1ffffffff2179ab2 R12: ffff8880b983d000 R13: 0000000000000003 R14: 0000607f450fc220 R15: ffff88823ffe2988 FS: 00007fcb349de700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32220000 CR3: 000000004914f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> netdev_run_todo+0x6bf/0x1100 net/core/dev.c:10352 ieee80211_register_hw+0x2663/0x4040 net/mac80211/main.c:1411 mac80211_hwsim_new_radio+0x2537/0x4d80 drivers/net/wireless/mac80211_hwsim.c:4583 hwsim_new_radio_nl+0xa09/0x10f0 drivers/net/wireless/mac80211_hwsim.c:5176 genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968 genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x712/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2559 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: net: enetc: avoid deadlock in enetc_tx_onestep_tstamp() This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix memory leak of LZMA global compressed deduplication When stressing microLZMA EROFS images with the new global compressed deduplication feature enabled (`-Ededupe`), I found some short-lived temporary pages weren't properly released, which could slowly cause unexpected OOMs hours later. Let's fix it now (LZ4 and DEFLATE don't have this issue.)

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: qseecom: fix memory leaks in error paths Fix instances of returning error codes directly instead of jumping to the relevant labels where memory allocated for the SCM calls would be freed.

In the Linux kernel, the following vulnerability has been resolved: i915/perf: Fix NULL deref bugs with drm_dbg() calls When i915 perf interface is not available dereferencing it will lead to NULL dereferences. As returning -ENOTSUPP is pretty clear return when perf interface is not available. [tursulin: added stable tag] (cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889)

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue.

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config() scarlett2_usb_set_config() calls scarlett2_usb_get() but was not checking the result. Return the error if it fails rather than continuing with an invalid value.

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_s ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: fec: Use page_pool_put_full_page when freeing rx buffers The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.8305 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure Patch series "mm/damon/sysfs: fix memory leak and NULL dereference issues", v4. DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer dereference when a privileged user make wrong sequences of control. Fix those. This patch (of 3): When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(), param_ctx is leaked because the early return skips the cleanup at the out label. Destroy param_ctx before returning.

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error checks to *_ctl_get() The *_ctl_get() functions which call scarlett2_update_*() were not checking the return value. Fix to check the return value and pass to the caller.

In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL.

In the Linux kernel, the following vulnerability has been resolved: ceph: blocklist the kclient when receiving corrupted snap trace When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster.

In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables.

In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n".

In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic().

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exception exit lock checking for subprogs process_bpf_exit_full() passes check_lock = !curframe to check_resource_leak(), which is false in cases when bpf_throw() is called from a static subprog. This makes check_resource_leak() to skip validation of active_rcu_locks, active_preempt_locks, and active_irq_id on exception exits from subprogs. At runtime bpf_throw() unwinds the stack via ORC without releasing any user-acquired locks, which may cause various issues as the result. Fix by setting check_lock = true for exception exits regardless of curframe, since exceptions bypass all intermediate frame cleanup. Update the error message prefix to "bpf_throw" for exception exits to distinguish them from normal BPF_EXIT. Fix reject_subprog_with_rcu_read_lock test which was previously passing for the wrong reason. Test program returned directly from the subprog call without closing the RCU section, so the error was triggered by the unclosed RCU lock on normal exit, not by bpf_throw. Update __msg annotations for affected tests to match the new "bpf_throw" error prefix. The spin_lock case is not affected because they are already checked [1] at the call site in do_check_insn() before bpf_throw can run. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098

In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/

A null pointer dereference vulnerability was found in dpll_pin_parent_pin_set() in drivers/dpll/dpll_netlink.c in the Digital Phase Locked Loop (DPLL) subsystem in the Linux kernel. This issue could be exploited to trigger a denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pxp: Clear restart flag in pxp_start after jumping back If we don't clear the flag we'll keep jumping back at the beginning of the function once we reach the end. (cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0)

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix memory leak in octep_device_setup() In octep_device_setup(), if octep_ctrl_net_init() fails, the function returns directly without unmapping the mapped resources and freeing the allocated configuration memory. Fix this by jumping to the unsupported_dev label, which performs the necessary cleanup. This aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0 [<ffffffff8113f715>] task_numa_work+0x725/0xa00 [<ffffffff8110f878>] task_work_run+0x58/0x90 [<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0 [<ffffffff81dd78d5>] do_syscall_64+0x85/0x150 [<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/

In the Linux kernel, the following vulnerability has been resolved: mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs Patch series "mm: fixes for device-exclusive entries (hmm)", v2. Discussing the PageTail() call in make_device_exclusive_range() with Willy, I recently discovered [1] that device-exclusive handling does not properly work with THP, making the hmm-tests selftests fail if THPs are enabled on the system. Looking into more details, I found that hugetlb is not properly fenced, and I realized that something that was bugging me for longer -- how device-exclusive entries interact with mapcounts -- completely breaks migration/swapout/split/hwpoison handling of these folios while they have device-exclusive PTEs. The program below can be used to allocate 1 GiB worth of pages and making them device-exclusive on a kernel with CONFIG_TEST_HMM. Once they are device-exclusive, these folios cannot get swapped out (proc$pid/smaps_rollup will always indicate 1 GiB RSS no matter how much one forces memory reclaim), and when having a memory block onlined to ZONE_MOVABLE, trying to offline it will loop forever and complain about failed migration of a page that should be movable. # echo offline > /sys/devices/system/memory/memory136/state # echo online_movable > /sys/devices/system/memory/memory136/state # ./hmm-swap & ... wait until everything is device-exclusive # echo offline > /sys/devices/system/memory/memory136/state [ 285.193431][T14882] page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x7f20671f7 pfn:0x442b6a [ 285.196618][T14882] memcg:ffff888179298000 [ 285.198085][T14882] anon flags: 0x5fff0000002091c(referenced|uptodate| dirty|active|owner_2|swapbacked|node=1|zone=3|lastcpupid=0x7ff) [ 285.201734][T14882] raw: ... [ 285.204464][T14882] raw: ... [ 285.207196][T14882] page dumped because: migration failure [ 285.209072][T14882] page_owner tracks the page as allocated [ 285.210915][T14882] page last allocated via order 0, migratetype Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_COMP|__GFP_ZERO), id 14926, tgid 14926 (hmm-swap), ts 254506295376, free_ts 227402023774 [ 285.216765][T14882] post_alloc_hook+0x197/0x1b0 [ 285.218874][T14882] get_page_from_freelist+0x76e/0x3280 [ 285.220864][T14882] __alloc_frozen_pages_noprof+0x38e/0x2740 [ 285.223302][T14882] alloc_pages_mpol+0x1fc/0x540 [ 285.225130][T14882] folio_alloc_mpol_noprof+0x36/0x340 [ 285.227222][T14882] vma_alloc_folio_noprof+0xee/0x1a0 [ 285.229074][T14882] __handle_mm_fault+0x2b38/0x56a0 [ 285.230822][T14882] handle_mm_fault+0x368/0x9f0 ... This series fixes all issues I found so far. There is no easy way to fix without a bigger rework/cleanup. I have a bunch of cleanups on top (some previous sent, some the result of the discussion in v1) that I will send out separately once this landed and I get to it. I wish we could just use some special present PROT_NONE PTEs instead of these (non-present, non-none) fake-swap entries; but that just results in the same problem we keep having (lack of spare PTE bits), and staring at other similar fake-swap entries, that ship has sailed. With this series, make_device_exclusive() doesn't actually belong into mm/rmap.c anymore, but I'll leave moving that for another day. I only tested this series with the hmm-tests selftests due to lack of HW, so I'd appreciate some testing, especially if the interaction between two GPUs wanting a device-exclusive entry works as expected. <program> #include <stdio.h> #include <fcntl.h> #include <stdint.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/ioctl.h> #include <linux/types.h> #include <linux/ioctl.h> #define HMM_DMIRROR_EXCLUSIVE _IOWR('H', 0x05, struct hmm_dmirror_cmd) struct hmm_dmirror_cmd { __u64 addr; __u64 ptr; __u64 npages; __u64 cpages; __u64 faults; }; const size_t size = 1 * 1024 * 1024 * 1024ul; const size_t chunk_size = 2 * 1024 * 1024ul; int m ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nvmet-fcloop: Check remoteport port_state before calling done callback In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to fail and the nvme-fc transport layer itself will directly call nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free the lsrsp resources. Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state. If online, then lsrsp->done callback will free the lsrsp. Else, return -ENODEV to signal the nvme-fc transport to handle freeing lsrsp.

In the Linux kernel, the following vulnerability has been resolved: idpf: Fix RSS LUT NULL pointer crash on early ethtool operations The RSS LUT is not initialized until the interface comes up, causing the following NULL pointer crash when ethtool operations like rxhash on/off are performed before the interface is brought up for the first time. Move RSS LUT initialization from ndo_open to vport creation to ensure LUT is always available. This enables RSS configuration via ethtool before bringing the interface up. Simplify LUT management by maintaining all changes in the driver's soft copy and programming zeros to the indirection table when rxhash is disabled. Defer HW programming until the interface comes up if it is down during rxhash and LUT configuration changes. Steps to reproduce: ** Load idpf driver; interfaces will be created modprobe idpf ** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off [89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000 [89408.371908] #PF: supervisor read access in kernel mode [89408.371924] #PF: error_code(0x0000) - not-present page [89408.371940] PGD 0 P4D 0 [89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [89408.372052] RIP: 0010:memcpy_orig+0x16/0x130 [89408.372310] Call Trace: [89408.372317] <TASK> [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf] [89408.372363] __netdev_update_features+0x295/0xde0 [89408.372384] ethnl_set_features+0x15e/0x460 [89408.372406] genl_family_rcv_msg_doit+0x11f/0x180 [89408.372429] genl_rcv_msg+0x1ad/0x2b0 [89408.372446] ? __pfx_ethnl_set_features+0x10/0x10 [89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10 [89408.372482] netlink_rcv_skb+0x58/0x100 [89408.372502] genl_rcv+0x2c/0x50 [89408.372516] netlink_unicast+0x289/0x3e0 [89408.372533] netlink_sendmsg+0x215/0x440 [89408.372551] __sys_sendto+0x234/0x240 [89408.372571] __x64_sys_sendto+0x28/0x30 [89408.372585] x64_sys_call+0x1909/0x1da0 [89408.372604] do_syscall_64+0x7a/0xfa0 [89408.373140] ? clear_bhb_loop+0x60/0xb0 [89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e [89408.378887] </TASK> <snip>

In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Root Cause: CPU0 CPU1 mount perf_event umount net_prio cgroup1_get_tree cgroup_kill_sb rebind_subsystems // root destruction enqueues // cgroup_destroy_wq // kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to die Problem scenario: 1. CPU0 mounts perf_event (rebind_subsystems) 2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work 3. A dying perf_event CSS gets queued for offline after root destruction 4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1) Solution: Split cgroup_destroy_wq into three dedicated workqueues: cgroup_offline_wq – Handles CSS offline operations cgroup_release_wq – Manages resource release cgroup_free_wq – Performs final memory deallocation This separation eliminates blocking in the CSS free path while waiting for offline operations to complete. [1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers

In the Linux kernel, the following vulnerability has been resolved: iommu/iova: Fix alloc iova overflows issue In __alloc_and_insert_iova_range, there is an issue that retry_pfn overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will overflow. As a result, if the retry logic is executed, low_pfn is updated to 0, and then new_pfn < low_pfn returns false to make the allocation successful. This issue occurs in the following two situations: 1. The first iova size exceeds the domain size. When initializing iova domain, iovad->cached_node is assigned as iovad->anchor. For example, the iova domain size is 10M, start_pfn is 0x1_F000_0000, and the iova size allocated for the first time is 11M. The following is the log information, new->pfn_lo is smaller than iovad->cached_node. Example log as follows: [ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00 [ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff 2. The node with the largest iova->pfn_lo value in the iova domain is deleted, iovad->cached_node will be updated to iovad->anchor, and then the alloc iova size exceeds the maximum iova size that can be allocated in the domain. After judging that retry_pfn is less than limit_pfn, call retry_pfn+1 to fix the overflow issue.

In the Linux kernel, the following vulnerability has been resolved: vfio/xe: Reorganize the init to decouple migration from reset Attempting to issue reset on VF devices that don't support migration leads to the following: BUG: unable to handle page fault for address: 00000000000011f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy) Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe] Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89 RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202 RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800 R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0 FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0 PKRU: 55555554 Call Trace: <TASK> xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci] pci_dev_restore+0x3b/0x80 pci_reset_function+0x109/0x140 reset_store+0x5c/0xb0 dev_attr_store+0x17/0x40 sysfs_kf_write+0x72/0x90 kernfs_fop_write_iter+0x161/0x1f0 vfs_write+0x261/0x440 ksys_write+0x69/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x259/0x26e0 do_syscall_64+0xcb/0x1500 ? __fput+0x1a2/0x2d0 ? fput_close_sync+0x3d/0xa0 ? __x64_sys_close+0x3e/0x90 ? x64_sys_call+0x1b7c/0x26e0 ? do_syscall_64+0x109/0x1500 ? __task_pid_nr_ns+0x68/0x100 ? __do_sys_getpid+0x1d/0x30 ? x64_sys_call+0x10b5/0x26e0 ? do_syscall_64+0x109/0x1500 ? putname+0x41/0x90 ? do_faccessat+0x1e8/0x300 ? __x64_sys_access+0x1c/0x30 ? x64_sys_call+0x1822/0x26e0 ? do_syscall_64+0x109/0x1500 ? tick_program_event+0x43/0xa0 ? hrtimer_interrupt+0x126/0x260 ? irqentry_exit+0xb2/0x710 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7877d5f1c5a4 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4 RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009 RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9 R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0 </TASK> This is caused by the fact that some of the xe_vfio_pci_core_device members needed for handling reset are only initialized as part of migration init. Fix the problem by reorganizing the code to decouple VF init from migration init.