An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A weakness has been identified in UTT HiPER 810G up to 1.7.7-171114. Affected is the function strcpy of the file /goform/formConfigDnsFilterGlobal. This manipulation causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Tenda FH1202 1.2.0.14(408). The affected element is the function formWebTypeLibrary of the file /goform/webtypelibrary. Performing a manipulation of the argument webSiteId results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A security flaw has been discovered in Belkin F9K1015 1.00.10. Impacted is the function formSetPassword of the file /goform/formSetPassword. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in D-Link DIR-645 1.01/1.02/1.03. Impacted is the function hedwigcgi_main of the file /cgi-bin/hedwig.cgi. The manipulation results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in UTT HiPER 810G up to 1.7.7-171114. This affects the function strcpy of the file /goform/NTP. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A vulnerability was found in Tenda FH1202 1.2.0.14(408). This impacts the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument page results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A vulnerability was found in Tenda FH451 1.0.0.9. This impacts the function fromSetCfm of the file /goform/setcfm. The manipulation of the argument funcname/funcpara1 results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

A vulnerability was determined in Tenda F451 1.0.0.7_cn_svn7958. Impacted is the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter of the component httpd. Executing a manipulation of the argument page can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Tenda i3 1.0.0.6(2204). This vulnerability affects the function formWifiMacFilterSet of the file /goform/WifiMacFilterSet. The manipulation of the argument index results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was determined in Tenda F456 1.0.0.5. The affected element is the function formwebtypelibrary of the file /goform/webtypelibrary. This manipulation of the argument menufacturer/Go causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'get' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'get <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A security flaw has been discovered in Tenda F451 1.0.0.7_cn_svn7958. This vulnerability affects the function fromqossetting of the file /goform/qossetting. Performing a manipulation of the argument qos results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in Tenda F456 1.0.0.5. This affects the function fromexeCommand of the file /goform/exeCommand. Performing a manipulation of the argument cmdinput results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A vulnerability was found in Tenda F453 1.0.0.3. This vulnerability affects the function fromSafeClientFilter of the file /goform/SafeClientFilter of the component Parameters Handler. Performing a manipulation of the argument menufacturer/Go results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

IBM Engineering Systems Design Rhapsody 9.0.2, 10.0, and 10.0.1 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system.

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a buffer overflow in the handling of the `INDEX` of `NET-SNMP-VACM-MIB` can cause an out-of-bounds memory access. A user with read-only credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "URL" parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments" and passes a "pointer" to the function where it will be allowed to store the value from the URL parameter. This pointer is passed as the second parameter $a2 to the function "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". However, neither the callee or the caller in this case performs a simple length check and as a result an attacker who is able to send more than 1336 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.

A stack buffer overflow vulnerability has been discovered in Microsoft Skype 7.2, 7.35, and 7.36 before 7.37, involving MSFTEDIT.DLL mishandling of remote RDP clipboard content within the message box.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

A vulnerability was identified in Tenda F453 1.0.0.3. Affected by this vulnerability is the function fromGstDhcpSetSer of the file /goform/GstDhcpSetSer of the component httpd. The manipulation of the argument dips leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

Stack-based buffer overflow in Oracle 9i and 10g allows remote attackers to execute arbitrary code via a long token in the text of a wrapped procedure.

A vulnerability was determined in Tenda F453 1.0.0.3. Affected is the function fromAdvSetWan of the file /goform/AdvSetWan of the component httpd. Executing a manipulation of the argument wanmode/PPPOEPassword can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in Tenda F453 1.0.0.3. This vulnerability affects the function fromSetIpBind of the file /goform/SetIpBind. The manipulation of the argument page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.&nbsp; The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A security flaw has been discovered in Tenda F453 1.0.0.3. Affected by this issue is the function frmL7ProtForm of the file /goform/L7Prot of the component httpd. Performing a manipulation of the argument page results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

A security vulnerability has been detected in Tenda F453 1.0.0.3. Affected by this vulnerability is the function fromSafeMacFilter of the file /goform/SafeMacFilter. Such manipulation of the argument page leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in Tenda FH1201 1.2.0.14(408). Affected is the function formWrlExtraSet of the file /goform/WrlExtraSet of the component Parameter Handler. Executing a manipulation of the argument GO can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been published and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability was determined in Tenda F453 1.0.0.3. Affected is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.&nbsp; The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.&nbsp; The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A weakness has been identified in Tenda F453 1.0.0.3. This affects the function fromAddressNat of the file /goform/addressNat of the component httpd. Executing a manipulation of the argument entrys can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

A vulnerability was found in Tenda F453 1.0.0.3. This issue affects the function frmL7ImForm of the file /goform/L7Im. The manipulation of the argument page results in buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

Buffer overflow in Active Management Technology (AMT) in Intel Manageability Engine Firmware 8.x/9.x/10.x/11.0/11.5/11.6/11.7/11.10/11.20 allows attacker with remote Admin access to the system to execute arbitrary code with AMT execution privilege.

A vulnerability was found in D-Link DIR-513 1.10. This issue affects the function formSetEmail of the file /goform/formSetEmail. Performing a manipulation of the argument curTime results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_adduser_to_session of the file /cgi-bin/account_mgr.cgi. This manipulation of the argument read_list causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function UPnP_AV_Server_Path_Del of the file /cgi-bin/app_mgr.cgi. Executing a manipulation of the argument f_dir can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A flaw has been found in Tenda F453 1.0.0.3. This affects the function fromqossetting of the file /goform/qossetting. Executing a manipulation of the argument qos can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A security vulnerability has been detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file /goform/formConfigDnsFilterGlobal of the component Parameter Handler. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.