GE UR firmware versions prior to version 8.1x web server interface is supported on UR over HTTP protocol. It allows sensitive information exposure without authentication.

Vatilon v1.12.37-20240124 was discovered to transmit user credentials in plaintext.

Waveshare RS232/485 TO WIFI ETH (B) Serial to Ethernet/Wi-Fi Gateway Firmware V3.1.1.0: HW 4.3.2.1: Webpage V7.04T.07.002880.0301 was discovered to transmit Administrator credentials in plaintext.

DVP-12SE - Modbus/TCP Cleartext Transmission of Sensitive Information

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts HTTP network traffic between a user and the device.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION7700/73xx, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts Telnet network traffic between a user and the device.

In JetBrains IntelliJ IDEA before 2025.2 credentials disclosure was possible via remote reference

In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords.

Wrongthink peer-to-peer, end-to-end encrypted messenger with PeerJS and Axolotl ratchet. In wrongthink from version 2.0.0 and before 2.3.0 there was a set of vulnerabilities causing inadequate encryption strength. Part of the secret identity key was disclosed by the fingerprint used for connection. Additionally, the safety number was improperly calculated. It was computed using part of one of the public identity keys instead of being derived from both public identity keys. This caused issues in computing safety numbers which would potentially be exploitable in the real world. Additionally there was inadequate encryption strength due to use of 1024-bit DSA keys. These issues are all fixed in version 2.3.0.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains an security flaw in the web interface. HTTPS is not enabled on the device by default. This results in cleartext transmission of sensitive information such as passwords.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.

The Sante PACS Server Web Portal sends credential information without encryption.

Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2025.5.0, The iOS companion app ignores the SSID allowlist for internal networks. The app uses SSID to detect when to use the internal URL, but whenever the app cannot find any other URL to be used, it fallbacks to the internal URL as well, which can expose user's token when connected to a not secure network. This vulnerability is fixed in 2025.5.0.

In certain cases, SNI could have been sent unencrypted even when encrypted DNS was enabled. This vulnerability was fixed in Firefox 139 and Thunderbird 139.

In the JetBrains Scala plugin before 2019.2.1, some artefact dependencies were resolved over unencrypted connections.

Grand MA 300 allows retrieval of the access PIN from sniffed data.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists which could leak sensitive information transmitted between the software and the Modicon M218, M241, M251, and M258 controllers.

On BIG-IP ASM 11.6.1-11.6.5.1, under certain configurations, the BIG-IP system sends data plane traffic to back-end servers unencrypted, even when a Server SSL profile is applied.

IBM API Connect V10 is impacted by insecure communications during database replication. As the data replication happens over insecure communication channels, an attacker can view unencrypted data leading to a loss of confidentiality.

The server supports authentication methods in which credentials are sent in plaintext over unencrypted channels. If an attacker were to intercept traffic between a client and this server, the credentials would be exposed.

When using the Azure backend with a shared access signature (SAS), Terraform versions prior to 0.12.17 may transmit the token and state snapshot using cleartext HTTP.

In KeePass 2.x before 2.54, it is possible to recover the cleartext master password from a memory dump, even when a workspace is locked or no longer running. The memory dump can be a KeePass process dump, swap file (pagefile.sys), hibernation file (hiberfil.sys), or RAM dump of the entire system. The first character cannot be recovered. In 2.54, there is different API usage and/or random string insertion for mitigation.

OKI C5510MFP Printer CU H2.15, PU 01.03.01, System F/W 1.01, and Web Page 1.00 sends the configuration of the printer in cleartext, which allows remote attackers to obtain the administrative password by connecting to TCP port 5548 or 7777.

All communication with the REST API is unencrypted (HTTP), allowing an attacker to intercept traffic between an actor and the webserver. This leads to the possibility of information gathering and downloading media files.

iDS6 DSSPro Digital Signage System 6.2 contains a sensitive information disclosure vulnerability that allows remote attackers to intercept authentication credentials through cleartext cookie transmission. Attackers can exploit the autoSave feature to capture user passwords during man-in-the-middle attacks on HTTP communications.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the SOAP interface. By default, all communication to/from the device's SOAP Interface (port 5000) is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext

The API in the Push extension for MediaWiki through 1.35 used cleartext for ApiPush credentials, allowing for potential information disclosure.

Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.

Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.

The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).

Ecovacs Deebot T10 1.7.2 transmits Wi-Fi credentials in cleartext during the pairing process.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.

In JetBrains Toolbox App before 2.6 unencrypted credential transmission during SSH authentication was possible

Jenkins Email Extension Plugin 2.72 and 2.73 transmits and displays the SMTP password in plain text as part of the global Jenkins configuration form, potentially resulting in its exposure.

LaraCMS v1.0.1 transmits sensitive information in cleartext which can be intercepted by attackers.

A user running a quick search on a highly forwarded message on WhatsApp for Android from v2.20.108 to v2.20.140 or WhatsApp Business for Android from v2.20.35 to v2.20.49 could have been sent to the Google service over plain HTTP.

Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. In Steeltoe.Management.Endpoint prior to version 4.2.0 and Steeltoe.Management.EndpointCore prior to version 3.4.0, the `Sanitizer` component in the Environment actuator redacts configuration values by matching the configuration key name against a suffix list. The default list (`password`, `secret`, `key`, `token`, `.*credentials.*`, `vcap_services`) does not cover the standard .NET pattern `ConnectionStrings:<name>` or Steeltoe Connectors' `Steeltoe:Client:<type>:Default:ConnectionString`. There is no value-based scrubbing, so full connection string values including embedded `Password=` and `user:pass@host` segments are returned verbatim in `/actuator/env` responses. Steeltoe.Management.Endpoint 4.2.0 and Steeltoe.Management.EndpointCore 3.4.0 patch the issue. If an immediate upgrade is not possible: On the standard path, remove `env` from the actuator exposure list; add `.*connectionstring.*` to `KeysToSanitize` as a defense-in-depth measure for both paths; and/or require authorization on actuator endpoints.

The Apache Airflow FTP provider's `FTPSHook.get_conn()` created an `ftplib.FTP_TLS` connection but never called `prot_p()`, so although the control channel was TLS-protected the data channel was transmitted in cleartext. Any deployment using `FTPSHook` or `FTPSFileTransmitOperator` to move files over FTPS exposed file contents and credentials-in-transit to a network attacker able to observe the data connection. Upgrade apache-airflow-providers-ftp to `3.15.1` or later, which issues `PROT P` to encrypt the data channel.

The PaperCut NG/MF (specifically, the embedded application for Konica Minolta devices) is vulnerable to session hijacking. The PaperCut NG/MF Embedded application is a software interface that runs directly on the touch screen of a multi-function device. It was internally discovered that the communication channel between the embedded application and the server was insecure, which could leak data including sensitive information that may be used to mount an  attack on the device. Such an attack could potentially be used to steal data or to perform a phishing attack on the end user.

D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Transmission of Sensitive Information.

Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems use cleartext messages to communicate order information with an order entry system. This could allow an attacker with network access to view sensitive data including PHI.

Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.

Phoenix Hemodialysis Delivery System SW 3.36 and 3.40, The Phoenix Hemodialysis device does not support data-in-transit encryption (e.g., TLS/SSL) when transmitting treatment and prescription data on the network between the Phoenix system and the Exalis dialysis data management tool. An attacker with access to the network could observe sensitive treatment and prescription data sent between the Phoenix system and the Exalis tool.

ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes unencrypted passwords on the network.

ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes a session token on the network.