An uncontrolled resource consumption (memory leak) flaw was found in ZeroMQ's src/xpub.cpp in versions before 4.3.3. This flaw allows a remote unauthenticated attacker to send crafted PUB messages that consume excessive memory if the CURVE/ZAP authentication is disabled on the server, causing a denial of service. The highest threat from this vulnerability is to system availability.

In Splunk Enterprise versions below 8.2.9, 8.1.12, and 9.0.2, sending a malformed file through the Splunk-to-Splunk (S2S) or HTTP Event Collector (HEC) protocols to an indexer results in a blockage or denial-of-service preventing further indexing.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

A vulnerability in the system resource management of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) to the health monitor API on an affected device. The vulnerability is due to inadequate provisioning of kernel parameters for the maximum number of TCP connections and SYN backlog. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to block TCP listening ports that are used by the health monitor API. This vulnerability only affects customers who use the health monitor API.

In Pure-FTPd 1.0.49, a stack exhaustion issue was discovered in the listdir function in ls.c.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

stratisX through 2.0.0.5 (a chain-based proof-of-stake cryptocurrency) allows a remote denial of service, exploitable by an attacker who acquires even a small amount of stake/coins in the system. The attacker sends invalid headers/blocks, which are stored on the victim's disk.

Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.8, there is a potential vulnerability in Traefik managing STARTTLS requests. An unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely, leading to a denial of service. This vulnerability is fixed in 3.6.8.

TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. Versions prior to version 2.02 are vulnerable to a Denial of Service (DoS) attack known as Slowloris. The server spawns a new OS thread for every incoming connection without enforcing a maximum concurrency limit or an appropriate request timeout. An unauthenticated remote attacker can exhaust server concurrency limits and memory by opening numerous connections and sending data exceptionally slowly (e.g. 1 byte every few minutes). Anyone hosting services using TinyWeb is impacted. Version 2.02 fixes the issue. The patch introduces a `CMaxConnections` limit (set to 512) and a `CConnectionTimeoutSecs` idle timeout (set to 30 seconds). As a temporary workaround if upgrading is not immediately possible, consider placing the server behind a robust reverse proxy or Web Application Firewall (WAF) such as nginx, HAProxy, or Cloudflare, configured to buffer incomplete requests and aggressively enforce connection limits and timeouts.

Windows Kerberos Denial of Service Vulnerability

TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. Versions prior to version 2.02 have a Denial of Service (DoS) vulnerability via memory exhaustion. Unauthenticated remote attackers can send an HTTP POST request to the server with an exceptionally large `Content-Length` header (e.g., `2147483647`). The server continuously allocates memory for the request body (`EntityBody`) while streaming the payload without enforcing any maximum limit, leading to all available memory being consumed and causing the server to crash. Anyone hosting services using TinyWeb is impacted. Version 2.02 fixes the issue. The patch introduces a `CMaxEntityBodySize` limit (set to 10MB) for the maximum size of accepted payloads. As a temporary workaround if upgrading is not immediately possible, consider placing the server behind a Web Application Firewall (WAF) or reverse proxy (like nginx or Cloudflare) configured to explicitly limit the maximum allowed HTTP request body size (e.g., `client_max_body_size` in nginx).

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted profile contain invalid IPTC data may cause an infinite loop when writing it with `IPTCTEXT`. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

A vulnerability has been identified in Development/Evaluation Kits for PROFINET IO: EK-ERTEC 200, Development/Evaluation Kits for PROFINET IO: EK-ERTEC 200P, KTK ATE530S, SIDOOR ATD430W, SIDOOR ATE530S COATED, SIDOOR ATE531S, SIMATIC ET 200AL IM 157-1 PN (6ES7157-1AB00-0AB0), SIMATIC ET 200eco PN, AI 8xRTD/TC, M12-L (6ES7144-6JF00-0BB0), SIMATIC ET 200eco PN, CM 4x IO-Link, M12-L (6ES7148-6JE00-0BB0), SIMATIC ET 200eco PN, CM 8x IO-Link, M12-L (6ES7148-6JG00-0BB0), SIMATIC ET 200eco PN, CM 8x IO-Link, M12-L (6ES7148-6JJ00-0BB0), SIMATIC ET 200eco PN, DI 16x24VDC, M12-L (6ES7141-6BH00-0BB0), SIMATIC ET 200eco PN, DI 8x24VDC, M12-L (6ES7141-6BG00-0BB0), SIMATIC ET 200eco PN, DIQ 16x24VDC/2A, M12-L (6ES7143-6BH00-0BB0), SIMATIC ET 200eco PN, DQ 8x24VDC/0,5A, M12-L (6ES7142-6BG00-0BB0), SIMATIC ET 200eco PN, DQ 8x24VDC/2A, M12-L (6ES7142-6BR00-0BB0), SIMATIC ET 200MP IM 155-5 PN HF (6ES7155-5AA00-0AC0), SIMATIC ET 200pro IM 154-8 PN/DP CPU (6ES7154-8AB01-0AB0), SIMATIC ET 200pro IM 154-8F PN/DP CPU (6ES7154-8FB01-0AB0), SIMATIC ET 200pro IM 154-8FX PN/DP CPU (6ES7154-8FX00-0AB0), SIMATIC ET 200S IM 151-8 PN/DP CPU (6ES7151-8AB01-0AB0), SIMATIC ET 200S IM 151-8F PN/DP CPU (6ES7151-8FB01-0AB0), SIMATIC ET 200SP IM 155-6 MF HF (6ES7155-6MU00-0CN0), SIMATIC ET 200SP IM 155-6 PN HA (incl. SIPLUS variants), SIMATIC ET 200SP IM 155-6 PN HF (6ES7155-6AU00-0CN0), SIMATIC ET 200SP IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0), SIMATIC ET 200SP IM 155-6 PN/3 HF (6ES7155-6AU30-0CN0), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants), SIMATIC MICRO-DRIVE PDC, SIMATIC PN/MF Coupler (6ES7158-3MU10-0XA0), SIMATIC PN/PN Coupler (6ES7158-3AD10-0XA0), SIMATIC S7-1200 CPU family (incl. SIPLUS variants), SIMATIC S7-1500 CPU family (incl. related ET 200 CPUs and SIPLUS variants), SIMATIC S7-1500 Software Controller, SIMATIC S7-300 CPU 314C-2 PN/DP (6ES7314-6EH04-0AB0), SIMATIC S7-300 CPU 315-2 PN/DP (6ES7315-2EH14-0AB0), SIMATIC S7-300 CPU 315F-2 PN/DP (6ES7315-2FJ14-0AB0), SIMATIC S7-300 CPU 315T-3 PN/DP (6ES7315-7TJ10-0AB0), SIMATIC S7-300 CPU 317-2 PN/DP (6ES7317-2EK14-0AB0), SIMATIC S7-300 CPU 317F-2 PN/DP (6ES7317-2FK14-0AB0), SIMATIC S7-300 CPU 317T-3 PN/DP (6ES7317-7TK10-0AB0), SIMATIC S7-300 CPU 317TF-3 PN/DP (6ES7317-7UL10-0AB0), SIMATIC S7-300 CPU 319-3 PN/DP (6ES7318-3EL01-0AB0), SIMATIC S7-300 CPU 319F-3 PN/DP (6ES7318-3FL01-0AB0), SIMATIC S7-400 H V6 and below CPU family (incl. SIPLUS variants), SIMATIC S7-400 PN/DP V7 CPU family (incl. SIPLUS variants), SIMATIC S7-410 V10 CPU family (incl. SIPLUS variants), SIMATIC S7-410 V8 CPU family (incl. SIPLUS variants), SIMATIC TDC CP51M1, SIMATIC TDC CPU555, SIMATIC WinAC RTX 2010 (6ES7671-0RC08-0YA0), SIMATIC WinAC RTX F 2010 (6ES7671-1RC08-0YA0), SINAMICS S/G Control Unit w. PROFINET, SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-2AC0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-7AC0), SIPLUS ET 200MP IM 155-5 PN HF T1 RAIL (6AG2155-5AA00-1AC0), SIPLUS ET 200S IM 151-8 PN/DP CPU (6AG1151-8AB01-7AB0), SIPLUS ET 200S IM 151-8F PN/DP CPU (6AG1151-8FB01-2AB0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU00-2CN0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU00-4CN0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-2CN0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-7CN0), SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL (6AG2155-6AU00-1CN0), SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL (6AG2155-6AU01-1CN0), SIPLUS ET 200SP IM 155-6 PN HF TX RAIL (6AG2155-6AU01-4CN0), SIPLUS NET PN/PN Coupler (6AG2158-3AD10-4XA0), SIPLUS S7-300 CPU 314C-2 PN/DP (6AG1314-6EH04-7AB0), SIPLUS S7-300 CPU 315-2 PN/DP (6AG1315-2EH14-7AB0), SIPLUS S7-300 CPU 315F-2 PN/DP (6AG1315-2FJ14-2AB0), SIPLUS S7-300 CPU 317-2 PN/DP (6AG1317-2EK14-7AB0), SIPLUS S7-300 CPU 317F-2 PN/DP (6AG1317-2FK14-2AB0). The Interniche-based TCP Stack can be forced to make very expensive calls for every incoming packet which can lead to a denial of service.

pypdf is a free and open-source pure-python PDF library. Prior to 6.7.3, an attacker who uses this vulnerability can craft a PDF which leads to the RAM being exhausted. This requires accessing the `xfa` property of a reader or writer and the corresponding stream being compressed using `/FlateDecode`. This has been fixed in pypdf 6.7.3. As a workaround, apply the patch manually.

go-git is a highly extensible git implementation library written in pure Go. A denial of service (DoS) vulnerability was discovered in go-git versions prior to v5.13. This vulnerability allows an attacker to perform denial of service attacks by providing specially crafted responses from a Git server which triggers resource exhaustion in go-git clients. Users running versions of go-git from v4 and above are recommended to upgrade to v5.13 in order to mitigate this vulnerability.

An uncontrolled resource consumption vulnerability in Juniper Networks Junos OS on QFX5000 Series and EX4600 Series switches allows an attacker sending large amounts of legitimate traffic destined to the device to cause Interchassis Control Protocol (ICCP) interruptions, leading to an unstable control connection between the Multi-Chassis Link Aggregation Group (MC-LAG) nodes which can in turn lead to traffic loss. Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. An indication that the system could be impacted by this issue is the following log message: "DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol/exception LOCALNH:aggregate exceeded its allowed bandwidth at fpc <fpc number> for <n> times, started at <timestamp>" This issue affects Juniper Networks Junos OS on QFX5000 Series and EX4600 Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2.

Memory leak in the OBJ_obj2txt function in LibreSSL before 2.3.1 allows remote attackers to cause a denial of service (memory consumption) via a large number of ASN.1 object identifiers in X.509 certificates.

Shescape is a shell escape package for JavaScript. An Inefficient Regular Expression Complexity vulnerability impacts users that use Shescape to escape arguments for the Unix shells `Bash` and `Dash`, or any not-officially-supported Unix shell; and/or using the `escape` or `escapeAll` functions with the `interpolation` option set to `true`. An attacker can cause polynomial backtracking or quadratic runtime in terms of the input string length due to two Regular Expressions in Shescape that are vulnerable to Regular Expression Denial of Service (ReDoS). This bug has been patched in v1.5.10. For `Dash` only, this bug has been patched since v1.5.9. As a workaround, a maximum length can be enforced on input strings to Shescape to reduce the impact of the vulnerability. It is not recommended to try and detect vulnerable input strings, as the logic for this may end up being vulnerable to ReDoS itself.

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: OpenSearch). Supported versions that are affected are 8.60 and 8.61. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

Windows Remote Desktop Services Denial of Service Vulnerability

An Uncontrolled Resource Consumption vulnerability in Fortinet FortiSwitch below 3.6.11, 6.0.6 and 6.2.2, FortiAnalyzer below 6.2.3, FortiManager below 6.2.3 and FortiAP-S/W2 below 6.2.2 may allow an attacker to cause admin webUI denial of service (DoS) via handling special crafted HTTP requests/responses in pieces slowly, as demonstrated by Slow HTTP DoS Attacks.

A vulnerability in Juniper Networks Junos OS ACX500 Series, ACX4000 Series, may allow an attacker to cause a Denial of Service (DoS) by sending a high rate of specific packets to the device, resulting in a Forwarding Engine Board (FFEB) crash. Continued receipt of these packets will sustain the Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on ACX500 Series, ACX4000 Series: 17.4 versions prior to 17.4R3-S2.

The Moped::BSON::ObjecId.legal? method in mongodb/bson-ruby before 3.0.4 as used in rubygem-moped allows remote attackers to cause a denial of service (worker resource consumption) via a crafted string. NOTE: This issue is due to an incomplete fix to CVE-2015-4410.

AdonisJS is a TypeScript-first web framework. Prior to versions 10.1.3 and 11.0.0-next.9, a denial of service (DoS) vulnerability exists in the multipart file handling logic of @adonisjs/bodyparser. When processing file uploads, the multipart parser may accumulate an unbounded amount of data in memory while attempting to detect file types, potentially leading to excessive memory consumption and process termination. This issue has been patched in versions 10.1.3 and 11.0.0-next.9.

Sliver is a command and control framework that uses a custom Wireguard netstack. Prior to 1.7.0, the DNS C2 listener accepts unauthenticated TOTP bootstrap messages and allocates server-side DNS sessions without validating OTP values, even when EnforceOTP is enabled. Because sessions are stored without a cleanup/expiry path in this flow, an unauthenticated remote actor can repeatedly create sessions and drive memory exhaustion. This vulnerability is fixed in 1.7.0.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). The supported version that is affected is 14.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP/2 to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle WebLogic Server. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests.

An issue was discovered in iPortalis iCS 7.1.13.0. Attackers can send a sequence of requests to rapidly cause .NET Input Validation errors. This increases the size of the log file on the remote server until memory is exhausted, therefore consuming the maximum amount of resources (triggering a denial of service condition).

Windows Active Directory Domain Services API Denial of Service Vulnerability

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Node.js versions 9.7.0 and later and 10.x are vulnerable and the severity is MEDIUM. A bug introduced in 9.7.0 increases the memory consumed when reading from the network into JavaScript using the net.Socket object directly as a stream. An attacker could use this cause a denial of service by sending tiny chunks of data in short succession. This vulnerability was restored by reverting to the prior behaviour.

A Denial-of-Service vulnerability exists in BECKHOFF Ethernet TCP/IP Bus Coupler BK9000. After an attack has occurred, the device's functionality can be restored by rebooting.

The SdpContents::Session::Medium::parse function in resip/stack/SdpContents.cxx in reSIProcate 1.10.2 allows remote attackers to cause a denial of service (memory consumption) by triggering many media connections.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, when a PCD file does not contain a valid Sync marker, the DecodeImage() function becomes trapped in an infinite loop while searching for the Sync marker, causing the program to become unresponsive and continuously consume CPU resources, ultimately leading to system resource exhaustion and denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Philips Hue is vulnerable to a Denial of Service attack. Sending a SYN flood on port tcp/80 will freeze Philips Hue's hub and it will stop responding. The "hub" will stop operating and be frozen until the flood stops. During the flood, the user won't be able to turn on/off the lights, and all of the hub's functionality will be unresponsive. The cloud service also won't work with the hub.

apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, an attacker who controls or compromises an APK repository used by apko could cause resource exhaustion on the build host. The ExpandApk function in pkg/apk/expandapk/expandapk.go expands .apk streams without enforcing decompression limits, allowing a malicious repository to serve a small, highly-compressed .apk that inflates into a large tar stream, consuming excessive disk space and CPU time, causing build failures or denial of service. This issue has been patched in version 1.1.1.

IBM TXSeries for Multiplatforms 8.1, 8.2, and 9.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 262905.

Apache ATS 6.0.0 to 6.2.3, 7.0.0 to 7.1.9, and 8.0.0 to 8.0.6 is vulnerable to a HTTP/2 slow read attack.

jsPDF is a library to generate PDFs in JavaScript. Prior to 4.2.0, user control of the first argument of the `addImage` method results in denial of service. If given the possibility to pass unsanitized image data or URLs to the `addImage` method, a user can provide a harmful GIF file that results in out of memory errors and denial of service. Harmful GIF files have large width and/or height entries in their headers, which lead to excessive memory allocation. Other affected methods are: `html`. The vulnerability has been fixed in jsPDF 4.2.0. As a workaround, sanitize image data or URLs before passing it to the addImage method or one of the other affected methods.

The Snappy frame decoder function doesn't restrict the chunk length which may lead to excessive memory usage. Beside this it also may buffer reserved skippable chunks until the whole chunk was received which may lead to excessive memory usage as well. This vulnerability can be triggered by supplying malicious input that decompresses to a very big size (via a network stream or a file) or by sending a huge skippable chunk.

DHCP Server Service Denial of Service Vulnerability

IBM WebSphere Application Server Liberty 22.0.0.13 through 23.0.0.7 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 262567.

Sympa 6.2.38 through 6.2.52 allows remote attackers to cause a denial of service (disk consumption from temporary files, and a flood of notifications to listmasters) via a series of requests with malformed parameters.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default).