An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device allows a user to install applications written in the Lua programming language. Also the interface allows any user to write his/her application in the Lua language. However, this functionality is not protected by authentication and this allows an attacker to run arbitrary Lua code on the device. The POST request is forwarded to LuaUPNP daemon on the device. This binary handles the received Lua code in the function "LU::JobHandler_LuaUPnP::RunLua(LU::JobHandler_LuaUPnP *__hidden this, LU::UPnPActionWrapper *)". The value in the "code" parameter is then passed to the function "LU::LuaInterface::RunCode(char const*)" which actually loads the Lua engine and runs the code.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device firmware file contains a file known as proxy.sh which allows the device to proxy a specific request to and from from another website. This is primarily used as a method of communication between the device and Vera website when the user is logged in to the https://home.getvera.com and allows the device to communicate between the device and website. One of the parameters retrieved by this specific script is "url". This parameter is not sanitized by the script correctly and is passed in a call to "eval" to execute "curl" functionality. This allows an attacker to escape from the executed command and then execute any commands of his/her choice.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device firmware file contains a file known as relay.sh which allows the device to create relay ports and connect the device to Vera servers. This is primarily used as a method of communication between the device and Vera servers so the devices can be communicated with even when the user is not at home. One of the parameters retrieved by this specific script is "remote_host". This parameter is not sanitized by the script correctly and is passed in a call to "eval" to execute another script where remote_host is concatenated to be passed a parameter to the second script. This allows an attacker to escape from the executed command and then execute any commands of his/her choice.

Several Ricoh printers have multiple buffer overflows parsing HTTP parameter settings for SNMP, which allow an attacker to cause a denial of service or code execution via crafted requests to the web server. Affected firmware versions depend on the printer models. One affected configuration is cpe:2.3:o:ricoh:sp_c250dn_firmware:-:*:*:*:*:*:*:* up to (including) 1.06 running on cpe:2.3:o:ricoh:sp_c250dn:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252dn:-:*:*:*:*:*:*:*. Another affected configuration is cpe:2.3:o:ricoh:sp_c250sf_firmware:-:*:*:*:*:*:*:* up to (including) 1.12 running on cpe:2.3:o:ricoh:sp_c250sf:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252sf:-:*:*:*:*:*:*:*.

A vulnerability was found in D-Link DIR-816L 2_06_b09_beta. This vulnerability affects the function scandir_main of the file /portal/__ajax_exporer.sgi. The manipulation of the argument en results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Tenda RX3 16.03.13.11. Affected by this vulnerability is an unknown functionality of the file /goform/openSchedWifi. Performing a manipulation of the argument schedStartTime/schedEndTime results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Tenda TX9 up to 22.03.02.10_multi. Affected is the function sub_42D03C of the file /goform/SetStaticRouteCfg. The manipulation of the argument list results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.

A vulnerability was detected in Tenda AC8 16.03.33.05. Affected is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet of the component httpd. The manipulation of the argument shareSpeed results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used.

Several Ricoh printers have multiple buffer overflows parsing HTTP parameter settings for Wi-Fi, mDNS, POP3, SMTP, and notification alerts, which allow an attacker to cause a denial of service or code execution via crafted requests to the web server. Affected firmware versions depend on the printer models. One affected configuration is cpe:2.3:o:ricoh:sp_c250dn_firmware:-:*:*:*:*:*:*:* up to (including) 1.06 running on cpe:2.3:o:ricoh:sp_c250dn:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252dn:-:*:*:*:*:*:*:*. Another affected configuration is cpe:2.3:o:ricoh:sp_c250sf_firmware:-:*:*:*:*:*:*:* up to (including) 1.12 running on cpe:2.3:o:ricoh:sp_c250sf:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252sf:-:*:*:*:*:*:*:*.

A flaw has been found in Tenda AC8 16.03.33.05. Affected by this vulnerability is an unknown functionality of the file /goform/fast_setting_wifi_set of the component Embedded Httpd Service. This manipulation of the argument timeZone causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A vulnerability was identified in Tenda RX3 16.03.13.11. Affected is an unknown function of the file /goform/fast_setting_wifi_set. Such manipulation of the argument ssid_5g leads to stack-based buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Tenda RX3 16.03.13.11. Impacted is the function fromSetIpMacBind of the file /goform/SetIpMacBind. Such manipulation of the argument list leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda RX3 16.03.13.11. This issue affects the function set_device_name of the file /goform/setBlackRule of the component MAC Filtering Configuration Endpoint. This manipulation of the argument devName/mac causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A vulnerability was determined in Tenda TX9 up to 22.03.02.10_multi. Affected by this vulnerability is the function sub_432580 of the file /goform/fast_setting_wifi_set. This manipulation of the argument ssid causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Tenda TX9 up to 22.03.02.10_multi. Affected by this issue is the function sub_4223E0 of the file /goform/setMacFilterCfg. Such manipulation of the argument deviceList leads to buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Tenda TX3 up to 16.03.13.11_multi. This impacts an unknown function of the file /goform/SetIpMacBind. The manipulation of the argument list leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. Affected by this vulnerability is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

A security flaw has been discovered in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Performing a manipulation of the argument ssid results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in TOTOLINK A3700R 9.1.2u.5822_B20200513. This affects the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. Executing a manipulation of the argument ssid can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. Impacted is the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Performing a manipulation of the argument ssid results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability was identified in Totolink LR350 9.3.5u.6369_B20220309. This affects the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument ssid leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/ConfigExceptQQ. Executing a manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda AC21 16.03.08.16. The affected element is the function fromAdvSetMacMtuWan of the file /goform/AdvSetMacMtuWan. The manipulation leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this vulnerability is the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Totolink LR350 9.3.5u.6369_B20220309. Affected by this issue is the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/ConfigExceptMSN. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Tenda AC23 16.03.07.52. This impacts an unknown function of the file /goform/WifiExtraSet. This manipulation of the argument wpapsk_crypto causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Tenda AX1803 1.0.0.1. The affected element is the function fromGetWifiGuestBasic of the file /goform/WifiGuestSet. Executing a manipulation of the argument guestWrlPwd/guestEn/guestSsid/hideSsid/guestSecurity can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formP2PLimitConfig. Performing a manipulation of the argument except results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT HiPER 810G up to 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formFireWall of the component Management Interface. The manipulation of the argument GroupName results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Totolink A3600R 5.9c.4959. This issue affects the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. Performing a manipulation of the argument apcliSsid results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in Tenda AC23 16.03.07.52. This affects the function sscanf of the file /goform/PowerSaveSet. Executing a manipulation of the argument Time can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function QoSSetup of the file /goform/QoSSetup. Performing manipulation of the argument ack_policy results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Tenda AC20 16.03.08.05. This vulnerability affects unknown code of the file /goform/fromAdvSetMacMtuWan. This manipulation of the argument wanMTU causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.

A vulnerability has been found in Tenda M3 1.0.0.12. Affected by this vulnerability is the function formGetMasterPassengerAnalyseData of the file /goform/getMasterPassengerAnalyseData. The manipulation of the argument Time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda AC20 16.03.08.12. This vulnerability affects the function save_virtualser_data of the file /goform/formSetVirtualSer. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A weakness has been identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function DisablePasswordAlertRedirect of the file /goform/DisablePasswordAlertRedirect. Executing manipulation of the argument hint can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.