In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix array index out of bound exception Fix array index out of bound exception in fc_rport_prli_resp().

IBM Engineering Lifecycle Optimization - Publishing 7.0.2 and 7.0.3 could allow a remote attacker to cause an unhandled SSL exception which could leave the connection in an unexpected or insecure state.

In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.

In the Linux kernel, the following vulnerability has been resolved: audit: fix out-of-bounds read in audit_compare_dname_path() When a watch on dir=/ is combined with an fsnotify event for a single-character name directly under / (e.g., creating /a), an out-of-bounds read can occur in audit_compare_dname_path(). The helper parent_len() returns 1 for "/". In audit_compare_dname_path(), when parentlen equals the full path length (1), the code sets p = path + 1 and pathlen = 1 - 1 = 0. The subsequent loop then dereferences p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read. Fix this by adding a pathlen > 0 check to the while loop condition to prevent the out-of-bounds access. [PM: subject tweak, sign-off email fixes]

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix OOB read/write in network-coding decode batadv_nc_skb_decode_packet() trusts coded_len and checks only against skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing payload headroom, and the source skb length is not verified, allowing an out-of-bounds read and a small out-of-bounds write. Validate that coded_len fits within the payload area of both destination and source sk_buffs before XORing.

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels The cacheinfo sets up the shared_cpu_map by checking whether the caches with the same index are shared between CPUs. However, this will trigger slab-out-of-bounds access if the CPUs do not have the same cache hierarchy. Another problem is the mismatched shared_cpu_map when the shared cache does not have the same index between CPUs. CPU0 I D L3 index 0 1 2 x ^ ^ ^ ^ index 0 1 2 3 CPU1 I D L2 L3 This patch checks each cache is shared with all caches on other CPUs.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix potential invalid access when MAC list is empty list_first_entry() never returns NULL - if the list is empty, it still returns a pointer to an invalid object, leading to potential invalid memory access when dereferenced. Fix this by using list_first_entry_or_null instead of list_first_entry.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Fix memory allocation size for queue_priority_map Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use hdev->dump.head. However, dev_coredumpv can free the buffer. From dev_coredumpm_timeout documentation, which is used by dev_coredumpv: > Creates a new device coredump for the given device. If a previous one hasn't > been read yet, the new coredump is discarded. The data lifetime is determined > by the device coredump framework and when it is no longer needed the @free > function will be called to free the data. If the data has not been read by the userspace yet, dev_coredumpv will discard new buffer, freeing hdev->dump.head. This leads to vmalloc-out-of-bounds error when skb_put_data tries to access hdev->dump.head. A crash report from syzbot illustrates this: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in skb_put_data include/linux/skbuff.h:2752 [inline] BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258 Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844 CPU: 1 UID: 0 PID: 5844 Comm: kworker/u9:2 Not tainted 6.14.0-syzkaller-10892-g4e82c87058f4 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Workqueue: hci0 hci_devcd_timeout Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x23/0x60 mm/kasan/shadow.c:105 skb_put_data include/linux/skbuff.h:2752 [inline] hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258 hci_devcd_timeout+0xb5/0x2e0 net/bluetooth/coredump.c:413 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> The buggy address ffffc90004ed5000 belongs to a vmalloc virtual mapping Memory state around the buggy address: ffffc90004ed4f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90004ed4f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90004ed5000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90004ed5080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90004ed5100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== To avoid this issue, reorder dev_coredumpv to be called after skb_put_data that does not free the data.

In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch() The "link_id" value comes from the user via debugfs. If it's larger than BITS_PER_LONG then that would result in shift wrapping and potentially an out of bounds access later. In fact, we can limit it to IEEE80211_MLD_MAX_NUM_LINKS (15). Fortunately, only root can write to debugfs files so the security impact is minimal.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised.

In the Linux kernel, the following vulnerability has been resolved: tls: handle data disappearing from under the TLS ULP TLS expects that it owns the receive queue of the TCP socket. This cannot be guaranteed in case the reader of the TCP socket entered before the TLS ULP was installed, or uses some non-standard read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy early exit (which leaves anchor pointing to a freed skb) with real error handling. Wipe the parsing state and tell the reader to retry. We already reload the anchor every time we (re)acquire the socket lock, so the only condition we need to avoid is an out of bounds read (not having enough bytes in the socket for previously parsed record len). If some data was read from under TLS but there's enough in the queue we'll reload and decrypt what is most likely not a valid TLS record. Leading to some undefined behavior from TLS perspective (corrupting a stream? missing an alert? missing an attack?) but no kernel crash should take place.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-boundary access in devs.path - touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123 - truncate -s $((1024*1024*1024)) \ /mnt/f2fs/012345678901234567890123456789012345678901234567890123 - touch /mnt/f2fs/file - truncate -s $((1024*1024*1024)) /mnt/f2fs/file - mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \ -c /mnt/f2fs/file - mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \ /mnt/f2fs/loop [16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff [16937.192268] F2FS-fs (loop0): Failed to find devices If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may not end up w/ null character due to path array is fully filled, So accidently, fields locate after path[] may be treated as part of device path, result in parsing wrong device path. struct f2fs_dev_info { ... char path[MAX_PATH_LEN]; ... }; Let's add one byte space for sbi->devs.path[] to store null character of device path string.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: do not index invalid pin_assignments A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition.

In the Linux kernel, the following vulnerability has been resolved: regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable.

In the Linux kernel, the following vulnerability has been resolved: usb: core: config: Prevent OOB read in SS endpoint companion parsing usb_parse_ss_endpoint_companion() checks descriptor type before length, enabling a potentially odd read outside of the buffer size. Fix this up by checking the size first before looking at any of the fields in the descriptor.

In the Linux kernel, the following vulnerability has been resolved: objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() The csts_state_names[] array only has six sparse entries, but the iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a potential out-of-bounds stack read. Fix that. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc() The hfsplus_readdir() method is capable to crash by calling hfsplus_uni2asc(): [ 667.121659][ T9805] ================================================================== [ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10 [ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805 [ 667.124578][ T9805] [ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full) [ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 667.124890][ T9805] Call Trace: [ 667.124893][ T9805] <TASK> [ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0 [ 667.124911][ T9805] print_report+0xd0/0x660 [ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610 [ 667.124928][ T9805] ? __phys_addr+0xe8/0x180 [ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124942][ T9805] kasan_report+0xc6/0x100 [ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10 [ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360 [ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0 [ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10 [ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0 [ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0 [ 667.125022][ T9805] ? lock_acquire+0x30/0x80 [ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0 [ 667.125044][ T9805] ? putname+0x154/0x1a0 [ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10 [ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0 [ 667.125069][ T9805] iterate_dir+0x296/0xb20 [ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10 [ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200 [ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10 [ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0 [ 667.125143][ T9805] do_syscall_64+0xc9/0x480 [ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9 [ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48 [ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9 [ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9 [ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004 [ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110 [ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260 [ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 667.125207][ T9805] </TASK> [ 667.125210][ T9805] [ 667.145632][ T9805] Allocated by task 9805: [ 667.145991][ T9805] kasan_save_stack+0x20/0x40 [ 667.146352][ T9805] kasan_save_track+0x14/0x30 [ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0 [ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550 [ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0 [ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0 [ 667.148174][ T9805] iterate_dir+0x296/0xb20 [ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.148937][ T9805] do_syscall_64+0xc9/0x480 [ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.149809][ T9805] [ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000 [ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048 [ 667.151282][ T9805] The buggy address is located 0 bytes to the right of [ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c) [ 667.1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: venus: Fix OOB read due to missing payload bound check Currently, The event_seq_changed() handler processes a variable number of properties sent by the firmware. The number of properties is indicated by the firmware and used to iterate over the payload. However, the payload size is not being validated against the actual message length. This can lead to out-of-bounds memory access if the firmware provides a property count that exceeds the data available in the payload. Such a condition can result in kernel crashes or potential information leaks if memory beyond the buffer is accessed. Fix this by properly validating the remaining size of the payload before each property access and updating bounds accordingly as properties are parsed. This ensures that property parsing is safely bounded within the received message buffer and protects against malformed or malicious firmware behavior.

In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70

In the Linux kernel, the following vulnerability has been resolved: hfs: fix slab-out-of-bounds in hfs_bnode_read() This patch introduces is_bnode_offset_valid() method that checks the requested offset value. Also, it introduces check_and_correct_requested_length() method that checks and correct the requested length (if it is necessary). These methods are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(), hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent the access out of allocated memory and triggering the crash.

In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix stack memory use after return in raid1_reshape In the raid1_reshape function, newpool is allocated on the stack and assigned to conf->r1bio_pool. This results in conf->r1bio_pool.wait.head pointing to a stack address. Accessing this address later can lead to a kernel panic. Example access path: raid1_reshape() { // newpool is on the stack mempool_t newpool, oldpool; // initialize newpool.wait.head to stack address mempool_init(&newpool, ...); conf->r1bio_pool = newpool; } raid1_read_request() or raid1_write_request() { alloc_r1bio() { mempool_alloc() { // if pool->alloc fails remove_element() { --pool->curr_nr; } } } } mempool_free() { if (pool->curr_nr < pool->min_nr) { // pool->wait.head is a stack address // wake_up() will try to access this invalid address // which leads to a kernel panic return; wake_up(&pool->wait); } } Fix: reinit conf->r1bio_pool.wait after assigning newpool.

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.

In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7173: fix channels index for syscalib_mode Fix the index used to look up the channel when accessing the syscalib_mode attribute. The address field is a 0-based index (same as scan_index) that it used to access the channel in the ad7173_channels array throughout the driver. The channels field, on the other hand, may not match the address field depending on the channel configuration specified in the device tree and could result in an out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() syzbot reports an UBSAN issue as below: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10 index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]') CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429 get_nid fs/f2fs/node.h:381 [inline] f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093 aio_write+0x56b/0x7c0 fs/aio.c:1633 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052 __do_sys_io_submit fs/aio.c:2111 [inline] __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f238798cde9 index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long) In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero. The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue. if (dn.ofs_in_node || IS_INODE(dn.node_page)) { f2fs_truncate_data_blocks_range(&dn, count); free_from += count; } I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block. Let's add a sanity check for such condition to avoid out-of-bounds access issue.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking for bcm_op runtime updates The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via hrtimer. The content and also the length of the sequence can be changed resp reduced at runtime where the 'currframe' counter is then set to zero. Although this appeared to be a safe operation the updates of 'currframe' can be triggered from user space and hrtimer context in bcm_can_tx(). Anderson Nascimento created a proof of concept that triggered a KASAN slab-out-of-bounds read access which can be prevented with a spin_lock_bh. At the rework of bcm_can_tx() the 'count' variable has been moved into the protected section as this variable can be modified from both contexts too.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix out-of-bounds access in nvmet_enable_port When trying to enable a port that has no transport configured yet, nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports array, causing an out-of-bounds access: [ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da [ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632 [...] [ 106.076026] nvmet: transport type 255 not supported Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by nvmet_ports_make(). Avoid this by checking for NVMF_TRTYPE_MAX before proceeding.

An issue was discovered in xenvif_set_hash_mapping in drivers/net/xen-netback/hash.c in the Linux kernel through 4.18.1, as used in Xen through 4.11.x and other products. The Linux netback driver allows frontends to control mapping of requests to request queues. When processing a request to set or change this mapping, some input validation (e.g., for an integer overflow) was missing or flawed, leading to OOB access in hash handling. A malicious or buggy frontend may cause the (usually privileged) backend to make out of bounds memory accesses, potentially resulting in one or more of privilege escalation, Denial of Service (DoS), or information leaks.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse() Update struct hid_descriptor to better reflect the mandatory and optional parts of the HID Descriptor as per USB HID 1.11 specification. Note: the kernel currently does not parse any optional HID class descriptors, only the mandatory report descriptor. Update all references to member element desc[0] to rpt_desc. Add test to verify bLength and bNumDescriptors values are valid. Replace the for loop with direct access to the mandatory HID class descriptor member for the report descriptor. This eliminates the possibility of getting an out-of-bounds fault. Add a warning message if the HID descriptor contains any unsupported optional HID class descriptors.

In the Linux kernel, the following vulnerability has been resolved: isofs: Prevent the use of too small fid syzbot reported a slab-out-of-bounds Read in isofs_fh_to_parent. [1] The handle_bytes value passed in by the reproducing program is equal to 12. In handle_to_path(), only 12 bytes of memory are allocated for the structure file_handle->f_handle member, which causes an out-of-bounds access when accessing the member parent_block of the structure isofs_fid in isofs, because accessing parent_block requires at least 16 bytes of f_handle. Here, fh_len is used to indirectly confirm that the value of handle_bytes is greater than 3 before accessing parent_block. [1] BUG: KASAN: slab-out-of-bounds in isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183 Read of size 4 at addr ffff0000cc030d94 by task syz-executor215/6466 CPU: 1 UID: 0 PID: 6466 Comm: syz-executor215 Not tainted 6.14.0-rc7-syzkaller-ga2392f333575 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0x198/0x550 mm/kasan/report.c:521 kasan_report+0xd8/0x138 mm/kasan/report.c:634 __asan_report_load4_noabort+0x20/0x2c mm/kasan/report_generic.c:380 isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183 exportfs_decode_fh_raw+0x2dc/0x608 fs/exportfs/expfs.c:523 do_handle_to_path+0xa0/0x198 fs/fhandle.c:257 handle_to_path fs/fhandle.c:385 [inline] do_handle_open+0x8cc/0xb8c fs/fhandle.c:403 __do_sys_open_by_handle_at fs/fhandle.c:443 [inline] __se_sys_open_by_handle_at fs/fhandle.c:434 [inline] __arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Allocated by task 6466: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x40/0x50 mm/kasan/generic.c:562 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xac/0xc4 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4294 [inline] __kmalloc_noprof+0x32c/0x54c mm/slub.c:4306 kmalloc_noprof include/linux/slab.h:905 [inline] handle_to_path fs/fhandle.c:357 [inline] do_handle_open+0x5a4/0xb8c fs/fhandle.c:403 __do_sys_open_by_handle_at fs/fhandle.c:443 [inline] __se_sys_open_by_handle_at fs/fhandle.c:434 [inline] __arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_pciefd: refine error prone echo_skb_max handling logic echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid access to memory In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: add check to avoid out of bound access There is a possibility that init_codecs is invoked multiple times during manipulated payload from video firmware. In such case, if codecs_count can get incremented to value more than MAX_CODEC_NUM, there can be OOB access. Reset the count so that it always starts from beginning.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 ---truncated---

Flash Player versions 31.0.0.122 and earlier have an out-of-bounds read vulnerability. Successful exploitation could lead to information disclosure.

Leptonica before 1.80.0 allows a heap-based buffer over-read in rasteropGeneralLow, related to adaptmap_reg.c and adaptmap.c.

In the Linux kernel, the following vulnerability has been resolved: can: ucan: fix out of bound read in strscpy() source Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()") unintentionally introduced a one byte out of bound read on strscpy()'s source argument (which is kind of ironic knowing that strscpy() is meant to be a more secure alternative :)). Let's consider below buffers: dest[len + 1]; /* will be NUL terminated */ src[len]; /* may not be NUL terminated */ When doing: strncpy(dest, src, len); dest[len] = '\0'; strncpy() will read up to len bytes from src. On the other hand: strscpy(dest, src, len + 1); will read up to len + 1 bytes from src, that is to say, an out of bound read of one byte will occur on src if it is not NUL terminated. Note that the src[len] byte is never copied, but strscpy() still needs to read it to check whether a truncation occurred or not. This exact pattern happened in ucan. The root cause is that the source is not NUL terminated. Instead of doing a copy in a local buffer, directly NUL terminate it as soon as usb_control_msg() returns. With this, the local firmware_str[] variable can be removed. On top of this do a couple refactors: - ucan_ctl_payload->raw is only used for the firmware string, so rename it to ucan_ctl_payload->fw_str and change its type from u8 to char. - ucan_device_request_in() is only used to retrieve the firmware string, so rename it to ucan_get_fw_str() and refactor it to make it directly handle all the string termination logic.

In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate l_tree_depth to avoid out-of-bounds access The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is limited to OCFS2_MAX_PATH_DEPTH. Add a check to prevent out-of-bounds access if l_tree_depth has an invalid value, which may occur when reading from a corrupted mounted disk [1].

In the Linux kernel, the following vulnerability has been resolved: md/raid10: check slab-out-of-bounds in md_bitmap_get_counter If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage() will return -EINVAL because 'page >= bitmap->pages', but the return value was not checked immediately in md_bitmap_get_counter() in order to set *blocks value and slab-out-of-bounds occurs. Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and return directly if true.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Use number of bits to manage bitmap sizes To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using byte as unit. However, bitmap helper functions assume that bitmaps are allocated using unsigned long as unit. This gap causes memory access beyond the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG was observed at firmware download to eHBA-9600. Call trace indicated that the out-of-bounds access happened in find_first_zero_bit() called from mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap. To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use number of bits, and call bitmap helper functions which take number of bits as arguments. For memory allocation, call bitmap_zalloc() instead of kzalloc() and krealloc(). For memory free, call bitmap_free() instead of kfree(). For zero clear, call bitmap_clear() instead of memset(). Remove three fields for bitmap byte sizes in struct scmd_priv which are no longer required. Replace the field dev_handle_bitmap_sz with dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across resize.

In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential array out of bounds access Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying key_len size in iwl_mvm_sec_key_add().

In the Linux kernel, the following vulnerability has been resolved: drm/i915/perf: add sentinel to xehp_oa_b_counters Arrays passed to reg_in_range_table should end with empty record. The patch solves KASAN detected bug with signature: BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Read of size 4 at addr ffffffffa1555d90 by task perf/1518 CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1 Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 Call Trace: <TASK> ... xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] (cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix global-out-of-bounds To loop a variable-length array, hci_init_stage_sync(stage) considers that stage[i] is valid as long as stage[i-1].func is valid. Thus, the last element of stage[].func should be intentionally invalid as hci_init0[], le_init2[], and others did. However, amp_init1[] and amp_init2[] have no invalid element, letting hci_init_stage_sync() keep accessing amp_init1[] over its valid range. This patch fixes this by adding {} in the last of amp_init1[] and amp_init2[]. ================================================================== BUG: KASAN: global-out-of-bounds in hci_dev_open_sync ( /v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032 CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04 Workqueue: hci1 hci_power_on Call Trace: <TASK> dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1)) print_report (/v6.2-bzimage/mm/kasan/report.c:307 /v6.2-bzimage/mm/kasan/report.c:417) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) kasan_report (/v6.2-bzimage/mm/kasan/report.c:184 /v6.2-bzimage/mm/kasan/report.c:519) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) ? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635) ? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190 /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443 /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781 /v6.2-bzimage/kernel/locking/mutex.c:171 /v6.2-bzimage/kernel/locking/mutex.c:285) ? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282) hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485 /v6.2-bzimage/net/bluetooth/hci_core.c:984) ? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969) ? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85) ? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62 /v6.2-bzimage/lib/string.c:161) process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294) worker_thread (/v6.2-bzimage/./include/linux/list.h:292 /v6.2-bzimage/kernel/workqueue.c:2437) ? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379) kthread (/v6.2-bzimage/kernel/kthread.c:376) ? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331) ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314) </TASK> The buggy address belongs to the variable: amp_init1+0x30/0x60 The buggy address belongs to the physical page: page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00 >ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 ---truncated---