A memory corruption vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker to trigger a Denial of Service (DoS) condition in the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. This vulnerability affects Fireware OS 12.6.1 up to and including 12.11.4 and 2025.1 up to and including 2025.1.2.

In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.

In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.

React Router is a router for React. Starting in version 7.2.0 and prior to version 7.5.2, it is possible to force an application to switch to SPA mode by adding a header to the request. If the application uses SSR and is forced to switch to SPA, this causes an error that completely corrupts the page. If a cache system is in place, this allows the response containing the error to be cached, resulting in a cache poisoning that strongly impacts the availability of the application. This issue has been patched in version 7.5.2.

An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum and Modicon Premium which could cause a possible Denial of Service due to improper data integrity check when sending files the controller over Modbus.

Improper Handling of Exceptional Conditions, Improper Check for Unusual or Exceptional Conditions vulnerability in the ABB SPIET800 and PNI800 module that allows an attacker to cause the denial of service or make the module unresponsive.

An issue was discovered on Samsung mobile devices with N(7.x) software. An attacker can cause a reboot because InputMethodManagerService has an unprotected system service. The Samsung ID is SVE-2017-9995 (January 2018).

When Routinator encounters a file via RRDP using a specifically crafted Document Type Definition, Routinator crashes.

There is a Uncaught Exception vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to remote Denial of Service.

An Improper Handling of Exceptional Conditions vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an attacker to inject a specific BGP update, causing the routing protocol daemon (RPD) to crash and restart, leading to a Denial of Service (DoS). Continued receipt and processing of the BGP update will create a sustained Denial of Service (DoS) condition. This issue affects very specific versions of Juniper Networks Junos OS: 19.3R3-S2; 19.4R3-S3; 20.2 versions 20.2R2-S3 and later, prior to 20.2R3-S2; 20.3 versions 20.3R2 and later, prior to 20.3R3; 20.4 versions 20.4R2 and later, prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS 20.1 is not affected by this issue. This issue also affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO, 20.4R3-EVO; 21.1-EVO versions prior to 21.1R2-EVO; 21.2-EVO versions prior to 21.2R2-EVO.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

There is a denial of service vulnerability in some ZTE mobile internet products. Due to insufficient validation of Web interface parameter, an attacker could use the vulnerability to perform a denial of service attack.

On the affected platforms running EOS, a malformed DHCP packet might cause the DHCP relay agent to restart.

In CODESYS V2 Runtime Toolkit 32 Bit full and PLCWinNT prior to versions V2.4.7.56 unauthenticated crafted invalid requests may result in several denial-of-service conditions. Running PLC programs may be stopped, memory may be leaked, or further communication clients may be blocked from accessing the PLC.

All versions of the CODESYS V3 Runtime Toolkit for VxWorks from version V3.5.8.0 and before version V3.5.17.10 have Improper Handling of Exceptional Conditions.

A vulnerability in class-of-service (CoS) queue management in Juniper Networks Junos OS on the ACX2K Series devices allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). Specific packets are being incorrectly routed to a queue used for other high-priority traffic such as BGP, PIM, ICMP, ICMPV6 ND and ISAKMP. Due to this misclassification of traffic, receipt of a high rate of these specific packets will cause delays in the processing of other traffic, leading to a Denial of Service (DoS). Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on ACX2K Series: All versions prior to 19.4R3-S9; All 20.2 versions; 20.3 versions prior to 20.3R3-S6 on ACX2K Series; 20.4 versions prior to 20.4R3-S4 on ACX2K Series; All 21.1 versions; 21.2 versions prior to 21.2R3-S3 on ACX2K Series. Note: This issues affects legacy ACX2K Series PPC-based devices. This platform reached Last Supported Version (LSV) as of the Junos OS 21.2 Release.

In wlan firmware, there is possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07664720; Issue ID: ALPS07664720.

Improper handling of exceptional conditions in SuiteLink server while processing command 0x01

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when GraphQL Subscriptions are enabled. It can be triggered when **all of the following conditions are met**: 1. Running Apollo Router v1.28.0, v1.28.1 or v1.29.0 ("impacted versions"); **and** 2. The Supergraph schema provided to the Router (either via Apollo Uplink or explicitly via other configuration) **has a `subscription` type** with root-fields defined; **and** 3. The YAML configuration provided to the Router **has subscriptions enabled** (they are _disabled_ by default), either by setting `enabled: true` _or_ by setting a valid `mode` within the `subscriptions` object (as seen in [subscriptions' documentation](https://www.apollographql.com/docs/router/executing-operations/subscription-support/#router-setup)); **and** 4. An [anonymous](https://spec.graphql.org/draft/#sec-Anonymous-Operation-Definitions) (i.e., un-named) `subscription` operation (e.g., `subscription { ... }`) is received by the Router If **all four** of these criteria are met, the impacted versions will panic and terminate. There is no data-privacy risk or sensitive-information exposure aspect to this vulnerability. This is fixed in Apollo Router v1.29.1. Users are advised to upgrade. Updating to v1.29.1 should be a clear and simple upgrade path for those running impacted versions. However, if Subscriptions are **not** necessary for your Graph – but are enabled via configuration — then disabling subscriptions is another option to mitigate the risk.

An improper handling of exceptional conditions vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to send specifically crafted traffic to a GlobalProtect interface that causes the service to stop responding. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.21; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h4; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h3; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8-h4; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers are not impacted by this issue.

Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability.

http-swagger is an open source wrapper to automatically generate RESTful API documentation with Swagger 2.0. In versions of http-swagger prior to 1.2.6 an attacker may perform a denial of service attack consisting of memory exhaustion on the host system. The cause of the memory exhaustion is down to improper handling of http methods. Users are advised to upgrade. Users unable to upgrade may to restrict the path prefix to the "GET" method as a workaround.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

Yet Another UserAgent Analyzer (Yauaa) is a java library that tries to parse and analyze the useragent string and extract as many relevant attributes as possible. Applications using the Client Hints analysis feature introduced with 7.0.0 can crash because the Yauaa library throws an ArrayIndexOutOfBoundsException. If uncaught the exception will result in a program crash. Applications that do not use this feature are not affected. Users are advised to upgrade to version 7.9.0. Users unable to upgrade may catch and discard any ArrayIndexOutOfBoundsException thrown by the Yauaa library.

An Improper Handling of Exceptional Conditions vulnerability in the rpd-server of Juniper Networks Junos OS and Junos OS Evolved within cRPD allows an unauthenticated network-based attacker sending crafted TCP traffic to the routing engine (RE) to cause a CPU-based Denial of Service (DoS). If specially crafted TCP traffic is received by the control plane, or a TCP session terminates unexpectedly, it will cause increased control plane CPU utilization by the rpd-server process. While not explicitly required, the impact is more severe when RIB sharding is enabled. Task accounting shows unexpected reads by the RPD Server jobs for shards: user@junos> show task accounting detail ... read:RPD Server.0.0.0.0+780.192.168.0.78+48886 TOT:00000003.00379787 MAX:00000000.00080516 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49144 TOT:00000004.00007565 MAX:00000000.00080360 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49694 TOT:00000003.00600584 MAX:00000000.00080463 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+50246 TOT:00000004.00346998 MAX:00000000.00080338 RUNS: 233888\ This issue affects: Junos OS with cRPD:  * All versions before 21.2R3-S8,  * 21.4 before 21.4R3-S7,  * 22.1 before 22.1R3-S6,  * 22.2 before 22.2R3-S4,  * 22.3 before 22.3R3-S3,  * 22.4 before 22.4R3-S2,  * 23.2 before 23.2R2-S2,  * 24.2 before 24.2R2;  Junos OS Evolved with cRPD:  * All versions before 21.4R3-S7-EVO,  * 22.2 before 22.2R3-S4-EVO,  * 22.3 before 22.3R3-S3-EVO,  * 22.4 before 22.4R3-S2-EVO,  * 23.2 before 23.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specific BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established.  Systems without BGP traceoptions enabled are not affected by this issue. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8,  * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S3,  * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R2;  Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * from 21.4-EVO before 21.4R3-S8-EVO,  * from 22.2-EVO before 22.2R3-S4-EVO,  * from 22.3-EVO before 22.3R3-S4-EVO, * from 22.4-EVO before 22.4R3-S3-EVO,  * from 23.2-EVO before 23.2R2-S1-EVO,  * from 23.4-EVO before 23.4R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.

An improper handling of exceptional conditions vulnerability exists in the Palo Alto Networks PAN-OS dataplane that enables an unauthenticated network-based attacker to send specifically crafted traffic through the firewall that causes the service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.9; PAN-OS 10.0 versions earlier than PAN-OS 10.0.5. This issue does not affect Prisma Access.

A vulnerability in Apache Tomcat allows an attacker to remotely trigger a denial of service. An error introduced as part of a change to improve error handling during non-blocking I/O meant that the error flag associated with the Request object was not reset between requests. This meant that once a non-blocking I/O error occurred, all future requests handled by that request object would fail. Users were able to trigger non-blocking I/O errors, e.g. by dropping a connection, thereby creating the possibility of triggering a DoS. Applications that do not use non-blocking I/O are not exposed to this vulnerability. This issue affects Apache Tomcat 10.0.3 to 10.0.4; 9.0.44; 8.5.64.

When an attacker sends a specific crafted Ethernet Operation, Administration, and Maintenance (Ethernet OAM) packet to a target device, it may improperly handle the incoming malformed data and fail to sanitize this incoming data resulting in an overflow condition. This overflow condition in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) condition by coring the CFM daemon. Continued receipt of these packets may cause an extended Denial of Service condition. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 14.1X50 versions prior to 14.1X50-D145; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R2; 15.1X49 versions prior to 15.1X49-D170 on SRX Series; 15.1X53 versions prior to 15.1X53-D67.

Cpanel::JSON::XS versions before 4.41 for Perl allow denial of service via UTF-8 BOM prefixed input when a decode filter callback throws. To skip a leading 3-byte UTF-8 BOM, decode_json() advances the input scalar's string pointer past the mark with SvPV_set() and restores it only on the normal return path. When decoding aborts through a Perl exception, for example a filter_json_object callback that croaks, the restore is skipped and the scalar is left with its string pointer offset into its own buffer and a shortened length. When that scalar is later freed, the allocator receives an invalid pointer and the interpreter aborts. A single BOM prefixed document decoded with a throwing filter callback crashes any caller.

An issue was discovered on Samsung mobile devices with L(5.0/5.1), M(6.0), and N(7.x) software. Intents related to Wi-Fi have incorrect exception handling, leading to a crash of system processes. The Samsung ID is SVE-2017-8389 (May 2017).

An issue was discovered on Samsung mobile devices with N(7.x) software. Because of missing Intent exception handling, system_server can have a NullPointerException with a crash of a system process. The Samsung IDs are SVE-2017-9122, SVE-2017-9123, SVE-2017-9124, and SVE-2017-9126 (July 2017).

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.0) software. Because of incorrect exception handling and an unprotected intent, AudioService can cause a system crash, The Samsung IDs are SVE-2017-8114, SVE-2017-8116, and SVE-2017-8117 (March 2017).

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) software. android.intent.action.SIOP_LEVEL_CHANGED allows a serializable intent reboot. The Samsung ID is SVE-2017-8363 (May 2017).

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.x) software. An attacker can crash system processes via a Serializable object because of missing exception handling. The Samsung IDs are SVE-2017-8109, SVE-2017-8110, SVE-2017-8115, SVE-2017-8118, and SVE-2017-8119 (April 2017).

Improper input validation in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) via inputting negative values into the oneflow.zeros/ones parameter.

A release of illegal memory vulnerability in the snmpd daemon of Juniper Networks Junos OS, Junos OS Evolved allows an attacker to halt the snmpd daemon causing a sustained Denial of Service (DoS) to the service until it is manually restarted. This issue impacts any version of SNMP – v1,v2, v3 This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S20; 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2. Juniper Networks Junos OS Evolved 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO.

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) software. BootReceiver allows attackers to trigger a system crash because of incorrect exception handling. The Samsung ID is SVE-2016-7118 (December 2016).

On BIG-IP AFM version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.5, and 13.1.x beginning in 13.1.3.4, when a virtual server is configured with both HTTP protocol security and HTTP Proxy Connect profiles, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

The adapter @hono/node-server allows you to run your Hono application on Node.js. Prior to 1.10.1, the application hangs when receiving a Host header with a value that `@hono/node-server` can't handle well. Invalid values are those that cannot be parsed by the `URL` as a hostname such as an empty string, slashes `/`, and other strings. The version 1.10.1 includes the fix for this issue.

A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcm_sdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

Engine.IO is the implementation of transport-based cross-browser/cross-device bi-directional communication layer for Socket.IO. A specially crafted HTTP request can trigger an uncaught exception on the Engine.IO server, thus killing the Node.js process. This impacts all the users of the `engine.io` package starting from version `4.0.0`, including those who uses depending packages like `socket.io`. Versions prior to `4.0.0` are not impacted. A fix has been released for each major branch, namely `4.1.2` for the `4.x.x` branch, `5.2.1` for the `5.x.x` branch, and `6.1.1` for the `6.x.x` branch. There is no known workaround except upgrading to a safe version.

A vulnerability in the processing of malformed Common Industrial Protocol (CIP) packets that are sent to Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation during processing of CIP packets. An attacker could exploit this vulnerability by sending a malformed CIP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition.