CWE-918: Server-Side Request Forgery (SSRF) vulnerability exists that could cause unauthorized access to sensitive data when an attacker configures the application to access a malicious url.

A CWE-200: Information Exposure vulnerability exists that could cause the exposure of sensitive information stored on the memory of the controller when communicating over the Modbus TCP protocol. Affected Products: Modicon M340 CPU (part numbers BMXP34*) (Versions prior to V3.30), Modicon M580 CPU (part numbers BMEP* and BMEH*) (Versions prior to SV3.20), Modicon MC80 (BMKC80) (Versions prior to V1.6), Modicon M580 CPU Safety (part numbers BMEP58*S and BMEH58*S) (All Versions), Modicon Momentum MDI (171CBU*) (Versions prior to V2.3), Legacy Modicon Quantum (All Versions)

CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.

CWE-312: Cleartext Storage of Sensitive Information vulnerability exists that could cause the disclosure of a sensitive information which could result in revealing protected source code and loss of confidentiality, When an authorized attacker accesses the source code for editing or compiling it.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause account takeover when a brute force attack is performed on the account. Affected Products: NetBotz 4 - 355/450/455/550/570 (V4.7.0 and prior)

A CWE-311: Missing Encryption of Sensitive Data vulnerability exists that could allow authentication credentials to be recovered when an attacker breaks the encoding. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)

A CWE-787: Out-of-bounds Write vulnerability exists that could cause sensitive information leakage when accessing a malicious web page from the commissioning software. Affected Products: SoMachine HVAC (Versions prior to V2.1.0), EcoStruxure Machine Expert – HVAC (Versions prior to V1.4.0)

A CWE-668: Exposure of Resource to Wrong Sphere vulnerability exists that could cause all remote domains to access the resources (data) supplied by the server when an attacker sends a fetch request from third-party site or malicious site. Affected Products: EcoStruxure Power Commission (Versions prior to V2.22)

CWE-200: Information Exposure vulnerability exists that could cause disclosure of credentials when a specially crafted message is sent to the device.

A CWE-200: Information Exposure vulnerability exists in Modicon Controllers (M340 CPUs, M340 communication modules, Premium CPUs, Premium communication modules, Quantum CPUs, Quantum communication modules - see security notification for specific versions), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.

A CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exists that could cause information disclosure when specific messages are sent to the server over the database server TCP port. Affected Products: EcoStruxure Geo SCADA Expert 2019 - 2021 (formerly known as ClearSCADA) (Versions prior to October 2022)

CWE-610: Externally Controlled Reference to a Resource in Another Sphere vulnerability exists that could cause a loss of confidentiality when an unauthenticated attacker manipulates controller’s webserver URL to access resources.

CWE-552: Files or Directories Accessible to External Parties vulnerability exists that could allow unauthenticated files and logs exfiltration and download of files when an attacker modifies the URL to download to a different location.

A CWE-918: Server-Side Request Forgery (SSRF) vulnerability exists that could cause unauthenticated remote code execution when the server is accessed via the network with knowledge of hidden URLs and manipulation of host request header.

ControlID iDSecure On-premises versions 4.7.48.0 and prior are vulnerable to a server-side request forgery vulnerability which could allow an unauthenticated attacker to retrieve information from other servers.

Server Side Request Forgery (SSRF) vulnerability in NebulaGraph Studio version 3.7.0, allows remote attackers to gain sensitive information.

Discourse is an open-source discussion platform. Prior to version 3.1.0.beta3 of the `beta` and `tests-passed` branches, attackers are able to bypass Discourse's server-side request forgery (SSRF) protection for private IPv4 addresses by using a IPv4-mapped IPv6 address. The issue is patched in the latest beta and tests-passed version of Discourse. version 3.1.0.beta3 of the `beta` and `tests-passed` branches. There are no known workarounds.

Qualitor v8.24 was discovered to contain a Server-Side Request Forgery (SSRF) via the component /request/viewValidacao.php.

Plone though 5.2.4 allows SSRF via the lxml parser. This affects Diazo themes, Dexterity TTW schemas, and modeleditors in plone.app.theming, plone.app.dexterity, and plone.supermodel.

In JetBrains TeamCity before 2020.2.3, information disclosure via SSRF was possible.

blackbox_exporter v0.23.0 was discovered to contain an access control issue in its probe interface. This vulnerability allows attackers to detect intranet ports and services, as well as download resources. NOTE: this is disputed by third parties because authentication can be configured.

Jellyfin up to v10.7.7 was discovered to contain a Server-Side Request Forgery (SSRF) via the component /Repositories. This vulnerability allows attackers to access network resources and sensitive information via a crafted POST request.

Server-side request forgery (SSRF) vulnerability in feed-proxy.php in extjs 5.0.0.

DataHub is an open-source metadata platform. The DataHub frontend acts as a proxy able to forward any REST or GraphQL requests to the backend. The goal of this proxy is to perform authentication if needed and forward HTTP requests to the DataHub Metadata Store (GMS). It has been discovered that the proxy does not adequately construct the URL when forwarding data to GMS, allowing external users to reroute requests from the DataHub Frontend to any arbitrary hosts. As a result attackers may be able to reroute a request from originating from the frontend proxy to any other server and return the result. This vulnerability was discovered and reported by the GitHub Security lab and is tracked as GHSL-2022-076.

Stirling-PDF is a locally hosted web application that allows you to perform various operations on PDF files. Prior to version 0.45.0, Stirling-PDF is vulnerable to SSRF-induced arbitrary file read. WeasyPrint redefines a set of HTML tags, including img, embed, object, and others. The references to several files inside, allow the attachment of content from any webpage or local file to a PDF. This allows the attacker to read any file on the server, including sensitive files and configuration files. All users utilizing this feature will be affected. This issue has been patched in version 0.45.0.

Stimulsoft GmbH Stimulsoft Designer (Web) 2023.1.3 is vulnerable to Server Side Request Forgery (SSRF). TThe Reporting Designer (Web) offers the possibility to embed sources from external locations. If the user chooses an external location, the request to that resource is performed by the server rather than the client. Therefore, the server causes outbound traffic and potentially imports data. An attacker may also leverage this behaviour to exfiltrate data of machines on the internal network of the server hosting the Stimulsoft Reporting Designer (Web).

CData RSB Connect v22.0.8336 was discovered to contain a Server-Side Request Forgery (SSRF).

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 contains basic SSRF vulnerability. It allow unauthenticated attackers to request to any internal and external server.

RSSHub is an open source RSS feed generator. RSSHub is vulnerable to Server-Side Request Forgery (SSRF) attacks. This vulnerability allows an attacker to send arbitrary HTTP requests from the server to other servers or resources on the network. An attacker can exploit this vulnerability by sending a request to the affected routes with a malicious URL. An attacker could also use this vulnerability to send requests to internal or any other servers or resources on the network, potentially gain access to sensitive information that would not normally be accessible and amplifying the impact of the attack. The patch for this issue can be found in commit a66cbcf.

Microsoft Exchange Server Information Disclosure Vulnerability

A Server-Side Request Forgery vulnerability in DELMIA Apriso Release 2017 through Release 2022 could allow an unauthenticated attacker to issue requests to arbitrary hosts on behalf of the server running the DELMIA Apriso application.

Audiobookshelf is a self-hosted audiobook and podcast server. Prior to 2.7.0, Audiobookshelf is vulnerable to unauthenticated blind server-side request (SSRF) vulnerability in `podcastUtils.js`. This vulnerability has been addressed in version 2.7.0. There are no known workarounds for this vulnerability.

The Popup builder with Gamification, Multi-Step Popups, Page-Level Targeting, and WooCommerce Triggers plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 2.1.4. This is due to insufficient validation on the URLs supplied via the URL parameter. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services, as well as conduct network reconnaissance. The vulnerability was partially patched in version 2.1.4.

Some Dahua software products have a vulnerability of server-side request forgery (SSRF). An Attacker can access internal resources by concatenating links (URL) that conform to specific rules.

Fediverse Embeds embeds fediverse posts on WordPress sites. Prior to version 1.5.8, Fediverse Embeds registered an unauthenticated REST route ftf/media-proxy (includes/Media_Proxy.php) with permission_callback => __return_true that accepted a base64-encoded URL and forwarded it to wp_remote_get($url) without enforcing any allowlist. The plugin's source contained a comment block explicitly acknowledging that the request should be validated against allowed fediverse domains, but in 1.5.7 the validation only set a local $can_download_media flag that was never read. The full response body was echoed back to the caller, so this was a full-read SSRF / open proxy reachable by any anonymous visitor. This issue has been patched in version 1.5.8.

A Server-Side Request Forgery (SSRF) vulnerability exists in composiohq/composio version v0.4.2, specifically in the /api/actions/execute/WEBTOOL_SCRAPE_WEBSITE_CONTENT endpoint. This vulnerability allows an attacker to read files, access AWS metadata, and interact with local services on the system.

A Server-Side Request Forgery (SSRF) vulnerability exists in composiohq/composio version v0.4.4. This vulnerability allows an attacker to read the contents of any file in the system by exploiting the BROWSERTOOL_GOTO_PAGE and BROWSERTOOL_GET_PAGE_DETAILS actions.

Craftql v1.3.7 and before is vulnerable to Server-Side Request Forgery (SSRF) which allows an attacker to execute arbitrary code via the vendor/markhuot/craftql/src/Listeners/GetAssetsFieldSchema.php file

Server Side Request Forgery (SSRF) vulnerability in AdmirorFrames Joomla! extension in afGdStream.php script allows to access local files or server pages available only from localhost. This issue affects AdmirorFrames: before 5.0.

libcurl might in some circumstances reuse the wrong connection for SMB(S) transfers. libcurl features a pool of recent connections so that subsequent requests can reuse an existing connection to avoid overhead. When reusing a connection a range of criteria must be met. Due to a logical error in the code, a network transfer operation that was requested by an application could wrongfully reuse an existing SMB connection to the same server that was using a different 'share' than the new subsequent transfer should. This could in unlucky situations lead to the download of the wrong file or the upload of a file to the wrong place. When this happens, the same credentials are used and the server name is the same.

Server-Side Request Forgery (SSRF) vulnerability in pdfmake versions 0.3.0-beta.2 through 0.3.5 allows a remote attacker to obtain sensitive information via the src/URLResolver.js component. The fix was released in version 0.3.6 which introduces the setUrlAccessPolicy() method allowing server operators to define URL access rules. A warning is now logged when pdfmake is used server-side without a policy configured.

Mobile Security Framework (MobSF) is a pen-testing, malware analysis and security assessment framework capable of performing static and dynamic analysis. In versions prior to 3.9.7, the requests.get() request in the _check_url method is specified as allow_redirects=True, which allows a server-side request forgery when a request to .well-known/assetlinks.json" returns a 302 redirect. This is a bypass of the fix for CVE-2024-29190 and is fixed in 3.9.7.

The InfusedWoo Pro plugin for WordPress is vulnerable to Arbitrary File Read in all versions up to, and including, 5.1.2 via the popup_submit. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services.

Server Side Request Forgery (SSRF) vulnerability in saveUrlAs function in ImagesService.java in sunkaifei FlyCMS version 20190503.

YzmCMS v5.5 contains a server-side request forgery (SSRF) in the grab_image() function.

A Server-Side Request Forgery (SSRF) in smarts-srl.com Smart Agent v.1.1.0 allows a remote attacker to obtain sensitive information via a crafted script to the /FB/getFbVideoSource.php component.

The WP STAGING WordPress Backup Plugin WordPress plugin before 3.5.0 does not prevent users with the administrator role from pinging conducting SSRF attacks, which may be a problem in multisite configurations.

Server-Side Request Forgery (SSRF) in GitHub repository jgraph/drawio prior to 18.0.7.

Sematell ReplyOne 7.4.3.0 allows SSRF via the application server API.