Buffer overflow in Zephyr USB DFU DNLOAD. Zephyr versions >= v2.5.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-c3gr-hgvr-f363

An integer overflow can be triggered in SQLite’s `concat_ws()` function. The resulting, truncated integer is then used to allocate a buffer. When SQLite then writes the resulting string to the buffer, it uses the original, untruncated size and thus a wild Heap Buffer overflow of size ~4GB can be triggered. This can result in arbitrary code execution.

SunGrow WiNet-SV200.001.00.P027 and earlier versions is vulnerable to heap-based buffer overflow due to bounds checks of the MQTT message content.

A vulnerability has been identified in Opcenter Execution Foundation (All versions), Opcenter Intelligence (All versions), Opcenter Quality (All versions), Opcenter RDL (All versions), SIMATIC PCS neo V4.0 (All versions), SIMATIC PCS neo V4.1 (All versions < V4.1 Update 3), SIMATIC PCS neo V5.0 (All versions < V5.0 Update 1), SINEC NMS (All versions if operated in conjunction with UMC < V2.15), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions), Totally Integrated Automation Portal (TIA Portal) V18 (All versions), Totally Integrated Automation Portal (TIA Portal) V19 (All versions). Affected products contain a heap-based buffer overflow vulnerability in the integrated UMC component. This could allow an unauthenticated remote attacker to execute arbitrary code.

IBM Tivoli Monitoring 6.3.0.7 through 6.3.0.7 Service Pack 20 is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

Heap-based buffer overflow in SuiteLink server while processing commands 0x05/0x06

Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.

The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request.

PX4-Autopilot provides PX4 flight control solution for drones. In versions 1.14.0-rc1 and prior, PX4-Autopilot has a heap buffer overflow vulnerability in the parser function due to the absence of `parserbuf_index` value checking. A malfunction of the sensor device can cause a heap buffer overflow with leading unexpected drone behavior. Malicious applications can exploit the vulnerability even if device sensor malfunction does not occur. Up to the maximum value of an `unsigned int`, bytes sized data can be written to the heap memory area. As of time of publication, no fixed version is available.

Fuji Electric V-Server 4.0.3.0 and prior, A heap-based buffer overflow vulnerability has been identified, which may allow remote code execution.

ClickHouse® is an open-source column-oriented database management system that allows generating analytical data reports in real-time. A heap buffer overflow issue was discovered in ClickHouse server. An attacker could send a specially crafted payload to the native interface exposed by default on port 9000/tcp, triggering a bug in the decompression logic of T64 codec that crashes the ClickHouse server process. This attack does not require authentication. Note that this exploit can also be triggered via HTTP protocol, however, the attacker will need a valid credential as the HTTP authentication take places first. This issue has been fixed in version 23.10.2.13-stable, 23.9.4.11-stable, 23.8.6.16-lts and 23.3.16.7-lts.

A heap-based buffer overflow vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP git commit 80d4004. A specially crafted network packet can lead to arbitrary code execution. An attacker can send a malicious packet to trigger this vulnerability.

IBM Tivoli Monitoring 6.3.0.7 through 6.3.0.7 Service Pack 20 is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

Heap-based Buffer Overflow in GitHub repository radareorg/radare2 prior to 5.9.0.

Heap-based Buffer Overflow vulnerability in Samsung Open Source Escargot JavaScript engine allows Overflow Buffers.This issue affects Escargot: 4.0.0.

A memory corruption vulnerability in Fluent Bit versions 2.0.7 thru 3.0.3. This issue lies in the embedded http server’s parsing of trace requests and may result in denial of service conditions, information disclosure, or remote code execution.

An improper input validation vulnerability in libswmfextractor library prior to SMR APR-2021 Release 1 allows attackers to execute arbitrary code on mediaextractor process.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT PRO (All versions < 5.5.1), SCALANCE X202-2 IRT (All versions < 5.5.1), SCALANCE X202-2P IRT (incl. SIPLUS NET variant) (All versions < 5.5.1), SCALANCE X202-2P IRT PRO (All versions < 5.5.1), SCALANCE X204 IRT (All versions < 5.5.1), SCALANCE X204 IRT PRO (All versions < 5.5.1), SCALANCE X204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2FM (All versions < V5.2.5), SCALANCE X204-2LD (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2LD TS (All versions < V5.2.5), SCALANCE X204-2TS (All versions < V5.2.5), SCALANCE X206-1 (All versions < V5.2.5), SCALANCE X206-1LD (All versions < V5.2.5), SCALANCE X208 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X208PRO (All versions < V5.2.5), SCALANCE X212-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X212-2LD (All versions < V5.2.5), SCALANCE X216 (All versions < V5.2.5), SCALANCE X224 (All versions < V5.2.5), SCALANCE XF201-3P IRT (All versions < 5.5.1), SCALANCE XF202-2P IRT (All versions < 5.5.1), SCALANCE XF204 (All versions < V5.2.5), SCALANCE XF204 IRT (All versions < 5.5.1), SCALANCE XF204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE XF204-2BA IRT (All versions < 5.5.1), SCALANCE XF206-1 (All versions < V5.2.5), SCALANCE XF208 (All versions < V5.2.5). Incorrect processing of POST requests in the webserver may result in write out of bounds in heap. An attacker might leverage this to cause denial-of-service on the device and potentially remotely execute code.

An improper input validation vulnerability in libsapeextractor library prior to SMR Sep-2021 Release 1 allows attackers to execute arbitrary code in mediaextractor process.

An improper input validation vulnerability in sdfffd_parse_chunk_PROP() with Sample Rate Chunk in libsdffextractor library prior to SMR MAY-2021 Release 1 allows attackers to execute arbitrary code on mediaextractor process.

An improper input validation vulnerability in scmn_mfal_read() in libsapeextractor library prior to SMR MAY-2021 Release 1 allows attackers to execute arbitrary code on mediaextractor process.

A missing bounds check in image blurring code prior to WhatsApp for Android v2.21.22.7 and WhatsApp Business for Android v2.21.22.7 could have allowed an out-of-bounds write if a user sent a malicious image.

Due to incorrect string size calculations inside the preg_quote function, a large input string passed to the function can trigger an integer overflow leading to a heap overflow. This issue affects HHVM versions prior to 4.56.3, all versions between 4.57.0 and 4.80.1, all versions between 4.81.0 and 4.93.1, and versions 4.94.0, 4.95.0, 4.96.0, 4.97.0, 4.98.0.

The calling logic for WhatsApp for Android prior to v2.21.23, WhatsApp Business for Android prior to v2.21.23, WhatsApp for iOS prior to v2.21.230, WhatsApp Business for iOS prior to v2.21.230, WhatsApp for KaiOS prior to v2.2143, WhatsApp Desktop prior to v2.2146 could have allowed an out-of-bounds write if a user makes a 1:1 call to a malicious actor.

An Heap-based Buffer Overflow in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.

Passing an attacker controlled size when creating an IOBuf could cause integer overflow, leading to an out of bounds write on the heap with the possibility of remote code execution. This issue affects versions of folly prior to v2021.07.22.00. This issue affects HHVM versions prior to 4.80.5, all versions between 4.81.0 and 4.102.1, all versions between 4.103.0 and 4.113.0, and versions 4.114.0, 4.115.0, 4.116.0, 4.117.0, 4.118.0 and 4.118.1.

Windows Remote Desktop Licensing Service Remote Code Execution Vulnerability

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. A critical heap buffer overflow vulnerability was identified in the `Crypto_AOS_ProcessSecurity` function of CryptoLib versions 1.3.3 and prior. This vulnerability allows an attacker to trigger a Denial of Service (DoS) or potentially execute arbitrary code (RCE) by providing a maliciously crafted AOS frame with an insufficient length. The vulnerability lies in the function `Crypto_AOS_ProcessSecurity`, specifically during the processing of the Frame Error Control Field (FECF). The affected code attempts to read from the `p_ingest` buffer at indices `current_managed_parameters_struct.max_frame_size - 2` and `current_managed_parameters_struct.max_frame_size - 1` without verifying if `len_ingest` is sufficiently large. This leads to a heap buffer overflow when `len_ingest` is smaller than `max_frame_size`. As of time of publication, no known patched versions exist.

vCenter Server contains a heap-overflow vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger this vulnerability by sending a specially crafted network packet potentially leading to remote code execution.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In versions 1.3.3 and prior, an unsigned integer underflow in the `Crypto_TC_ProcessSecurity` function of CryptoLib leads to a heap buffer overflow. The vulnerability is triggered when the `fl` (frame length) field in a Telecommand (TC) packet is set to 0. This underflow causes the frame length to be interpreted as 65535, resulting in out-of-bounds memory access. This critical vulnerability can be exploited to cause a denial of service (DoS) or potentially achieve remote code execution. Users of CryptoLib are advised to apply the recommended patch or avoid processing untrusted TC packets until a fix is available.

Microsoft Protected Extensible Authentication Protocol (PEAP) Remote Code Execution Vulnerability

A flaw was found in htmldoc before v1.9.12. Heap buffer overflow in pspdf_prepare_outpages(), in ps-pdf.cxx may lead to execute arbitrary code and denial of service.

When reading DesFire keys, the function that reads the card isn't properly checking the boundaries when copying internally the data received. This allows a heap based buffer overflow that could lead to a potential Remote Code Execution on the targeted device. This is especially problematic if you use Default DESFire key.

Advantech WebAccess Node, Version 8.4.4 and prior, Version 9.0.0. Multiple heap-based buffer overflow vulnerabilities exist caused by a lack of proper validation of the length of user-supplied data, which may allow remote code execution.

wasm3 v0.5.0 was discovered to contain a heap buffer overflow which leads to segmentation fault via the function "DeallocateSlot" in wasm3/source/m3_compile.c.

A heap-based buffer overflow vulnerability exists in the XML Decompression EnumerationUncompressor::UncompressItem functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

A heap-based buffer overflow vulnerability exists in the XML Decompression LabelDict::Load functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

All versions of GE Digital CIMPLICITY that are not adhering to SDG guidance and accepting documents from untrusted sources are vulnerable to memory corruption issues due to insufficient input validation, including issues such as out-of-bounds reads and writes, use-after-free, stack-based buffer overflows, uninitialized pointers, and a heap-based buffer overflow. Successful exploitation could allow an attacker to execute arbitrary code.

A memory corruption vulnerability exists in the XML-parsing ParseAttribs functionality of AT&T Labs’ Xmill 0.7. A specially crafted XML file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Heap-based buffer overflow vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Netatalk. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dsi_writeinit function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-17646.

NVIDIA Triton Inference Server contains a vulnerability in the HTTP server, where an attacker could start a reverse shell by sending a specially crafted HTTP request. A successful exploit of this vulnerability might lead to remote code execution, denial of service, data tampering, or information disclosure.

Heap-based Buffer Overflow vulnerability in Samsung Open Source Escargot JavaScript engine allows Overflow Buffers.This issue affects Escargot: 4.0.0.

A code execution vulnerability exists in the DDS scanline parsing functionality of OpenImageIO Project OpenImageIO v2.4.4.2. A specially-crafted .dds can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

A heap based buffer overflow vulnerability exists in the PSD thumbnail resource parsing code of OpenImageIO 2.3.19.0. A specially-crafted PSD file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

There is a buffer overwrite vulnerability in the Quram qmg library of Samsung's Android OS versions O(8.x), P(9.0) and Q(10.0). An unauthenticated, unauthorized attacker sending a specially crafted MMS to a vulnerable phone can trigger a heap-based buffer overflow in the Quram image codec leading to an arbitrary remote code execution (RCE) without any user interaction. The Samsung ID is SVE-2020-16747.

In Bluetooth driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00418044; Issue ID: MSV-3482.

Wazuh is a free and open source platform used for threat prevention, detection, and response. There is a buffer overflow hazard in wazuh-analysisd when handling Unicode characters from Windows Eventchannel messages. It impacts Wazuh Manager 3.8.0 and above. This vulnerability is fixed in Wazuh Manager 4.7.2.