A Command injection vulnerability in RaspAP 2.8.0 thru 2.8.7 allows unauthenticated attackers to execute arbitrary commands via the cfg_id parameter in /ajax/openvpn/activate_ovpncfg.php and /ajax/openvpn/del_ovpncfg.php.

In RaspAP raspap-webgui 3.0.9 and earlier, a command injection vulnerability exists in the clearlog.php script. The vulnerability is due to improper sanitization of user input passed via the logfile parameter.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

RaspAP before 3.1.5 allows an attacker to escalate privileges: the www-data user has write access to the restapi.service file and also possesses Sudo privileges to execute several critical commands without a password.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.9.2 allows an authenticated attacker to execute arbitrary OS commands as root via the "entity" POST parameters in /ajax/networking/get_wgkey.php.

Command injection vulnerability in RaspAP raspap-webgui 2.8.8 and earlier allows remote attackers to run arbitrary commands via crafted POST request to hostapd settings form.

Blink routers BL-WR9000 V2.4.9 , BL-AC2100_AZ3 V1.0.4, BL-X10_AC8 v1.0.5 , BL-LTE300 v1.2.3, BL-F1200_AT1 v1.0.0, BL-X26_AC8 v1.2.8, BLAC450M_AE4 v4.0.0 and BL-X26_DA3 v1.2.7 were discovered to contain a command injection vulnerability via the bs_SetSSIDHide function.

In Cassia Gateway firmware XC1000_2.1.1.2303082218 and XC2000_2.1.1.2303090947, the queueUrl parameter in /bypass/config is not sanitized. This leads to injecting Bash code and executing it with root privileges on device startup.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain a command injection via the setWanCfg function.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). Affected devices are vulnerable to command injection via the web server port 443/tcp, if the parameter “Remote Operation” is enabled. The parameter is disabled by default. The vulnerability could allow an unauthenticated remote attacker to perform arbitrary code execution on the device.

Blink routers BL-WR9000 V2.4.9 , BL-AC2100_AZ3 V1.0.4, BL-X10_AC8 v1.0.5 , BL-LTE300 v1.2.3, BL-F1200_AT1 v1.0.0, BL-X26_AC8 v1.2.8, BLAC450M_AE4 v4.0.0 and BL-X26_DA3 v1.2.7 were discovered to contain multiple command injection vulnerabilities via the dns1 and dns2 parameters in the bs_SetDNSInfo function.

An issue D-Link DIR-816-A2 DIR-816A2_FWv1.10CNB05_R1B011D88210 allows a remote attacker to execute arbitrary code via system() function in the bin/goahead file

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Jenkins Convert To Pipeline Plugin 1.0 and earlier uses basic string concatenation to convert Freestyle projects' Build Environment, Build Steps, and Post-build Actions to the equivalent Pipeline step invocations, allowing attackers able to configure Freestyle projects to prepare a crafted configuration that injects Pipeline script code into the (unsandboxed) Pipeline resulting from a convertion by Jenkins Convert To Pipeline Plugin.

Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to command injection. The variables exp_dir1, np7 and f0method8 take user input and pass it into the extract_f0_feature function, which concatenates them into a command that is run on the server. This can lead to arbitrary command execution. As of time of publication, no known patches exist.

A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01. Affected is the function wake_on_lan. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

DCME-320 v7.4.12.90 was discovered to contain a command injection vulnerability.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ruequest_certificate function.

An OS command injection vulnerability has been reported to affect HBS 3 Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 25.1.1.673 and later

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the setup_cacertificate function.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument telnet_enabled leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

In JetBrains Toolbox App before 2.6 command injection in SSH plugin was possible

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tty_server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument wifiOff can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was determined in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setLedCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument enable causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setSyslogCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setNetworkCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument proto results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument maxRtrAdvInterval causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wifiOff leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in flow computer and remote controller products of ABB ( RMC-100 (Standard), RMC-100-LITE, XIO, XFCG5 , XRCG5 , uFLOG5 , UDC) allows an attacker who successfully exploited this vulnerability could insert and run arbitrary code in an affected system node.

A vulnerability was found in FoundationAgents MetaGPT up to 0.8.1. Impacted is the function get_mime_type of the file metagpt/utils/common.py. The manipulation results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through a pull request but has not reacted yet.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sys_info results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wifiOff results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mode causes os command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setStorageCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sambaEnabled results in os command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold.  The Apm.UI.Areas.APM.Controllers.CommunityController allows execution of commands with iisapppool\nmconsole privileges.

An issue in DCME-320-L <=9.3.2.114 allows a remote attacker to execute arbitrary code via the log_u_umount.php component.