In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix handling of the failed kzalloc() memory allocation On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the following error report: ./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns NULL not ERR_PTR on failure kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion.

In the Linux kernel, the following vulnerability has been resolved: fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() When information such as info->screen_base is not ready, calling sh7760fb_free_mem() does not release memory correctly. Call dma_free_coherent() instead.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry.

In the Linux kernel, the following vulnerability has been resolved: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a).

In the Linux kernel, the following vulnerability has been resolved: irqchip/riscv-aplic: Prevent crash when MSI domain is missing If the APLIC driver is probed before the IMSIC driver, the parent MSI domain will be missing, which causes a NULL pointer dereference in msi_create_device_irq_domain(). Avoid this by deferring probe until the parent MSI domain is available. Use dev_err_probe() to avoid printing an error message when returning -EPROBE_DEFER.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113.

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in modify_prefix_route() syzbot found a NULL deref [1] in modify_prefix_route(), caused by one fib6_info without a fib6_table pointer set. This can happen for net->ipv6.fib6_null_entry [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089 Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84 RSP: 0018:ffffc900035d7268 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030 R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000 FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5849 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x33/0x40 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] modify_prefix_route+0x30b/0x8b0 net/ipv6/addrconf.c:4831 inet6_addr_modify net/ipv6/addrconf.c:4923 [inline] inet6_rtm_newaddr+0x12c7/0x1ab0 net/ipv6/addrconf.c:5055 rtnetlink_rcv_msg+0x3c7/0xea0 net/core/rtnetlink.c:6920 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2583 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2637 __sys_sendmsg+0x16e/0x220 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fd1dcef8b79 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc59cc4378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd1dcef8b79 RDX: 0000000000040040 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00000000000113fd R08: 0000000000000006 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007ffc59cc438c R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK>

In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping.

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.

In the Linux kernel, the following vulnerability has been resolved: mm/gup: handle NULL pages in unpin_user_pages() The recent addition of "pofs" (pages or folios) handling to gup has a flaw: it assumes that unpin_user_pages() handles NULL pages in the pages** array. That's not the case, as I discovered when I ran on a new configuration on my test machine. Fix this by skipping NULL pages in unpin_user_pages(), just like unpin_folios() already does. Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux 6.12, and running this: tools/testing/selftests/mm/gup_longterm ...I get the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0 ... Call Trace: <TASK> ? __die_body+0x66/0xb0 ? page_fault_oops+0x30c/0x3b0 ? do_user_addr_fault+0x6c3/0x720 ? irqentry_enter+0x34/0x60 ? exc_page_fault+0x68/0x100 ? asm_exc_page_fault+0x22/0x30 ? sanity_check_pinned_pages+0x3a/0x2d0 unpin_user_pages+0x24/0xe0 check_and_migrate_movable_pages_or_folios+0x455/0x4b0 __gup_longterm_locked+0x3bf/0x820 ? mmap_read_lock_killable+0x12/0x50 ? __pfx_mmap_read_lock_killable+0x10/0x10 pin_user_pages+0x66/0xa0 gup_test_ioctl+0x358/0xb20 __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/

A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags [WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity.

Insufficient validation of the IOCTL (Input Output Control) input buffer in AMD μProf may allow an authenticated user to send an arbitrary address potentially resulting in a Windows crash leading to denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode(). Add a check to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context Unaligned access exception can be triggered in irq-enabled context such as user mode, in this case do_ale() may call get_user() which may cause sleep. Then we will get: BUG: sleeping function called from invalid context at arch/loongarch/kernel/access-helper.h:7 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 129, name: modprobe preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 129 Comm: modprobe Tainted: G W 6.12.0-rc1+ #1723 Tainted: [W]=WARN Stack : 9000000105e0bd48 0000000000000000 9000000003803944 9000000105e08000 9000000105e0bc70 9000000105e0bc78 0000000000000000 0000000000000000 9000000105e0bc78 0000000000000001 9000000185e0ba07 9000000105e0b890 ffffffffffffffff 9000000105e0bc78 73924b81763be05b 9000000100194500 000000000000020c 000000000000000a 0000000000000000 0000000000000003 00000000000023f0 00000000000e1401 00000000072f8000 0000007ffbb0e260 0000000000000000 0000000000000000 9000000005437650 90000000055d5000 0000000000000000 0000000000000003 0000007ffbb0e1f0 0000000000000000 0000005567b00490 0000000000000000 9000000003803964 0000007ffbb0dfec 00000000000000b0 0000000000000007 0000000000000003 0000000000071c1d ... Call Trace: [<9000000003803964>] show_stack+0x64/0x1a0 [<9000000004c57464>] dump_stack_lvl+0x74/0xb0 [<9000000003861ab4>] __might_resched+0x154/0x1a0 [<900000000380c96c>] emulate_load_store_insn+0x6c/0xf60 [<9000000004c58118>] do_ale+0x78/0x180 [<9000000003801bc8>] handle_ale+0x128/0x1e0 So enable IRQ if unaligned access exception is triggered in irq-enabled context to fix it.

In the Linux kernel, the following vulnerability has been resolved: net: Fix an unsafe loop on the list The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list.

Insufficient validation of the IOCTL (Input Output Control) input buffer in AMD μProf may allow an authenticated user to send an arbitrary buffer potentially resulting in a Windows crash leading to denial of service.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Fix circular lock in iso_listen_bis This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth]

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx() build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

The Linux kernel io_uring IORING_OP_SOCKET operation contained a double free in function __sys_socket_file() in file net/socket.c. This issue was introduced in da214a475f8bd1d3e9e7a19ddfeb4d1617551bab and fixed in 649c15c7691e9b13cbe9bf6c65c365350e056067.

In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled).

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix 6 GHz scan construction If more than 255 colocated APs exist for the set of all APs found during 2.4/5 GHz scanning, then the 6 GHz scan construction will loop forever since the loop variable has type u8, which can never reach the number found when that's bigger than 255, and is stored in a u32 variable. Also move it into the loops to have a smaller scope. Using a u32 there is fine, we limit the number of APs in the scan list and each has a limit on the number of RNR entries due to the frame size. With a limit of 1000 scan results, a frame size upper bound of 4096 (really it's more like ~2300) and a TBTT entry size of at least 11, we get an upper bound for the number of ~372k, well in the bounds of a u32.

In the Linux kernel, the following vulnerability has been resolved: tpm: Lock TPM chip in tpm_pm_suspend() first Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix receive ring space parameters when XDP is active The MTU setting at the time an XDP multi-buffer is attached determines whether the aggregation ring will be used and the rx_skb_func handler. This is done in bnxt_set_rx_skb_mode(). If the MTU is later changed, the aggregation ring setting may need to be changed and it may become out-of-sync with the settings initially done in bnxt_set_rx_skb_mode(). This may result in random memory corruption and crashes as the HW may DMA data larger than the allocated buffer size, such as: BUG: kernel NULL pointer dereference, address: 00000000000003c0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1 Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021 RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en] Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202 RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380 RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980 R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990 FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> __bnxt_poll_work+0x1c2/0x3e0 [bnxt_en] To address the issue, we now call bnxt_set_rx_skb_mode() within bnxt_change_mtu() to properly set the AGG rings configuration and update rx_skb_func based on the new MTU value. Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on the current MTU.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]

In the Linux kernel, the following vulnerability has been resolved: maple_tree: correct tree corruption on spanning store Patch series "maple_tree: correct tree corruption on spanning store", v3. There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm. This bug seems far more likely to happen since commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point at which reports started to be submitted concerning this bug. We were made definitely aware of the bug thanks to the kind efforts of Bert Karwatzki who helped enormously in my being able to track this down and identify the cause of it. The bug arises when an attempt is made to perform a spanning store across two leaf nodes, where the right leaf node is the rightmost child of the shared parent, AND the store completely consumes the right-mode node. This results in mas_wr_spanning_store() mitakenly duplicating the new and existing entries at the maximum pivot within the range, and thus maple tree corruption. The fix patch corrects this by detecting this scenario and disallowing the mistaken duplicate copy. The fix patch commit message goes into great detail as to how this occurs. This series also includes a test which reliably reproduces the issue, and asserts that the fix works correctly. Bert has kindly tested the fix and confirmed it resolved his issues. Also Mikhail Gavrilov kindly reported what appears to be precisely the same bug, which this fix should also resolve. This patch (of 2): There has been a subtle bug present in the maple tree implementation from its inception. This arises from how stores are performed - when a store occurs, it will overwrite overlapping ranges and adjust the tree as necessary to accommodate this. A range may always ultimately span two leaf nodes. In this instance we walk the two leaf nodes, determine which elements are not overwritten to the left and to the right of the start and end of the ranges respectively and then rebalance the tree to contain these entries and the newly inserted one. This kind of store is dubbed a 'spanning store' and is implemented by mas_wr_spanning_store(). In order to reach this stage, mas_store_gfp() invokes mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to walk the tree and update the object (mas) to traverse to the location where the write should be performed, determining its store type. When a spanning store is required, this function returns false stopping at the parent node which contains the target range, and mas_wr_store_type() marks the mas->store_type as wr_spanning_store to denote this fact. When we go to perform the store in mas_wr_spanning_store(), we first determine the elements AFTER the END of the range we wish to store (that is, to the right of the entry to be inserted) - we do this by walking to the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we have just determined contains the range over which we intend to write. We then turn our attention to the entries to the left of the entry we are inserting, whose state is represented by l_mas, and copy these into a 'big node', which is a special node which contains enough slots to contain two leaf node's worth of data. We then copy the entry we wish to store immediately after this - the copy and the insertion of the new entry is performed by mas_store_b_node(). After this we copy the elements to the right of the end of the range which we are inserting, if we have not exceeded the length of the node (i.e. r_mas.offset <= r_mas.end). Herein lies the bug - under very specific circumstances, this logic can break and corrupt the maple tree. Consider the following tree: Height 0 Root Node / \ pivot = 0xffff / \ pivot = ULONG_MAX / ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fs, lock FTE when checking if active The referenced commits introduced a two-step process for deleting FTEs: - Lock the FTE, delete it from hardware, set the hardware deletion function to NULL and unlock the FTE. - Lock the parent flow group, delete the software copy of the FTE, and remove it from the xarray. However, this approach encounters a race condition if a rule with the same match value is added simultaneously. In this scenario, fs_core may set the hardware deletion function to NULL prematurely, causing a panic during subsequent rule deletions. To prevent this, ensure the active flag of the FTE is checked under a lock, which will prevent the fs_core layer from attaching a new steering rule to an FTE that is in the process of deletion. [ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func [ 438.968205] ------------[ cut here ]------------ [ 438.968654] refcount_t: decrement hit 0; leaking memory. [ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110 [ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower] [ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8 [ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110 [ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 [ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286 [ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000 [ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0 [ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0 [ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0 [ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0 [ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 [ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0 [ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.986507] Call Trace: [ 438.986799] <TASK> [ 438.987070] ? __warn+0x7d/0x110 [ 438.987426] ? refcount_warn_saturate+0xfb/0x110 [ 438.987877] ? report_bug+0x17d/0x190 [ 438.988261] ? prb_read_valid+0x17/0x20 [ 438.988659] ? handle_bug+0x53/0x90 [ 438.989054] ? exc_invalid_op+0x14/0x70 [ 438.989458] ? asm_exc_invalid_op+0x16/0x20 [ 438.989883] ? refcount_warn_saturate+0xfb/0x110 [ 438.990348] mlx5_del_flow_rules+0x2f7/0x340 [mlx5_core] [ 438.990932] __mlx5_eswitch_del_rule+0x49/0x170 [mlx5_core] [ 438.991519] ? mlx5_lag_is_sriov+0x3c/0x50 [mlx5_core] [ 438.992054] ? xas_load+0x9/0xb0 [ 438.992407] mlx5e_tc_rule_unoffload+0x45/0xe0 [mlx5_core] [ 438.993037] mlx5e_tc_del_fdb_flow+0x2a6/0x2e0 [mlx5_core] [ 438.993623] mlx5e_flow_put+0x29/0x60 [mlx5_core] [ 438.994161] mlx5e_delete_flower+0x261/0x390 [mlx5_core] [ 438.994728] tc_setup_cb_destroy+0xb9/0x190 [ 438.995150] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] [ 438.995650] fl_change+0x11a4/0x13c0 [cls_flower] [ 438.996105] tc_new_tfilter+0x347/0xbc0 [ 438.996503] ? __ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not let BPF test infra emit invalid GSO types to stack Yinhao et al. reported that their fuzzer tool was able to trigger a skb_warn_bad_offload() from netif_skb_features() -> gso_features_check(). When a BPF program - triggered via BPF test infra - pushes the packet to the loopback device via bpf_clone_redirect() then mentioned offload warning can be seen. GSO-related features are then rightfully disabled. We get into this situation due to convert___skb_to_skb() setting gso_segs and gso_size but not gso_type. Technically, it makes sense that this warning triggers since the GSO properties are malformed due to the gso_type. Potentially, the gso_type could be marked non-trustworthy through setting it at least to SKB_GSO_DODGY without any other specific assumptions, but that also feels wrong given we should not go further into the GSO engine in the first place. The checks were added in 121d57af308d ("gso: validate gso_type in GSO handlers") because there were malicious (syzbot) senders that combine a protocol with a non-matching gso_type. If we would want to drop such packets, gso_features_check() currently only returns feature flags via netif_skb_features(), so one location for potentially dropping such skbs could be validate_xmit_unreadable_skb(), but then otoh it would be an additional check in the fast-path for a very corner case. Given bpf_clone_redirect() is the only place where BPF test infra could emit such packets, lets reject them right there.

In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: fix misused mapping_large_folio_support() for anon folios When I did a large folios split test, a WARNING "[ 5059.122759][ T166] Cannot split file folio to non-0 order" was triggered. But the test cases are only for anonmous folios. while mapping_large_folio_support() is only reasonable for page cache folios. In split_huge_page_to_list_to_order(), the folio passed to mapping_large_folio_support() maybe anonmous folio. The folio_test_anon() check is missing. So the split of the anonmous THP is failed. This is also the same for shmem_mapping(). We'd better add a check for both. But the shmem_mapping() in __split_huge_page() is not involved, as for anonmous folios, the end parameter is set to -1, so (head[i].index >= end) is always false. shmem_mapping() is not called. Also add a VM_WARN_ON_ONCE() in mapping_large_folio_support() for anon mapping, So we can detect the wrong use more easily. THP folios maybe exist in the pagecache even the file system doesn't support large folio, it is because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, khugepaged will try to collapse read-only file-backed pages to THP. But the mapping does not actually support multi order large folios properly. Using /sys/kernel/debug/split_huge_pages to verify this, with this patch, large anon THP is successfully split and the warning is ceased.

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix quota root leak after quota disable failure If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps). Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted.

In the Linux kernel, the following vulnerability has been resolved: mm: prevent derefencing NULL ptr in pfn_section_valid() Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") changed pfn_section_valid() to add a READ_ONCE() call around "ms->usage" to fix a race with section_deactivate() where ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough to prevent NULL pointer dereference. We need to check its value before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; }

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix WARN in ivpu_ipc_send_receive_internal() Move pm_runtime_set_active() to ivpu_pm_init() so when ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable() it already has correct runtime state, even if last resume was not successful.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended.

In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Improve MSG_ZEROCOPY error handling Add a missing kfree_skb() to prevent memory leaks.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty() may cause a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because, since the tracepoint was added in mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, nilfs_grab_buffer(), which grabs a buffer to read (or create) a block of metadata, including b-tree node blocks, does not set the block device, but instead does so only if the buffer is not in the "uptodate" state for each of its caller block reading functions. However, if the uptodate flag is set on a folio/page, and the buffer heads are detached from it by try_to_free_buffers(), and new buffer heads are then attached by create_empty_buffers(), the uptodate flag may be restored to each buffer without the block device being set to bh->b_bdev, and mark_buffer_dirty() may be called later in that state, resulting in the bug mentioned above. Fix this issue by making nilfs_grab_buffer() always set the block device of the super block structure to the buffer head, regardless of the state of the buffer's uptodate flag.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered.

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL dereference in rt6_probe() syzbot caught a NULL dereference in rt6_probe() [1] Bail out if __in6_dev_get() returns NULL. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f] CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline] RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758 Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19 RSP: 0018:ffffc900034af070 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000 RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000 FS: 00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784 nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496 __find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825 find_rr_leaf net/ipv6/route.c:853 [inline] rt6_select net/ipv6/route.c:897 [inline] fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195 ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231 pol_lookup_func include/net/ip6_fib.h:616 [inline] fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline] ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651 ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147 ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250 rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898 inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x4b8/0x5c0 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x1f8/0x260 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f