Improper restriction of excessive authentication attempts with two factor authentication methods in Checkmk 2.3 before 2.3.0p6 facilitates brute-forcing of second factor mechanisms.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). The affected application does not properly implement brute force protection against user credentials in its web API. This could allow an attacker to learn user credentials that are vulnerable to brute force attacks.

An attacker can freely brute force username and password and can takeover any account. An attacker could easily guess user passwords and gain access to user and administrative accounts.

Weak password derivation for export in Devolutions Remote Desktop Manager before 2022.1 allows information disclosure via a password brute-force attack. An error caused base64 to be decoded.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 is vulnerable to user enumeration, allowing an attacker to brute force into the system. IBM X-Force ID: 157013.

An issue has been discovered in GitLab CE/EE affecting all versions before 15.1.6, all versions starting from 15.2 before 15.2.4, all versions starting from 15.3 before 15.3.2. It may be possible for an attacker to guess a user's password by brute force by sending crafted requests to a specific endpoint, even if the victim user has 2FA enabled on their account.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application does not employ any countermeasures against Password Spraying attacks or Credential Stuffing attacks. An attacker could obtain a list of valid usernames on the device by exploiting the issue and then perform a precise Password Spraying or Credential Stuffing attack in order to obtain access to at least one account.

The IPsec VPN blade has a dedicated portal for downloading and connecting through SSL Network Extender (SNX). If the portal is configured for username/password authentication, it is vulnerable to a brute-force attack on usernames and passwords.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows attackers to bypass account-lockout and CAPTCHA protections. Unauthenticated remote attackers can more easily brute force passwords.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) did not implement account lockout. Local account credentials may be extracted from the device via brute force guessing attacks.

File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. Prior to version 2.34.1, a missing password policy and brute-force protection makes the authentication process insecure. Attackers could mount a brute-force attack to retrieve the passwords of all accounts in a given instance. This issue has been patched in version 2.34.1.

Information disclosure in Logon Page in MV's mConnect application v02.001.00 allows an attacker to know valid users from the application's database via brute force.

Dell CloudBoost Virtual Appliance, versions 19.13.0.0 and prior, contains an Improper Restriction of Excessive Authentication Attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Lack of protection against brute force attacks in M-Files Server before 23.12.13205.0 allows an attacker unlimited authentication attempts, potentially compromising targeted M-Files user accounts by guessing passwords.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

IBM DevOps Plan 3.0.0 through 3.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

Missing Rate Limiting in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 on the Login Form allows an unauthenticated remote attacker to perform multiple login attempts, which facilitates gaining privileges.

Improper Restriction of Excessive Authentication Attempts vulnerability in Mia Technology Inc. Mia-Med Health Aplication allows Interface Manipulation. This issue affects Mia-Med Health Aplication: before 1.0.14.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

OpenStack Keystone 10.x through 16.x before 16.0.2, 17.x before 17.0.1, 18.x before 18.0.1, and 19.x before 19.0.1 allows information disclosure during account locking (related to PCI DSS features). By guessing the name of an account and failing to authenticate multiple times, any unauthenticated actor could both confirm the account exists and obtain that account's corresponding UUID, which might be leveraged for other unrelated attacks. All deployments enabling security_compliance.lockout_failure_attempts are affected.

Cryptocat before 2.0.42 has Group Chat ECC Private Key Generation Brute Force Weakness

firefly-iii is vulnerable to Improper Restriction of Excessive Authentication Attempts

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

IBM Concert Software 1.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the public DAV endpoint. This may have allowed an attacker to enumerate potentially valid share tokens or credentials. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.

IBM Security Verify Identity Manager 10.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 224918.

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

OpenEMR 7.0.1 contains an authentication brute force vulnerability that allows attackers to bypass rate limiting protections by sending repeated login attempts to the main login endpoint. Attackers can submit POST requests with authUser and clearPass parameters to systematically test username and password combinations without account lockout restrictions.

PasswordPusher before 2.9.2 contains a brute-force vulnerability in the POST /p/:token/access endpoint that lacks route-specific rate limiting and per-push lockout mechanisms. Attackers who know a push token can systematically guess passphrases at 120 attempts per minute without triggering any push-level defense, making short or dictionary-derived passphrases practically recoverable within hours or days.

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

A vulnerability has been identified in SINEC Traffic Analyzer (6GK8822-1BG01-0BA0) (All versions < V2.0). The affected application do not properly enforce restriction of excessive authentication attempts. This could allow an unauthenticated attacker to conduct brute force attacks against legitimate user credentials or keys.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). The affected application does not properly implement brute force protection against user credentials in its Client Communication component. This could allow an attacker to learn user credentials that are vulnerable to brute force attacks.

IBM Security Guardium 11.2 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196314.

Improper Restriction of Excessive Authentication Attempts vulnerability exists in all hardware versions of spaceLYnk and Wiser for KNX (formerly homeLYnk) which could allow an attacker to guess a password when brute force is used.

The MEAC300-FNADE4 does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 179478.

IBM Security Identity Governance and Intelligence 5.2.6 could allow an attacker to enumerate usernames to find valid login credentials which could be used to attempt further attacks against the system. IBM X-Force ID: 175336.

In Solstice Pod before 3.3.0 (or Open4.3), the screen key can be enumerated using brute-force attacks via the /lookin/info Solstice Open Control API because there are only 1.7 million possibilities.

In Solstice Pod before 3.3.0 (or Open4.3), the Administrator password can be enumerated using brute-force attacks via the /Config/service/initModel?password= Solstice Open Control API because there is no complexity requirement (e.g., it might be all digits or all lowercase letters).

IBM PowerSC 1.3, 2.0, and 2.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 275107.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (with TEEGRIS) software. Attackers can determine user credentials via a brute-force attack against the Gatekeeper trustlet. The Samsung ID is SVE-2020-16908 (May 2020).

By default, .ZED containers produced by PRIMX ZED! for Windows before Q.2020.3 (ANSSI qualification submission); ZED! for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before 2023.5; ZEDMAIL for Windows before 2023.5; and ZED! for Windows, Mac, Linux before 2023.5 include an encrypted version of sensitive user information, which could allow an unauthenticated attacker to obtain it via brute force.

The Web UI component of Mitel MiVoice 6800 and 6900 series SIP Phones with firmware before 5.1.0.SP5 could allow an unauthenticated attacker to expose sensitive information due to improper memory handling during failed login attempts.

blueprintUE is a tool to help Unreal Engine developers. Prior to 4.2.0, the login form handler performs no throttling of any kind. Failed authentication attempts are processed at full network speed with no IP-based rate limiting, no per-account attempt counter, no temporary lockout, no progressive delay (Tarpit), and no CAPTCHA challenge. An attacker can submit an unlimited number of credential guesses. The password policy (10+ characters, mixed case, digit, special character) reduces the effective keyspace but does not prevent dictionary attacks, credential stuffing from breached databases, or targeted attacks against known users with predictable passwords. This vulnerability is fixed in 4.2.0.

U-SPEED N300 router V1.0.0 does not implement rate limiting or account lockout protections on the /api/login endpoint. This allows an attacker on the local network to perform unlimited authentication attempts, enabling brute-force attacks against the administrator account and potential unauthorized access to the router management interface.

The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. In affected versions the login method has no rate limit. An attacker may be able to leverage this vulnerability to gain access to user accounts. This issue has been addressed in version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Eaton Intelligent Power Protector (IPP) software allows repeated authentication attempts against the web interface login page due to insufficient rate‑limiting controls. This security issue has been fixed in the latest version of Eaton IPP which is available on the Eaton download centre.