On Feb 15, 2023, the following vulnerability in the ClamAV scanning library was disclosed: A vulnerability in the HFS+ partition file parser of ClamAV versions 1.0.0 and earlier, 0.105.1 and earlier, and 0.103.7 and earlier could allow an unauthenticated, remote attacker to execute arbitrary code. This vulnerability is due to a missing buffer size check that may result in a heap buffer overflow write. An attacker could exploit this vulnerability by submitting a crafted HFS+ partition file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the ClamAV scanning process, or else crash the process, resulting in a denial of service (DoS) condition. For a description of this vulnerability, see the ClamAV blog ["https://blog.clamav.net/"].

An issue was discovered in NeoMutt before 2018-07-16. nntp_add_group in newsrc.c has a stack-based buffer overflow because of incorrect sscanf usage.

Buffer overflow in NetBIOS QNAME registering and communication process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

HDF5 library through 1.14.3 has memory corruption in H5A__close resulting in the corruption of the instruction pointer and causing denial of service or potential code execution.

OpenConnect VPN client with GnuTLS before 5.02 contains a heap overflow if MTU is increased on reconnection.

Buffer overflow in IPP number-up attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

Buffer overflow in mDNS NSEC record registering process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.

libfreeimage in FreeImage 3.4.0 through 3.18.0 has a stack-based buffer overflow in the PluginXPM.cpp Load function via an XPM file.

In nDPI through 3.2, there is a stack overflow in extractRDNSequence in lib/protocols/tls.c.

Wazuh is a free and open source platform used for threat prevention, detection, and response. There is a buffer overflow hazard in wazuh-analysisd when handling Unicode characters from Windows Eventchannel messages. It impacts Wazuh Manager 3.8.0 and above. This vulnerability is fixed in Wazuh Manager 4.7.2.

An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.

RIOT 2020.04 has a buffer overflow in the base64 decoder. The decoding function base64_decode() uses an output buffer estimation function to compute the required buffer capacity and validate against the provided buffer size. The base64_estimate_decode_size() function calculates the expected decoded size with an arithmetic round-off error and does not take into account possible padding bytes. Due to this underestimation, it may be possible to craft base64 input that causes a buffer overflow.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.

Buffer Overflow vulnerability in Bento4 Bento v.1.6.0-641 allows a remote attacker to execute arbitrary code via the AP4 BitReader::ReadCache() at Ap4Utils.cpp component.

A vulnerability has been found in FreeFloat FTP Server 1.0 and classified as critical. This vulnerability affects unknown code of the component MLS Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.5.0), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.9.2), SIMATIC S7-1500 Software Controller (All versions < V21.9), SIMATIC S7-PLCSIM Advanced (All versions < V4.0), SINAMICS PERFECT HARMONY GH180 Drives (Drives manufactured before 2021-08-13), SINUMERIK MC (All versions < V6.15), SINUMERIK ONE (All versions < V6.15). Affected devices are vulnerable to a memory protection bypass through a specific operation. A remote unauthenticated attacker with network access to port 102/tcp could potentially write arbitrary data and code to protected memory areas or read sensitive data to launch further attacks.

An issue in newlib v.4.3.0 allows an attacker to execute arbitrary code via the time unit scaling in the _gettimeofday function.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All versions < V5.2.5), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.0). The webserver of the affected devices contains a vulnerability that may lead to a heap overflow condition. An attacker could cause this condition on the webserver by sending specially crafted requests. This could stop the webserver temporarily.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Stack-based Buffer Overflow vulnerability in the ONVIF server component of Victure PC420 smart camera allows an attacker to execute remote code on the target device. This issue affects: Victure PC420 firmware version 1.2.2 and prior versions.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component LCD Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the serverName parameter in the function fromAdvSetMacMtuWan.

A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.

Cap'n Proto is a data interchange format and capability-based RPC system. In versions 1.0 and 1.0.1, when using the KJ HTTP library with WebSocket compression enabled, a buffer underrun can be caused by a remote peer. The underrun always writes a constant value that is not attacker-controlled, likely resulting in a crash, enabling a remote denial-of-service attack. Most Cap'n Proto and KJ users are unlikely to have this functionality enabled and so unlikely to be affected. Maintainers suspect only the Cloudflare Workers Runtime is affected. If KJ HTTP is used with WebSocket compression enabled, a malicious peer may be able to cause a buffer underrun on a heap-allocated buffer. KJ HTTP is an optional library bundled with Cap'n Proto, but is not directly used by Cap'n Proto. WebSocket compression is disabled by default. It must be enabled via a setting passed to the KJ HTTP library via `HttpClientSettings` or `HttpServerSettings`. The bytes written out-of-bounds are always a specific constant 4-byte string `{ 0x00, 0x00, 0xFF, 0xFF }`. Because this string is not controlled by the attacker, maintainers believe it is unlikely that remote code execution is possible. However, it cannot be ruled out. This functionality first appeared in Cap'n Proto 1.0. Previous versions are not affected. This issue is fixed in Cap'n Proto 1.0.1.1.

A buffer overflow vulnerability exists in all versions of sngrep since v0.4.2, due to improper handling of 'Call-ID' and 'X-Call-ID' SIP headers. The functions sip_get_callid and sip_get_xcallid in sip.c use the strncpy function to copy header contents into fixed-size buffers without checking the data length. This flaw allows remote attackers to execute arbitrary code or cause a denial of service (DoS) through specially crafted SIP messages.

On Netcomm router models NF20MESH, NF20, and NL1902 a stack based buffer overflow affects the sessionKey parameter. By providing a specific number of bytes, the instruction pointer is able to be overwritten on the stack and crashes the application at a known location.

Mozilla developers and community members reported memory safety bugs present in Firefox 81 and Firefox ESR 78.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.4, Firefox < 82, and Thunderbird < 78.4.

NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

an attacker with knowledge of user/pass of Grandstream GSD3710 in its 1.0.11.13 version, could overflow the stack since it doesn't check the param length before use the strcopy instruction. The explotation of this vulnerability may lead an attacker to execute a shell with full access.

The Hipchat for Mac desktop client is vulnerable to client-side remote code execution via video call link parsing. Hipchat for Mac desktop clients at or above version 4.0 and before version 4.30 are affected by this vulnerability.

Multiple buffer overflow vulnerabilities in REST API in Brocade Fabric OS versions v8.2.1 through v8.2.1d, and 8.2.2 versions before v8.2.2c could allow remote unauthenticated attackers to perform various attacks.

In read_attr_value of gatt_db.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12 Android-12LAndroid ID: A-228078096

pycdc commit 44a730f3a889503014fec94ae6e62d8401cb75e5 was discovered to contain a stack overflow via the component ASTree.cpp:BuildFromCode.

In libIEC61850 before version 1.4.3, when a message with COTP message length field with value < 4 is received an integer underflow will happen leading to heap buffer overflow. This can cause an application crash or on some platforms even the execution of remote code. If your application is used in open networks or there are untrusted nodes in the network it is highly recommend to apply the patch. This was patched with commit 033ab5b. Users of version 1.4.x should upgrade to version 1.4.3 when available. As a workaround changes of commit 033ab5b can be applied to older versions.

nsak64.sys in Norman Malware Cleaner 2.08.08 allows users to call arbitrary kernel functions because the passing of function pointers between user and kernel mode is mishandled.

An issue was discovered in the jsrsasign package before 8.0.17 for Node.js. Its RSASSA-PSS (RSA-PSS) implementation does not detect signature manipulation/modification by prepending '\0' bytes to a signature (it accepts these modified signatures as valid). An attacker can abuse this behavior in an application by creating multiple valid signatures where only one signature should exist. Also, an attacker might prepend these bytes with the goal of triggering memory corruption issues.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

Stack-based buffer overflow vulnerability in Vigor3900, Vigor2960, and Vigor300B with firmware before 1.5.1.1.

Multiple out-of-bounds write vulnerabilities exist in the translationVectors parsing functionality in multiple supported formats of Open Babel 3.1.1 and master commit 530dbfa3. A specially-crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability affects the Gaussian file format

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the wepkey1 parameter at /goform/WifiBasicSet.

A memory corruption vulnerability is present in bspatch as shipped in Colin Percival’s bsdiff tools version 4.3. Insufficient checks when handling external inputs allows an attacker to bypass the sanity checks in place and write out of a dynamically allocated buffer boundaries.

Multiple out-of-bounds write vulnerabilities exist in the ORCA format nAtoms functionality of Open Babel 3.1.1 and master commit 530dbfa3. A specially-crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.nAtoms calculation wrap-around, leading to a small buffer allocation

Some smartphones have the out-of-bounds write vulnerability.Successful exploitation of this vulnerability may cause system service exceptions.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the reject_url parameter in the reject (sub_41BD60) function.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the del_num parameter in the icp_delete_img (sub_41DEDC) function.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the cameo.cameo.nslookup_target parameter in the tools_nslookup function.

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the wrlEn parameter at /goform/WifiBasicSet.