A vulnerability regarding improper neutralization of special elements used in an OS command ('OS Command Injection') is found in the NTP configuration. This allows remote authenticated users with administrator privileges to execute arbitrary commands via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.
A post-authentication command injection vulnerability in the TR-369 certificate download CGI program of the Zyxel VMG3625-T50B firmware versions through 5.50(ABPM.9.7)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on an affected device.
OS command injection vulnerability exists in Wi-Fi AP UNIT allows. If this vulnerability is exploited, a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. Affected products and versions are as follows: AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPUM-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B07 and earlier
Some Hikvision Wireless Access Points are vulnerable to authenticated command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.
A vulnerability was detected in D-Link DIR-615 up to 4.10. This impacts an unknown function of the file /wiz_policy_3_machine.php of the component Web Management Interface. Performing a manipulation of the argument ipaddr results in os command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A privilege escalation vulnerability was discovered in XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.
A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function systemCommand of the file /goform/systemCommand. Executing manipulation of the argument command can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A privilege escalation vulnerability was discovered in the SSH captive command shell interface that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.
A security vulnerability has been detected in D-Link DI-500WF 14.04.10A1T. The impacted element is an unknown function of the file /version_upgrade.asp of the component jhttpd. The manipulation of the argument path leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).
A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).
MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.
A command injection vulnerability may be exploited after the admin's authentication on the web portal on Omada gateways.
ThreatSonar Anti-Ransomware developed by TeamT5 has an OS Command Injection vulnerability, allowing remote attackers with product platform intermediate privileges to inject arbitrary OS commands and execute them on the server, thereby gaining administrative access to the remote host.
When DNS is provisioned, an authenticated remote command execution vulnerability exists in DNS iQuery mesh. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Diagnostics command injection vulnerability
Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.
An instance of improper neutralization of special elements in the sniffer module of FortiSandbox before 3.2.2 may allow an authenticated administrator to execute commands on the underlying system's shell via altering the content of its configuration file.
RG - AP180, Indoor Wall Plate Wireless AP AP180 series provided by Ruijie Networks Co., Ltd. contain an OS command injection vulnerability. An arbitrary OS command may be executed on the product by an attacker who logs in to the CLI service.
Wi-Fi AP UNIT AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B08P and earlier, AC-WAPUM-300 v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B08P and earlier allow an authenticated user with an administrative privilege to execute an arbitrary OS command.
A vulnerability has been found in Ruijie RG-UAC up to 20240428 and classified as critical. This vulnerability affects unknown code of the file /view/IPV6/ipv6Addr/ip_addr_edit_commit.php. The manipulation of the argument text_ip_addr/orgprelen/orgname leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263110 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
RiteCMS v3.1.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the parse_special_tags() function.
An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
Array Networks ArrayOS AG before 9.4.5.9 allows command injection, as exploited in the wild in August through December 2025.
ChurchCRM is an open-source church management system. In versions prior to 6.5.3, the Database Restore functionality does not validate the content or file extension of uploaded files. As a result, an attacker can upload a web shell file and subsequently upload a .htaccess file to enable direct access to it. Once accessed, the uploaded web shell allows remote code execution (RCE) on the server. Version 6.5.3 fixes the issue.
A code execution vulnerability exists in the Libcli Test Environment functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.
A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.
A vulnerability was determined in D-Link DIR-823X 250416. Affected by this issue is the function sub_424D20 of the file /goform/set_ipv6. Executing a manipulation can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.
Vivotek IP7137 camera with firmware version 0200a is vulnerable to command injection. Parameter "system_ntpIt" used by "/cgi-bin/admin/setparam.cgi" endpoint is not sanitized properly, allowing a user with administrative privileges to perform an attack. Due to CVE-2025-66050, administrative access is not protected by default, The vendor has not replied to the CNA Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.
A vulnerability was determined in D-Link DIR-615 4.10. Impacted is an unknown function of the file /adv_mac_filter.php of the component MAC Filter Configuration. This manipulation of the argument mac causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
Dell OpenManage Enterprise versions prior to 3.6.1 contain an OS command injection vulnerability in RACADM and IPMI tools. A remote authenticated malicious user with high privileges may potentially exploit this vulnerability to execute arbitrary OS commands.
An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTScloud c5.1.0.2498 and later
MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.
FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions 17.0.2.36 and above before 17.0.3, the filestore module within the Administrative interface is vulnerable to a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to obtain remote access to the system as an asterisk user. This issue is fixed in version 17.0.3.
An OS command injection vulnerability exists in the ys_thirdparty check_system_user functionality of Milesight UR32L v32.3.0.5. A specially crafted set of network packets can lead to command execution. An attacker can send a network request to trigger this vulnerability.
The function "generate_app_certificates" in lib/app_certificates.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious name.
vSphere Replication 8.3.x prior to 8.3.1.2, 8.2.x prior to 8.2.1.1, 8.1.x prior to 8.1.2.3 and 6.5.x prior to 6.5.1.5 contain a post-authentication command injection vulnerability which may allow an authenticated admin user to perform a remote code execution.
The email search interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.
A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiExtender 7.6.0 through 7.6.3, FortiExtender 7.4.0 through 7.4.7, FortiExtender 7.2 all versions, FortiExtender 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via a specific HTTP request.
GoSecure on behalf of Genetec Inc. has found a flaw that allows for a remote code execution during the installation of ACAP applications on the Axis device. The application handling service in AXIS OS was vulnerable to command injection allowing an attacker to run arbitrary code. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution.
User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.
A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V5.00 through V5.38, USG FLEX series firmware versions from V5.00 through V5.38, USG FLEX 50(W) series firmware versions from V5.00 through V5.38, and USG20(W)-VPN series firmware versions from V5.00 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted compressed language file via FTP.
A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the input parameters in specific GET requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.
User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.
A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.