An authenticated OS command injection vulnerability exists in various Linksys router models (tested on WRT160Nv2) running firmware version v2.0.03 via the apply.cgi endpoint. The web interface fails to properly sanitize user-supplied input passed to the ping_size parameter during diagnostic operations. An attacker with valid credentials can inject arbitrary shell commands, enabling remote code execution.

Command injection vulnerability in Linksys MR8300 router while Registration to DDNS Service. By specifying username and password, an attacker connected to the router's web interface can execute arbitrary OS commands. The username and password fields are not sanitized correctly and are used as URL construction arguments, allowing URL redirection to an arbitrary server, downloading an arbitrary script file, and eventually executing the file in the device. This issue affects: Linksys MR8300 Router 1.0.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via wizard_status.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via userEmail.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

Linksys E3000 1.0.06.002_US is vulnerable to command injection via the diag_ping_start function.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the PinCode parameter at /API/info form endpoint.

An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Linksys WVBR0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web management portal. The issue lies in the lack of proper validation of user data before executing a system call. An attacker could leverage this vulnerability to execute code with root privileges. Was ZDI-CAN-4892.

Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI.

Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

Linksys Velop 1.1.2.187020 devices allow unauthenticated command injection, providing an attacker with full root access, via cgi-bin/zbtest.cgi or cgi-bin/zbtest2.cgi (scripts that can be discovered with binwalk on the firmware, but are not visible in the web interface). This occurs because shell metacharacters in the query string are mishandled by ShellExecute, as demonstrated by the zbtest.cgi?cmd=level&level= substring. This can also be exploited via CSRF.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via the field id_email_check_btn.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page.

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

A vulnerability classified as critical has been found in D-Link DIR‑817L up to 1.04B01. This affects the function lxmldbc_system of the file ssdpcgi. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

An OS command injection vulnerability exists in the NAT parameter of GoCast 1.1.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

The administrative web interface in Cisco TelePresence Video Communication Server Expressway X8.5.2 allows remote authenticated users to execute arbitrary commands via crafted fields, aka Bug ID CSCuv12531.

In the web ui of the openbuildservice before 2.3.0 a code injection of the project rebuildtimes statistics could be used by authorized attackers to execute shellcode.

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

A flaw was found in WebSVN 2.3.2. Without prior authentication, if the 'allowDownload' option is enabled in config.php, an attacker can invoke the dl.php script and pass a well formed 'path' argument to execute arbitrary commands against the underlying operating system.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

OS command injection vulnerability exists in ffBull ver.4.11, which may allow a remote unauthenticated attacker to execute an arbitrary OS command with the privilege of the running web server. Note that the developer was unreachable, therefore, users should consider stop using ffBull ver.4.11.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DIR‑818L up to 1.05B01. This issue affects the function getenv of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

A vulnerability was determined in Wavlink WL-NU516U1 M16U1_V240425. This impacts the function sub_4032E4 of the file /cgi-bin/wireless.cgi. This manipulation of the argument Guest_ssid causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

A vulnerability has been found in TOTOLINK N350R 1.2.3-B20130826. This vulnerability affects unknown code of the file /boafrm/formSysCmd. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257667. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a ping tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.