In RaspAP raspap-webgui 3.3.2 and earlier, a command injection vulnerability exists in the includes/hostapd.php script. The vulnerability is due to improper sanitizing of user input passed via the interface parameter.

In RaspAP raspap-webgui 3.0.9 and earlier, a command injection vulnerability exists in the clearlog.php script. The vulnerability is due to improper sanitization of user input passed via the logfile parameter.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

RaspAP before 3.1.5 allows an attacker to escalate privileges: the www-data user has write access to the restapi.service file and also possesses Sudo privileges to execute several critical commands without a password.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.9.2 allows an authenticated attacker to execute arbitrary OS commands as root via the "entity" POST parameters in /ajax/networking/get_wgkey.php.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

Command injection vulnerability in RaspAP raspap-webgui 2.8.8 and earlier allows remote attackers to run arbitrary commands via crafted POST request to hostapd settings form.

A command execution vulnerability exists in the validate.so diag_ping_start functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setRemoteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setStaticDhcpRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument enable results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument FileName causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWanCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument enabled leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setWiFiWpsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument wscDisabled leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setParentalRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.

An issue was discovered in KaiOS 3.0 before 3.1. The /system/bin/tctweb_server binary exposes a local web server that responds to GET and POST requests on port 2929. The server accepts arbitrary Bash commands and executes them as root. Because it is not permission or context restricted and returns proper CORS headers, it's accessible to all websites via the browser. At a bare minimum, this allows an attacker to retrieve a list of the user's installed apps, notifications, and downloads. It also allows an attacker to delete local files and modify system properties including the boolean persist.moz.killswitch property (which would render the device inoperable). This vulnerability is partially mitigated by SELinux which prevents reads, writes, or modifications to files or permissions within protected partitions.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setOpModeCfg. This vulnerability allows an attacker to execute arbitrary commands through the "hostName" parameter.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument mode can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setWiFiAdvancedCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument bgProtection results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in Totolink N300RH 6.1c.1353_B20190305. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a command insertion vulnerability in setDiagnosisCfg.This vulnerability allows an attacker to execute arbitrary commands through the "ip" parameter.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument ip results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setOpenVpnCertGenerationCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument servername can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the staticGw parameter at /setting/setWanIeCfg.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

A weakness has been identified in Wavlink WL-WN570HA1 R70HA1 V1410_221110. This issue affects the function set_sys_adm of the file /cgi-bin/adm.cgi. This manipulation of the argument Username causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setAppFilterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been identified in Spectrum Power 4 (with Web Office Portal). An attacker with network access to the web server on port 80/TCP or 443/TCP could execute system commands with administrative privileges. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected service. No user interaction is required to exploit this security vulnerability. Successful exploitation of the security vulnerability compromises confidentiality, integrity or availability of the targeted system. At the time of advisory publication no public exploitation of this security vulnerability was known.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the setWAN function in /bin/webs without any limitations.

In Cassia Gateway firmware XC1000_2.1.1.2303082218 and XC2000_2.1.1.2303090947, the queueUrl parameter in /bypass/config is not sanitized. This leads to injecting Bash code and executing it with root privileges on device startup.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the mp function in /bin/webs without any limitations.

There is a command injection vulnerability in the adslr VW2100 router with firmware version M1DV1.0. An unauthenticated attacker can exploit the vulnerability to execute system commands as the root user.

Command Injection vulnerability in MagnusSolution magnusbilling 6.x and 7.x allows remote attackers to run arbitrary commands via unauthenticated HTTP request.

TOTOLINK outdoor CPE CP450 v4.1.0cu.747_B20191224 was discovered to contain a command injection vulnerability in the setUpgradeFW function via the FileName parameter.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows unauthenticated remote code execution via an XML document.

A security flaw has been discovered in Tenda AC6 15.03.06.49_multi_TDE01. Affected is the function fromSetWirelessRepeat of the file /goform/WifiExtraSet of the component httpd. Performing a manipulation of the argument mac/ssid results in os command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an un-authenticated attacker to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in multiple command endpoints

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function Vulnerability of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument proto leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setNtpCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tz results in os command injection. The attack can be executed remotely. The exploit is now public and may be used.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setVpnAccountCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument User leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in Anyka Microelectronics AK3918EV300 MCU v18. A command injection vulnerability in the network configuration script within the MCU's operating system allows attackers to perform arbitrary command execution via a crafted wifi SSID or password.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument telnet_enabled leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the hostname parameter in the setOpModeCfg function.