In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked() When 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") moved the error messages dumping so that they don't need to be issued by the callers, it missed the case where __sev_firmware_shutdown() calls __sev_platform_shutdown_locked() with a NULL argument which leads to a NULL ptr deref on the shutdown path, during suspend to disk: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022 RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp] That rIP is: 00000000000006fd <__sev_platform_shutdown_locked.cold>: 6fd: 8b 13 mov (%rbx),%edx 6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi 703: 89 c1 mov %eax,%ecx Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e RSP: 0018:ffffc90005467d00 EFLAGS: 00010282 RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ and %rbx is nice and clean. Call Trace: <TASK> __sev_firmware_shutdown.isra.0 sev_dev_destroy psp_dev_destroy sp_destroy pci_device_shutdown device_shutdown kernel_power_off hibernate.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Pass in a pointer to the function-local error var in the caller. With that addressed, suspending the ccp shows the error properly at least: ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110 SEV-SNP: Leaking PFN range 0x146800-0x146a00 SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00] ... ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0 ACPI: PM: Preparing to enter system sleep state S5 kvm: exiting hardware virtualization reboot: Power down Btw, this driver is crying to be cleaned up to pass in a proper I/O struct which can be used to store information between the different functions, otherwise stuff like that will happen in the future again.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown()

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.

In the Linux kernel, the following vulnerability has been resolved: pnode: terminate at peers of source The propagate_mnt() function handles mount propagation when creating mounts and propagates the source mount tree @source_mnt to all applicable nodes of the destination propagation mount tree headed by @dest_mnt. Unfortunately it contains a bug where it fails to terminate at peers of @source_mnt when looking up copies of the source mount that become masters for copies of the source mount tree mounted on top of slaves in the destination propagation tree causing a NULL dereference. Once the mechanics of the bug are understood it's easy to trigger. Because of unprivileged user namespaces it is available to unprivileged users. While fixing this bug we've gotten confused multiple times due to unclear terminology or missing concepts. So let's start this with some clarifications: * The terms "master" or "peer" denote a shared mount. A shared mount belongs to a peer group. * A peer group is a set of shared mounts that propagate to each other. They are identified by a peer group id. The peer group id is available in @shared_mnt->mnt_group_id. Shared mounts within the same peer group have the same peer group id. The peers in a peer group can be reached via @shared_mnt->mnt_share. * The terms "slave mount" or "dependent mount" denote a mount that receives propagation from a peer in a peer group. IOW, shared mounts may have slave mounts and slave mounts have shared mounts as their master. Slave mounts of a given peer in a peer group are listed on that peers slave list available at @shared_mnt->mnt_slave_list. * The term "master mount" denotes a mount in a peer group. IOW, it denotes a shared mount or a peer mount in a peer group. The term "master mount" - or "master" for short - is mostly used when talking in the context of slave mounts that receive propagation from a master mount. A master mount of a slave identifies the closest peer group a slave mount receives propagation from. The master mount of a slave can be identified via @slave_mount->mnt_master. Different slaves may point to different masters in the same peer group. * Multiple peers in a peer group can have non-empty ->mnt_slave_lists. Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to ensure all slave mounts of a peer group are visited the ->mnt_slave_lists of all peers in a peer group have to be walked. * Slave mounts point to a peer in the closest peer group they receive propagation from via @slave_mnt->mnt_master (see above). Together with these peers they form a propagation group (see below). The closest peer group can thus be identified through the peer group id @slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave mount receives propagation from. * A shared-slave mount is a slave mount to a peer group pg1 while also a peer in another peer group pg2. IOW, a peer group may receive propagation from another peer group. If a peer group pg1 is a slave to another peer group pg2 then all peers in peer group pg1 point to the same peer in peer group pg2 via ->mnt_master. IOW, all peers in peer group pg1 appear on the same ->mnt_slave_list. IOW, they cannot be slaves to different peer groups. * A pure slave mount is a slave mount that is a slave to a peer group but is not a peer in another peer group. * A propagation group denotes the set of mounts consisting of a single peer group pg1 and all slave mounts and shared-slave mounts that point to a peer in that peer group via ->mnt_master. IOW, all slave mounts such that @slave_mnt->mnt_master->mnt_group_id is equal to @shared_mnt->mnt_group_id. The concept of a propagation group makes it easier to talk about a single propagation level in a propagation tree. For example, in propagate_mnt() the immediate peers of @dest_mnt and all slaves of @dest_mnt's peer group form a propagation group pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/mce: use is_copy_from_user() to determine copy-from-user context Patch series "mm/hwpoison: Fix regressions in memory failure handling", v4. ## 1. What am I trying to do: This patchset resolves two critical regressions related to memory failure handling that have appeared in the upstream kernel since version 5.17, as compared to 5.10 LTS. - copyin case: poison found in user page while kernel copying from user space - instr case: poison found while instruction fetching in user space ## 2. What is the expected outcome and why - For copyin case: Kernel can recover from poison found where kernel is doing get_user() or copy_from_user() if those places get an error return and the kernel return -EFAULT to the process instead of crashing. More specifily, MCE handler checks the fixup handler type to decide whether an in kernel #MC can be recovered. When EX_TYPE_UACCESS is found, the PC jumps to recovery code specified in _ASM_EXTABLE_FAULT() and return a -EFAULT to user space. - For instr case: If a poison found while instruction fetching in user space, full recovery is possible. User process takes #PF, Linux allocates a new page and fills by reading from storage. ## 3. What actually happens and why - For copyin case: kernel panic since v5.17 Commit 4c132d1d844a ("x86/futex: Remove .fixup usage") introduced a new extable fixup type, EX_TYPE_EFAULT_REG, and later patches updated the extable fixup type for copy-from-user operations, changing it from EX_TYPE_UACCESS to EX_TYPE_EFAULT_REG. It breaks previous EX_TYPE_UACCESS handling when posion found in get_user() or copy_from_user(). - For instr case: user process is killed by a SIGBUS signal due to #CMCI and #MCE race When an uncorrected memory error is consumed there is a race between the CMCI from the memory controller reporting an uncorrected error with a UCNA signature, and the core reporting and SRAR signature machine check when the data is about to be consumed. ### Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1] Prior to Icelake memory controllers reported patrol scrub events that detected a previously unseen uncorrected error in memory by signaling a broadcast machine check with an SRAO (Software Recoverable Action Optional) signature in the machine check bank. This was overkill because it's not an urgent problem that no core is on the verge of consuming that bad data. It's also found that multi SRAO UCE may cause nested MCE interrupts and finally become an IERR. Hence, Intel downgrades the machine check bank signature of patrol scrub from SRAO to UCNA (Uncorrected, No Action required), and signal changed to #CMCI. Just to add to the confusion, Linux does take an action (in uc_decode_notifier()) to try to offline the page despite the UC*NA* signature name. ### Background: why #CMCI and #MCE race when poison is consuming in Intel platform [1] Having decided that CMCI/UCNA is the best action for patrol scrub errors, the memory controller uses it for reads too. But the memory controller is executing asynchronously from the core, and can't tell the difference between a "real" read and a speculative read. So it will do CMCI/UCNA if an error is found in any read. Thus: 1) Core is clever and thinks address A is needed soon, issues a speculative read. 2) Core finds it is going to use address A soon after sending the read request 3) The CMCI from the memory controller is in a race with MCE from the core that will soon try to retire the load from address A. Quite often (because speculation has got better) the CMCI from the memory controller is delivered before the core is committed to the instruction reading address A, so the interrupt is taken, and Linux offlines the page (marking it as poison). ## Why user process is killed for instr case Commit 046545a661af ("mm/hwpoison: fix error page recovered but reported "not ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/

In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error The function move_dirty_folio_in_page_array() was created by commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by moving code from ceph_writepages_start() to this function. This new function is supposed to return an error code which is checked by the caller (now ceph_process_folio_batch()), and on error, the caller invokes redirty_page_for_writepage() and then breaks from the loop. However, the refactoring commit has gone wrong, and it by accident, it always returns 0 (= success) because it first NULLs the pointer and then returns PTR_ERR(NULL) which is always 0. This means errors are silently ignored, leaving NULL entries in the page array, which may later crash the kernel. The simple solution is to call PTR_ERR() before clearing the pointer.

In the Linux kernel, the following vulnerability has been resolved: of_numa: fix uninitialized memory nodes causing kernel panic When there are memory-only nodes (nodes without CPUs), these nodes are not properly initialized, causing kernel panic during boot. of_numa_init of_numa_parse_cpu_nodes node_set(nid, numa_nodes_parsed); of_numa_parse_memory_nodes In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes containing CPUs. Memory-only nodes should have been updated in of_numa_parse_memory_nodes, but they weren't. Subsequently, when free_area_init() attempts to access NODE_DATA() for these uninitialized memory nodes, the kernel panics due to NULL pointer dereference. This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes: qemu-system-aarch64 \ -cpu host -nographic \ -m 4G -smp 1 \ -machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \ -object memory-backend-ram,size=2G,id=mem0 \ -object memory-backend-ram,size=2G,id=mem1 \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -kernel $IMAGE \ -hda $DISK \ -append "console=ttyAMA0 root=/dev/vda rw earlycon" [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010] [ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff] [ 0.000000] node 1 must be removed before remove section 23 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x0000000096000004 [ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] FSC = 0x04: level 0 translation fault [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.000000] [00000000000000a0] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : free_area_init+0x50c/0xf9c [ 0.000000] lr : free_area_init+0x5c0/0xf9c [ 0.000000] sp : ffffa02ca0f33c00 [ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000 [ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000 [ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368 [ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002 [ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001 [ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002 [ 0.0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: smb: client: let recv_done verify data_offset, data_length and remaining_data_length This is inspired by the related server fixes.

In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix lockdep assertion on sync reset unload event Fix lockdep assertion triggered during sync reset unload event. When the sync reset flow is initiated using the devlink reload fw_activate option, the PF already holds the devlink lock while handling unload event. In this case, delegate sync reset unload event handling back to the devlink callback process to avoid double-locking and resolve the lockdep warning. Kernel log: WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40 [...] Call Trace: <TASK> mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core] mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core] process_one_work+0x222/0x640 worker_thread+0x199/0x350 kthread+0x10b/0x230 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x8e/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_alloc_spi shouldn't use 0 as SPI x->id.spi == 0 means "no SPI assigned", but since commit 94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states and add them to the byspi list with this value. __xfrm_state_delete doesn't remove those states from the byspi list, since they shouldn't be there, and this shows up as a UAF the next time we go through the byspi list.

In the Linux kernel, the following vulnerability has been resolved: USB: chipidea: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: unregister ECC engine on probe error and device remove The on-host hardware ECC engine remains registered both when the spi_register_controller() function returns with an error and also on device removal. Change the qcom_spi_probe() function to unregister the engine on the error path, and add the missing unregistering call to qcom_spi_remove() to avoid possible use-after-free issues.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL pointer dereference in UTF16 conversion There can be a NULL pointer dereference bug here. NULL is passed to __cifs_sfu_make_node without checks, which passes it unchecked to cifs_strndup_to_utf16, which in turn passes it to cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash. This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and returns NULL early to prevent dereferencing NULL pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failed If earlier opening of source graph fails (e.g. ADSP rejects due to incorrect audioreach topology), the graph is closed and "dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink graph continues though and next call to q6apm_lpass_dai_prepare() receives dai_data->graph[dai->id]=NULL leading to NULL pointer exception: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 ... Call trace: q6apm_graph_media_format_pcm+0x48/0x120 (P) q6apm_lpass_dai_prepare+0x110/0x1b4 snd_soc_pcm_dai_prepare+0x74/0x108 __soc_pcm_prepare+0x44/0x160 dpcm_be_dai_prepare+0x124/0x1c0

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix wrong ct->timeout value (struct nf_conn)->timeout is an interval before the conntrack confirmed. After confirmed, it becomes a timestamp. It is observed that timeout of an unconfirmed conntrack: - Set by calling ctnetlink_change_timeout(). As a result, `nfct_time_stamp` was wrongly added to `ct->timeout` twice. - Get by calling ctnetlink_dump_timeout(). As a result, `nfct_time_stamp` was wrongly subtracted. Call Trace: <TASK> dump_stack_lvl ctnetlink_dump_timeout __ctnetlink_glue_build ctnetlink_glue_build __nfqnl_enqueue_packet nf_queue nf_hook_slow ip_mc_output ? __pfx_ip_finish_output ip_send_skb ? __pfx_dst_output udp_send_skb udp_sendmsg ? __pfx_ip_generic_getfrag sock_sendmsg Separate the 2 cases in: - Setting `ct->timeout` in __nf_ct_set_timeout(). - Getting `ct->timeout` in ctnetlink_dump_timeout(). Pablo appends: Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is set on, otherwise conntrack creation via ctnetlink breaks. Note that the problem described in this patch occurs since the introduction of the nfnetlink_queue conntrack support, select a sufficiently old Fixes: tag for -stable kernel to pick up this fix.

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region() In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed.

In the Linux kernel, the following vulnerability has been resolved: tls: make sure to abort the stream if headers are bogus Normally we wait for the socket to buffer up the whole record before we service it. If the socket has a tiny buffer, however, we read out the data sooner, to prevent connection stalls. Make sure that we abort the connection when we find out late that the record is actually invalid. Retrying the parsing is fine in itself but since we copy some more data each time before we parse we can overflow the allocated skb space. Constructing a scenario in which we're under pressure without enough data in the socket to parse the length upfront is quite hard. syzbot figured out a way to do this by serving us the header in small OOB sends, and then filling in the recvbuf with a large normal send. Make sure that tls_rx_msg_size() aborts strp, if we reach an invalid record there's really no way to recover.

In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]

In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.

In the Linux kernel, the following vulnerability has been resolved: ax25: properly unshare skbs in ax25_kiss_rcv() Bernard Pidoux reported a regression apparently caused by commit c353e8983e0d ("net: introduce per netns packet chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without a major crash. But the root cause is that ax25_kiss_rcv() can queue/mangle input skb without checking if this skb is shared or not. Many thanks to Bernard Pidoux for his help, diagnosis and tests. We had a similar issue years ago fixed with commit 7aaed57c5c28 ("phonet: properly unshare skbs in phonet_rcv()").

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: ensure data length is within supported range Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour. This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16. Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to: (len - 1) & 0xf and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes. For completeness, also add a quirk for the zero length. [1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2

A security vulnerability in the Spectrum Scale 5.0 and 5.1 allows a non-root user to overflow the mmfsd daemon with requests and preventing the daemon to service other requests. IBM X-Force ID: 191599.

In the Linux kernel, the following vulnerability has been resolved: eth: mlx4: Fix IS_ERR() vs NULL check bug in mlx4_en_create_rx_ring Replace NULL check with IS_ERR() check after calling page_pool_create() since this function returns error pointers (ERR_PTR). Using NULL check could lead to invalid pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using kmap_local_page(), which requires unmapping in Last-In-First-Out order. The current code maps dst_pte first, then src_pte, but unmaps them in the same order (dst_pte, src_pte), violating the LIFO requirement. This causes the warning in kunmap_local_indexed(): WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx) Fix this by reversing the unmap order to respect LIFO ordering. This issue follows the same pattern as similar fixes: - commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order") - commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename") Both of which addressed the same fundamental requirement that kmap_local operations must follow LIFO ordering.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Check encryption key size on incoming connection This is required for passing GAP/SEC/SEM/BI-04-C PTS test case: Security Mode 4 Level 4, Responder - Invalid Encryption Key Size - 128 bit This tests the security key with size from 1 to 15 bytes while the Security Mode 4 Level 4 requests 16 bytes key size. Currently PTS fails with the following logs: - expected:Connection Response: Code: [3 (0x03)] Code Identifier: (lt)WildCard: Exists(gt) Length: [8 (0x0008)] Destination CID: (lt)WildCard: Exists(gt) Source CID: [64 (0x0040)] Result: [3 (0x0003)] Connection refused - Security block Status: (lt)WildCard: Exists(gt), but received:Connection Response: Code: [3 (0x03)] Code Identifier: [1 (0x01)] Length: [8 (0x0008)] Destination CID: [64 (0x0040)] Source CID: [64 (0x0040)] Result: [0 (0x0000)] Connection Successful Status: [0 (0x0000)] No further information available And HCI logs: < HCI Command: Read Encrypti.. (0x05|0x0008) plen 2 Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) Key size: 7 > ACL Data RX: Handle 14 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 1 len 4 PSM: 4097 (0x1001) Source CID: 64 < ACL Data TX: Handle 14 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 1 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000)

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation.

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus_core) Fix NULL pointer dereference Pass i2c_client to _pmbus_is_enabled to drop the assumption that a regulator device is passed in. This will fix the issue of a NULL pointer dereference when called from _pmbus_get_flags.

In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback In commit 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem operation frequency switches") the logic for checking the viability of op->max_freq in mchp_coreqspi_setup_clock() was copied into mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid when this function is called during probe but is instead zero. Accordingly, baud_rate_val is calculated to be INT_MAX due to division by zero, causing probe of the attached memory device to fail. Seemingly spi-microchip-core-qspi was the only driver that had such a modification made to its supports_op callback when the per_op_freq capability was added, so just remove it to restore prior functionality.

In the Linux kernel, the following vulnerability has been resolved: x86/vmscape: Add conditional IBPB mitigation VMSCAPE is a vulnerability that exploits insufficient branch predictor isolation between a guest and a userspace hypervisor (like QEMU). Existing mitigations already protect kernel/KVM from a malicious guest. Userspace can additionally be protected by flushing the branch predictors after a VMexit. Since it is the userspace that consumes the poisoned branch predictors, conditionally issue an IBPB after a VMexit and before returning to userspace. Workloads that frequently switch between hypervisor and userspace will incur the most overhead from the new IBPB. This new IBPB is not integrated with the existing IBPB sites. For instance, a task can use the existing speculation control prctl() to get an IBPB at context switch time. With this implementation, the IBPB is doubled up: one at context switch and another before running userspace. The intent is to integrate and optimize these cases post-embargo. [ dhansen: elaborate on suboptimal IBPB solution ]

In the Linux kernel, the following vulnerability has been resolved: nfs/localio: restore creds before releasing pageio data Otherwise if the nfsd filecache code releases the nfsd_file immediately, it can trigger the BUG_ON(cred == current->cred) in __put_cred() when it puts the nfsd_file->nf_file->f-cred.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: efi: fix potential NULL deref in efi_mem_reserve_persistent When iterating on a linked list, a result of memremap is dereferenced without checking it for NULL. This patch adds a check that falls back on allocating a new page in case memremap doesn't succeed. Found by Linux Verification Center (linuxtesting.org) with SVACE. [ardb: return -ENOMEM instead of breaking out of the loop]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size This is inspired by the check for data_offset + data_length.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent If the controller is not marked as cache coherent, then kernel will try to ensure coherency during dma-ops and that may cause data corruption. So, mark the PCIe node as dma-coherent as the devices on PCIe bus are cache coherent.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix invalid algorithm for encoded extents The current algorithm sanity checks do not properly apply to new encoded extents. Unify the algorithm check with Z_EROFS_COMPRESSION(_RUNTIME)_MAX and ensure consistency with sbi->available_compr_algs.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow When an invalid stc_type is provided, the function allocates memory for shared_stc but jumps to unlock_and_out without freeing it, causing a memory leak. Fix by jumping to free_shared_stc label instead to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: remove oem i2c adapter on finish Fixes a bug where unbinding of the GPU would leave the oem i2c adapter registered resulting in a null pointer dereference when applications try to access the invalid device. (cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6)

In the Linux kernel, the following vulnerability has been resolved: net: dev_ioctl: take ops lock in hwtstamp lower paths ndo hwtstamp callbacks are expected to run under the per-device ops lock. Make the lower get/set paths consistent with the rest of ndo invocations. Kernel log: WARNING: CPU: 13 PID: 51364 at ./include/net/netdev_lock.h:70 __netdev_update_features+0x4bd/0xe60 ... RIP: 0010:__netdev_update_features+0x4bd/0xe60 ... Call Trace: <TASK> netdev_update_features+0x1f/0x60 mlx5_hwtstamp_set+0x181/0x290 [mlx5_core] mlx5e_hwtstamp_set+0x19/0x30 [mlx5_core] dev_set_hwtstamp_phylib+0x9f/0x220 dev_set_hwtstamp_phylib+0x9f/0x220 dev_set_hwtstamp+0x13d/0x240 dev_ioctl+0x12f/0x4b0 sock_ioctl+0x171/0x370 __x64_sys_ioctl+0x3f7/0x900 ? __sys_setsockopt+0x69/0xb0 do_syscall_64+0x6f/0x2e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... </TASK> .... ---[ end trace 0000000000000000 ]--- Note that the mlx5_hwtstamp_set and mlx5e_hwtstamp_set functions shown in the trace come from an in progress patch converting the legacy ioctl to ndo_hwtstamp_get/set and are not present in mainline.

In the Linux kernel, the following vulnerability has been resolved: arm64: acpi: Fix possible memory leak of ffh_ctxt Allocated 'ffh_ctxt' memory leak is possible if the SMCCC version and conduit checks fail and -EOPNOTSUPP is returned without freeing the allocated memory. Fix the same by moving the allocation after the SMCCC version and conduit checks.