When IPSec is configured on a Virtual Server, undisclosed traffic can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.
The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when GraphQL Subscriptions are enabled. It can be triggered when **all of the following conditions are met**: 1. Running Apollo Router v1.28.0, v1.28.1 or v1.29.0 ("impacted versions"); **and** 2. The Supergraph schema provided to the Router (either via Apollo Uplink or explicitly via other configuration) **has a `subscription` type** with root-fields defined; **and** 3. The YAML configuration provided to the Router **has subscriptions enabled** (they are _disabled_ by default), either by setting `enabled: true` _or_ by setting a valid `mode` within the `subscriptions` object (as seen in [subscriptions' documentation](https://www.apollographql.com/docs/router/executing-operations/subscription-support/#router-setup)); **and** 4. An [anonymous](https://spec.graphql.org/draft/#sec-Anonymous-Operation-Definitions) (i.e., un-named) `subscription` operation (e.g., `subscription { ... }`) is received by the Router If **all four** of these criteria are met, the impacted versions will panic and terminate. There is no data-privacy risk or sensitive-information exposure aspect to this vulnerability. This is fixed in Apollo Router v1.29.1. Users are advised to upgrade. Updating to v1.29.1 should be a clear and simple upgrade path for those running impacted versions. However, if Subscriptions are **not** necessary for your Graph – but are enabled via configuration — then disabling subscriptions is another option to mitigate the risk.
An uncaught exception issue discovered in Softing OPC UA C++ SDK before 6.30 for Windows operating system may cause the application to crash when the server wants to send an error packet, while socket is blocked on writing.
http-swagger is an open source wrapper to automatically generate RESTful API documentation with Swagger 2.0. In versions of http-swagger prior to 1.2.6 an attacker may perform a denial of service attack consisting of memory exhaustion on the host system. The cause of the memory exhaustion is down to improper handling of http methods. Users are advised to upgrade. Users unable to upgrade may to restrict the path prefix to the "GET" method as a workaround.
An attacker can craft and send an OpenNamespace message to port 4241 with valid session-id that triggers an unhandled exception in CFTLDManager::HandleRequest function in RnaDaSvr.dll, resulting in process termination. Observed in FactoryTalk Linx 6.11. All versions of FactoryTalk Linx are affected.
Reactor Netty HttpServer, versions 0.9.3 and 0.9.4, is exposed to a URISyntaxException that causes the connection to be closed prematurely instead of producing a 400 response.
An unauthenticated remote attacker can send data to RsvcHost.exe listening on TCP port 5241 to add entries in the FactoryTalk Diagnostics event log. The attacker can specify long fields in the log entry, which can cause an unhandled exception in wcscpy_s() if a local user opens FactoryTalk Diagnostics Viewer (FTDiagViewer.exe) to view the log entry. Observed in FactoryTalk Diagnostics 6.11. All versions of FactoryTalk Diagnostics are affected.
The restify-paginate package 0.0.5 for Node.js allows remote attackers to cause a Denial-of-Service by omitting the HTTP Host header. A Restify-based web service would crash with an uncaught exception.
A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device.
An uncaught exception vulnerability exists in Control ID IDSecure 4.7.26.0 and prior, allowing attackers to cause the main web server of IDSecure to fault and crash, causing a denial of service.
A flaw was found in darkhttpd. Invalid error handling allows remote attackers to cause denial-of-service by accessing a file with a large modification date. The highest threat from this vulnerability is to system availability.
An issue was discovered in Zammad 3.0 through 3.2. The WebSocket server crashes when messages in non-JSON format are sent by an attacker. The message format is not properly checked and parsing errors not handled. This leads to a crash of the service process.
The XMLTooling library all versions prior to V3.0.4, provided with the OpenSAML and Shibboleth Service Provider software, contains an XML parsing class. Invalid data in the XML declaration causes an exception of a type that was not handled properly in the parser class and propagates an unexpected exception type.
In a rare scenario, Check Point R80.30 Security Gateway before JHF Take 50 managed by Check Point R80.30 Management crashes with a unique configuration of enhanced logging.
An issue was discovered in 3S-Smart CODESYS before 3.5.15.0 . Crafted network packets cause the Control Runtime to crash.
A CWE-248: Uncaught Exception vulnerability exists Modicon M580 (firmware version prior to V2.90), Modicon M340 (firmware version prior to V3.10), Modicon Premium (all versions), and Modicon Quantum (all versions), which could cause a possible denial of service when reading specific coils and registers in the controller over Modbus.
A CWE-248: Uncaught Exception vulnerability exists in Modicon M580 (firmware versions prior to V2.90), Modicon M340 (firmware versions prior to V3.10), Modicon Premium (all versions), Modicon Quantum (all versions), which could cause a possible denial of service when reading invalid data from the controller.
A vulnerability has been identified in SIMATIC CP 443-1 OPC UA (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V2.7), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI Comfort Panels 4" - 22" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Upd 4), SIMATIC IPC DiagMonitor (All versions < V5.1.3), SIMATIC NET PC Software V13 (All versions), SIMATIC NET PC Software V14 (All versions < V14 SP1 Update 14), SIMATIC NET PC Software V15 (All versions), SIMATIC RF188C (All versions < V1.1.0), SIMATIC RF600R family (All versions < V3.2.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.5 < V2.6.1), SIMATIC S7-1500 Software Controller (All versions between V2.5 (including) and V2.7 (excluding)), SIMATIC WinCC OA (All versions < V3.15 P018), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Upd 4), SINEC NMS (All versions < V1.0 SP1), SINEMA Server (All versions < V14 SP2), SINUMERIK OPC UA Server (All versions < V2.1), TeleControl Server Basic (All versions < V3.1.1). Specially crafted network packets sent to affected devices on port 4840/tcp could allow an unauthenticated remote attacker to cause a denial of service condition of the OPC communication or crash the device. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the OPC communication.
Legacy C++ Facebook Thrift servers (using cpp instead of cpp2) would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.05.06.00.
Python Facebook Thrift servers would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.02.18.00.
Java Facebook Thrift servers would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.02.18.00.
selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.
An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on MX Series allows an unauthenticated network-based attacker to send specific packets to an Aggregated Multiservices (AMS) interface on the device, causing the packet forwarding engine (PFE) to crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue is only triggered by packets destined to a local-interface via a service-interface (AMS). AMS is only supported on the MS-MPC, MS-MIC, and MX-SPC3 cards. This issue is not experienced on other types of interfaces or configurations. Additionally, transit traffic does not trigger this issue. This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S12; 20.2 versions prior to 20.2R3-S8; 20.4 versions prior to 20.4R3-S7; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S5; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S2; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2-S1, 22.3R3; 22.4 versions prior to 22.4R1-S2, 22.4R2.
Synapse is an open-source Matrix homeserver written and maintained by the Matrix.org Foundation. The Matrix specification specifies a list of [event authorization rules](https://spec.matrix.org/v1.2/rooms/v9/#authorization-rules) which must be checked when determining if an event should be accepted into a room. In versions of Synapse up to and including version 1.61.0, some of these rules are not correctly applied. An attacker could craft events which would be accepted by Synapse but not a spec-conformant server, potentially causing divergence in the room state between servers. Administrators of homeservers with federation enabled are advised to upgrade to version 1.62.0 or higher. Federation can be disabled by setting [`federation_domain_whitelist`](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#federation_domain_whitelist) to an empty list (`[]`) as a workaround.
In Progress MOVEit Transfer before 2021.0.9 (13.0.9), 2021.1.7 (13.1.7), 2022.0.7 (14.0.7), 2022.1.8 (14.1.8), and 2023.0.4 (15.0.4), it is possible for an attacker to invoke a method that results in an unhandled exception. Triggering this workflow can cause the MOVEit Transfer application to terminate unexpectedly.
mwlib 0.13 through 0.13.4 has a denial of service vulnerability when parsing #iferror magic functions
Advantech WebAccess/HMI Designer 2.1.9.31 has Exception Handler Chain corruption starting at Unknown Symbol @ 0x0000000000000000 called from ntdll!RtlRaiseStatus+0x00000000000000b4.
AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the mobility application (org.onosproject.mobility), the host event listener does not handle the following event types: HOST_ADDED, HOST_REMOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.
Unbound before 1.9.4 accesses uninitialized memory, which allows remote attackers to trigger a crash via a crafted NOTIFY query. The source IP address of the query must match an access-control rule.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the virtual broadband network gateway application (org.onosproject.virtualbng), the host event listener does not handle the following event types: HOST_MOVED, HOST_REMOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the Ethernet VPN application (org.onosproject.evpnopenflow), the host event listener does not handle the following event types: HOST_MOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the access control application (org.onosproject.acl), the host event listener does not handle the following event types: HOST_REMOVED. In combination with other applications, this could lead to the absence of intended code execution.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the P4 tutorial application (org.onosproject.p4tutorial), the host event listener does not handle the following event types: HOST_MOVED, HOST_REMOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.
An issue was discovered in Open Network Operating System (ONOS) 1.14. In the virtual tenant network application (org.onosproject.vtn), the host event listener does not handle the following event types: HOST_MOVED. In combination with other applications, this could lead to the absence of intended code execution.
A vulnerability in the call-handling functionality of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete error handling when XML data within a SIP packet is parsed. An attacker could exploit this vulnerability by sending a SIP packet that contains a malicious XML payload to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition.
An error-handling flaw was found in python-ecdsa before version 0.13.3. During signature decoding, malformed DER signatures could raise unexpected exceptions (or no exceptions at all), which could lead to a denial of service.
In Eclipse Mosquitto up to version 2.0.18a, an attacker can achieve memory leaking, segmentation fault or heap-use-after-free by sending specific sequences of "CONNECT", "DISCONNECT", "SUBSCRIBE", "UNSUBSCRIBE" and "PUBLISH" packets.
Improper Handling of Exceptional Conditions vulnerability in the WatchGuard Single Sign-On Client on Windows causes the client to crash while handling malformed commands. An attacker with network access to the client could create a denial of service condition for the Single Sign-On service by repeatedly issuing malformed commands. This issue affects Single Sign-On Client: through 12.7.
In Mitsubishi Electric MELSEC-Q series Ethernet module QJ71E71-100 serial number 20121 and prior, an attacker could send crafted TCP packets against the FTP service, forcing the target devices to enter an error mode and cause a denial-of-service condition.
A flaw was found in the Ceph RGW configuration with Beast as the front end handling client requests. An unauthenticated attacker could crash the Ceph RGW server by sending valid HTTP headers and terminating the connection, resulting in a remote denial of service for Ceph RGW clients.
The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.
In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.
SSL-Proxy feature on SRX devices fails to handle a hardware resource limitation which can be exploited by remote SSL/TLS servers to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition. For this issue to occur, clients protected by the SRX device must initiate a connection to the malicious server. This issue affects: Juniper Networks Junos OS on SRX5000 Series: 12.3X48 versions prior to 12.3X48-D85; 15.1X49 versions prior to 15.1X49-D180; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.
A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum and Modicon Premium which could cause a possible Denial of Service due to improper data integrity check when sending files the controller over Modbus.
An issue was discovered on Samsung mobile devices with M(6.x) and N(7.x) software. Telecom has a System Crash via abnormal exception handling. The Samsung ID is SVE-2017-10906 (January 2018).
An issue was discovered on Samsung mobile devices with N(7.x) software. An attacker can cause a reboot because InputMethodManagerService has an unprotected system service. The Samsung ID is SVE-2017-9995 (January 2018).
On BIG-IP AFM version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.5, and 13.1.x beginning in 13.1.3.4, when a virtual server is configured with both HTTP protocol security and HTTP Proxy Connect profiles, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcm_sdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.