In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was a potential out of bound read in _nx_secure_tls_process_clienthello() because of a missing validation of PSK length provided in the user message.

In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check in_nx_secure_tls_proc_clienthello_supported_versions_extension() in the extension version field.

In Eclipse Foundation NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_option_process() when processing an IPv4 packet with the timestamp option.

In Eclipse Foundation NextX Duo before 6.4.4, a module of ThreadX, the _nx_secure_tls_process_clienthello() function was missing length verification of certain SSL/TLS client hello message: the ciphersuite length and compression method length. In case of an attacker-crafted message with values outside of the expected range, it could cause an out-of-bound read.

In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_icmpv6_validate_options() when handling a packet with ICMP6 options.

In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() function when received an Ethernet frame with less than 4 bytes of IP packet.

In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check resulting it out by two out of bound read.

Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices.

In Eclipse Open9J versions 0.21 to 0.58, a pre-authentication remote attacker can crash JITServer by sending a 32-byte crafted TCP message.

In the Eclipse OMR compiler component, since release 0.7.0, an optimization enabled for Eclipse OpenJ9 consumers of OMR on Z processors incorrectly handles NUL (0x00) characters during the Latin-compatible charset (UTF-8, ISO8859-1, ASCII, etc) to IBM-1047/037 translation sequence. This can cause the output byte array to be truncated, discarding the first NUL byte and all subsequent characters, and thereby exposing a possible buffer over-read problem. This issue is fixed in Eclipse OMR version 0.8.0.

In Eclipse Wakaama, ever since its inception until 2021-01-14, the CoAP parsing code does not properly sanitize network-received data.

In Eclipse Openj9 before version 0.38.0, in the implementation of the shared cache (which is enabled by default in OpenJ9 builds) the size of a string is not properly checked against the size of the buffer.

In NextX Duo before 6.4.4, in the HTTP client module, the network support code for Eclipse Foundation ThreadX, the parsing of HTTP header fields was missing bounds verification. A crafted server response could cause undefined behavior.

In USBX before 6.4.3, the USB support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _ux_host_class_audio_streaming_sampling_get() when parsing a descriptor of an USB streaming device.

In USBX before 6.4.3, the USB support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _ux_host_class_audio_alternate_setting_locate() when parsing a descriptor with attacker-controlled frequency fields.

In USBX before 6.4.3, the USB support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _ux_host_class_audio10_sam_parse_func() when parsing a list of sampling frequencies.

In NextX Duo's snmp addon versions before 6.4.4, a part of the Eclipse Foundation ThreadX, an attacker could cause an out-of-bound read by a crafted SNMPv3 security parameters.

In NetXDuo version before 6.4.4, a networking support module for Eclipse Foundation ThreadX, in the DHCPV6 client there was an unchecked index extracting the server DUID from the server reply. With a crafted packet, an attacker could cause an out of memory read.

In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() when handling unicast DHCP messages that could cause corruption of 4 bytes of memory.

In USBX before 6.4.3, the USB support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _ux_host_class_audio_device_type_get() when parsing a descriptor of an USB audio device.

In Eclipse OpenJ9 release versions prior to 0.44.0 and after 0.13.0, when running with JVM option -Xgc:concurrentScavenge, the sequence generated for System.arrayCopy on the IBM Z platform with hardware and software support for guarded storage [1], could allow access to a buffer with an incorrect length value when executing an arraycopy sequence while the Concurrent Scavenge Garbage Collection cycle is active and the source and destination memory regions for arraycopy overlap. This allows read and write to addresses beyond the end of the array range.

The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.0.1 to version 2.43 fail to validate the RDATA content against the RDATA length in a DNS response when processing A6, CERT, LOC, TKEY or TSIG records, which may allow an attacker to craft a DNS response, causing a target application to crash or read uninitialized memory. These functions are for application debugging only and hence not in the path of code executed by the DNS resolver. Further, they have been deprecated since version 2.34 and should not be used by any new applications. Applications should consider porting away from these interfaces since they may be removed in future versions.

OpenBSD before commit 6a23123 (2026-06-18) contains an out-of-bounds read vulnerability in the mpls_do_error function within sys/netmpls/mpls_input.c that allows remote attackers to disclose kernel stack memory by sending crafted MPLS frames with 16 labels and no Bottom-of-Stack bit set.

A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary.

A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.x), and Q(10.0) software. There is an out-of-bounds read vulnerability in media.audio_policy. The Samsung ID is SVE-2019-16333 (February 2020).

In FreeRDP before version 2.1.2, there is an out-of-bound read in glyph_cache_put. This affects all FreeRDP clients with `+glyph-cache` option enabled This is fixed in version 2.1.2.

In PHP versions prior to 7.4.33, 8.0.25 and 8.1.12, when using imageloadfont() function in gd extension, it is possible to supply a specially crafted font file, such as if the loaded font is used with imagechar() function, the read outside allocated buffer will be used. This can lead to crashes or disclosure of confidential information. 

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: fix out of bounds memory access The problem is detected by KASAN. btrtl driver uses private hci data to store 'struct btrealtek_data'. If btrtl driver is used with btusb, then memory for private hci data is allocated in btusb. But no private data is allocated after hci_dev, when btrtl is used with hci_h5. This commit adds memory allocation for hci_h5 case. ================================================================== BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl] Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76 Hardware name: Pine64 PinePhone (1.2) (DT) Workqueue: hci0 hci_power_on [bluetooth] Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8+0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0 really_probe+0x254/0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+0x88/0x158 async_run_entry_fn+0xd0/0x388 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf+0xac/0x178 flush_to_ldisc+0x130/0x2c8 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Second to last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 ==================================================================

The hda driver is vulnerable to a buffer over-read from a guest-controlled value.

The NVMe driver function nvme_opc_get_log_page is vulnerable to a buffer over-read from a guest-controlled value.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. An out-of-bounds read was found in Exiv2 version v0.28.2. The vulnerability is in the parser for the ASF video format, which was a new feature in v0.28.0. The out-of-bounds read is triggered when Exiv2 is used to read the metadata of a crafted video file. The bug is fixed in version v0.28.3.

When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::Hello::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartRequestTableFeatures::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyTableFeatures::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyPortStats::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyGroupDesc::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::EchoCommon::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg modules). This vulnerability is associated with program routines fluid_msg::of13::TableFeaturePropActions::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::GroupStats::unpack. This issue affects libfluid: 0.1.0.

When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyPortDescription::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::QueueGetConfigReply::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyGroup::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::HelloElemVersionBitmap::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::MultipartReplyMeter::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of10::StatsReplyPort::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of10::StatsReplyQueue::unpack. This issue affects libfluid: 0.1.0.

Out-of-bounds Read vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routine fluid_msg::of13::TableFeaturePropInstruction::unpack. This issue affects libfluid: 0.1.0.