In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check the alloc_workqueue return value in radeon_crtc_init() check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL?

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: qseecom: fix memory leaks in error paths Fix instances of returning error codes directly instead of jumping to the relevant labels where memory allocated for the SCM calls would be freed.

In the Linux kernel, the following vulnerability has been resolved: mm: memory-failure: update ttu flag inside unmap_poisoned_folio Patch series "mm: memory_failure: unmap poisoned folio during migrate properly", v3. Fix two bugs during folio migration if the folio is poisoned. This patch (of 3): Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in order to stop send SIGBUS signal when accessing an error page after a memory error on a clean folio. However during page migration, anon folio must be set with TTU_HWPOISON during unmap_*(). For pagecache we need some policy just like the one in hwpoison_user_mappings to set this flag. So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to handle this warning properly. Warning will be produced during unamp poison folio with the following log: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c Modules linked in: CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0x8fc/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0x8fc/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- [mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix disable_otg_wa logic [Why] When switching to another HDMI mode, we are unnecesarilly disabling/enabling FIFO causing both HPO and DIG registers to be set at the same time when only HPO is supposed to be set. This can lead to a system hang the next time we change refresh rates as there are cases when we don't disable OTG/FIFO but FIFO is enabled when it isn't supposed to be. [How] Removing the enable/disable FIFO entirely.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix hang/underflow when transitioning to ODM4:1 [Why] Under some circumstances, disabling an OPTC and attempting to reclaim its OPP(s) for a different OPTC could cause a hang/underflow due to OPPs not being properly disconnected from the disabled OPTC. [How] Ensure that all OPPs are unassigned from an OPTC when it gets disabled.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix peer flow lists handling The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.0 ---truncated---

The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Refactor DMCUB enter/exit idle interface [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] We need to exit out of the idle state prior to sending a command, but the process that performs the exit also invokes a command itself. Fixing this issue involves the following: 1. Using a software state to track whether or not we need to start the process to exit idle or notify idle. It's possible for the hardware to have exited an idle state without driver knowledge, but entering one is always restricted to a driver allow - which makes the SW state vs HW state mismatch issue purely one of optimization, which should seldomly be hit, if at all. 2. Refactor any instances of exit/notify idle to use a single wrapper that maintains this SW state. This works simialr to dc_allow_idle_optimizations, but works at the DMCUB level and makes sure the state is marked prior to any notify/exit idle so we don't enter an infinite loop. 3. Make sure we exit out of idle prior to sending any commands or waiting for DMCUB idle. This patch takes care of 1/2. A future patch will take care of wrapping DMCUB command submission with calls to this new interface.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix deadlock or deadcode of misusing dget() The lock order is incorrect between denty and its parent, we should always make sure that the parent get the lock first. But since this deadcode is never used and the parent dir will always be set from the callers, let's just remove it.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: virtio: Free driver_override when rpmsg_remove() Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: Check IRQ data before use In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: pipe: wakeup wr_wait after setting max_usage Commit c73be61cede5 ("pipe: Add general notification queue support") a regression was introduced that would lock up resized pipes under certain conditions. See the reproducer in [1]. The commit resizing the pipe ring size was moved to a different function, doing that moved the wakeup for pipe->wr_wait before actually raising pipe->max_usage. If a pipe was full before the resize occured it would result in the wakeup never actually triggering pipe_write. Set @max_usage and @nr_accounted before waking writers if this isn't a watch queue. [Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues]

In the Linux kernel, the following vulnerability has been resolved: NTB: fix possible name leak in ntb_register_device() If device_register() fails in ntb_register_device(), the device name allocated by dev_set_name() should be freed. As per the comment in device_register(), callers should use put_device() to give up the reference in the error path. So fix this by calling put_device() in the error path so that the name can be freed in kobject_cleanup(). As a result of this, put_device() in the error path of ntb_register_device() is removed and the actual error is returned. [mani: reworded commit message]

In the Linux kernel, the following vulnerability has been resolved: riscv: Check if the code to patch lies in the exit section Otherwise we fall through to vmalloc_to_page() which panics since the address does not lie in the vmalloc region.

In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG() after failure to insert delayed dir index item Instead of calling BUG() when we fail to insert a delayed dir index item into the delayed node's tree, we can just release all the resources we have allocated/acquired before and return the error to the caller. This is fine because all existing call chains undo anything they have done before calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending snapshots in the transaction commit path). So remove the BUG() call and do proper error handling. This relates to a syzbot report linked below, but does not fix it because it only prevents hitting a BUG(), it does not fix the issue where somehow we attempt to use twice the same index number for different index items.

dm_table_create in drivers/md/dm-table.c in the Linux kernel through 6.7.4 can attempt to (in alloc_targets) allocate more than INT_MAX bytes, and crash, because of a missing check for struct dm_ioctl.target_count.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change ocfs2 rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.

In the Linux kernel, the following vulnerability has been resolved: Revert "net/mlx5: Block entering switchdev mode with ns inconsistency" This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b. The revert is required due to the suspicion it is not good for anything and cause crash.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support.

In the Linux kernel, the following vulnerability has been resolved: power: supply: Fix null pointer dereference in smb2_probe devm_kasprintf and devm_kzalloc return a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false.

In the Linux kernel, the following vulnerability has been resolved: serial: imx: fix tx statemachine deadlock When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND.

A memory leak in rsyslog before 5.7.6 was found in the way deamon processed log messages are logged when $RepeatedMsgReduction was enabled. A local attacker could use this flaw to cause a denial of the rsyslogd daemon service by crashing the service via a sequence of repeated log messages sent within short periods of time.

In the Linux kernel, the following vulnerability has been resolved: ACPI: LPIT: Avoid u32 multiplication overflow In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough (> UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line that leads to NULL pointer dereference in upi_fill_topology()

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is.

In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit.

In the Linux kernel, the following vulnerability has been resolved: iio: core: fix memleak in iio_device_register_sysfs When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in compound request `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type On 64-bit platforms, the pfn_to_kaddr() macro requires that the input value is 64 bits in order to ensure that valid address bits don't get lost when shifting that input by PAGE_SHIFT to calculate the physical address to provide a virtual address for. One such example is in pvalidate_pages() (used by SEV-SNP guests), where the GFN in the struct used for page-state change requests is a 40-bit bit-field, so attempts to pass this GFN field directly into pfn_to_kaddr() ends up causing guest crashes when dealing with addresses above the 1TB range due to the above. Fix this issue with SEV-SNP guests, as well as any similar cases that might cause issues in current/future code, by using an inline function, instead of a macro, so that the input is implicitly cast to the expected 64-bit input type prior to performing the shift operation. While it might be argued that the issue is on the caller side, other archs/macros have taken similar approaches to deal with instances like this, such as ARM explicitly casting the input to phys_addr_t: e48866647b48 ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()") A C inline function is even better though. [ mingo: Refined the changelog some more & added __always_inline. ]

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config() scarlett2_usb_set_config() calls scarlett2_usb_get() but was not checking the result. Return the error if it fails rather than continuing with an invalid value.

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before sending a command [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock.

A locally locally exploitable DOS vulnerability was found in pax-linux versions 2.6.32.33-test79.patch, 2.6.38-test3.patch, and 2.6.37.4-test14.patch. A bad bounds check in arch_get_unmapped_area_topdown triggered by programs doing an mmap after a MAP_GROWSDOWN mmap will create an infinite loop condition without releasing the VM semaphore eventually leading to a system crash.

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix out of bounds access for empty sysctl registers When registering tables to the sysctl subsystem there is a check to see if header is a permanently empty directory (used for mounts). This check evaluates the first element of the ctl_table. This results in an out of bounds evaluation when registering empty directories. The function register_sysctl_mount_point now passes a ctl_table of size 1 instead of size 0. It now relies solely on the type to identify a permanently empty register. Make sure that the ctl_table has at least one element before testing for permanent emptiness.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TX CQE error handling For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging.

In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP:  b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles.

In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Add error handling for dma_map_sg() calls Macro dma_map_sg() may return 0 on error. This patch enables checks in case of the macro failure and ensures unmapping of previously mapped buffers with dma_unmap_sg(). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2

In the Linux kernel, the following vulnerability has been resolved: freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") broke call_usermodehelper_exec() for the KILLABLE case. Specifically it was missed that the second, unconditional, wait_for_completion() was not optional and ensures the on-stack completion is unused before going out-of-scope.

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: restart beacon queue when hardware reset When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw().

In the Linux kernel, the following vulnerability has been resolved: gpio: sim: fix a memory leak Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO hog structures never being freed.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffff ---truncated---