General Industrial Controls Lynx+ Gateway is vulnerable to a cleartext transmission vulnerability that could allow an attacker to observe network traffic to obtain sensitive information, including plaintext credentials.

General Industrial Controls Lynx+ Gateway  is missing critical authentication in the embedded web server which could allow an attacker to remotely reset the device.

A vulnerability in Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites could allow an unauthenticated, remote attendee to join a password-protected meeting without providing the meeting password. The connection attempt must initiate from a Webex mobile application for either iOS or Android. The vulnerability is due to unintended meeting information exposure in a specific meeting join flow for mobile applications. An unauthorized attendee could exploit this vulnerability by accessing a known meeting ID or meeting URL from the mobile device’s web browser. The browser will then request to launch the device’s Webex mobile application. A successful exploit could allow the unauthorized attendee to join the password-protected meeting. The unauthorized attendee will be visible in the attendee list of the meeting as a mobile attendee. Cisco has applied updates that address this vulnerability and no user action is required. This vulnerability affects Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites releases earlier than 39.11.5 and 40.1.3.

A vulnerability in the Java Remote Method Invocation (RMI) interface of Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because certain RMI listeners are not properly authenticated. An attacker could exploit this vulnerability by sending a crafted request to the affected listener. A successful exploit could allow the attacker to access sensitive information on an affected device.

An improper webserver configuration on Plum IK-401 devices with firmware before 1.02 allows an attacker (with network access to the device) to obtain the configuration file, including hashed credential data. Successful exploitation could allow access to hashed credential data with a single unauthenticated GET request.

SonarQube 8.4.2.36762 allows remote attackers to discover cleartext SMTP, SVN, and GitLab credentials via the api/settings/values URI. NOTE: reportedly, the vendor's position for SMTP and SVN is "it is the administrator's responsibility to configure it.

OpenClinic version 0.8.2 is affected by a missing authentication vulnerability that allows unauthenticated users to access any patient's medical test results, possibly resulting in disclosure of Protected Health Information (PHI) stored in the application, via a direct request for the /tests/ URI.

The wp-courses plugin through 2.0.27 for WordPress allows remote attackers to bypass the intended payment step (for course videos and materials) by using the /wp-json REST API, as exploited in the wild in September 2020. This occurs because show_in_rest is enabled for custom post types (e.g., /wp-json/wp/v2/course and /wp-json/wp/v2/lesson exist).

COMMAX Smart Home System is a smart IoT home solution that allows an unauthenticated attacker to disclose RTSP credentials in plain-text by exploiting the /overview.asp endpoint. Attackers can access sensitive information, including login credentials and DVR settings, by submitting a GET request to this endpoint.

Sectona Spectra before 3.4.0 has a vulnerable SOAP API endpoint that leaks sensitive information about the configured assets without proper authentication. This could be used by unauthorized parties to get configured login credentials of the assets via a modified pAccountID value. NOTE: The vendor has indicated this is not a vulnerability and states "This vulnerability occurred due to wrong configuration of system.

MiniDVBLinux 5.4 contains an unauthenticated vulnerability in the tv_action.sh script that allows remote attackers to generate live stream snapshots through the Simple VDR Protocol. Attackers can request /tpl/tv_action.sh to create and retrieve a live TV screenshot stored in /var/www/images/tv.jpg without authentication.

Tenda D151 and D301 routers contain an unauthenticated configuration download vulnerability that allows remote attackers to retrieve router configuration files. Attackers can send a request to /goform/getimage endpoint to download configuration data including admin credentials without authentication.

Selea Targa IP OCR-ANPR Camera contains an unauthenticated vulnerability that allows remote attackers to access live video streams without authentication. Attackers can directly connect to RTP/RTSP or M-JPEG streams by requesting specific endpoints like p1.mjpg or p1.264 to view camera footage.

Screen SFT DAB 600/C firmware 1.9.3 contains a session management vulnerability that allows attackers to bypass authentication controls by exploiting IP address session binding. Attackers can reuse the same IP address and issue unauthorized requests to the userManager API to change user passwords without proper authentication.

The memory management module has the logic bypass vulnerability. Successful exploitation of this vulnerability may affect data confidentiality.

D-Link DAP-1325 firmware version 1.01 contains a broken access control vulnerability that allows unauthenticated attackers to download device configuration settings without authentication. Attackers can exploit the /cgi-bin/ExportSettings.sh endpoint to retrieve sensitive configuration information by directly accessing the export settings script.

antd-admin 5.5.0 is affected by an incorrect access control vulnerability. Unauthorized access to some interfaces in the foreground leads to leakage of sensitive information.

Screen SFT DAB 600/C Firmware 1.9.3 contains a weak session management vulnerability that allows attackers to bypass authentication controls by reusing IP-bound session identifiers. Attackers can exploit the vulnerable deviceManagement API endpoint to reset device configurations by sending crafted POST requests with manipulated session parameters.

GitLab has remediated an issue in GitLab EE affecting all versions from 18.5 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an unauthenticated user to access API tokens of self-hosted AI models due to improper access control.

D-Link DSL-124 ME_1.00 contains a configuration file disclosure vulnerability that allows unauthenticated attackers to retrieve router settings through a POST request. Attackers can send a specific POST request to the router's configuration endpoint to download a complete backup file containing sensitive network credentials and system configurations.

Statistics Database System developed by Gotac has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly exploit a specific functionality to query database contents.

Screen SFT DAB 600/C firmware 1.9.3 contains an authentication bypass vulnerability that allows attackers to change the admin password without requiring the current credentials. Attackers can exploit the userManager.cgx API endpoint by sending a crafted POST request with a new MD5-hashed password to directly modify the admin account's authentication.

Smartwares HOME easy <=1.0.9 is vulnerable to an unauthenticated database backup download and information disclosure vulnerability. An attacker could disclose sensitive and clear-text information resulting in authentication bypass, session hijacking and full system control.

Denver SHO-110 IP cameras expose a secondary HTTP service on TCP port 8001 that provides access to a '/snapshot' endpoint without authentication. While the primary web interface on port 80 enforces authentication, the backdoor service allows any remote attacker to retrieve image snapshots by directly requesting the 'snapshot' endpoint. An attacker can repeatedly collect snapshots and reconstruct the camera stream, compromising the confidentiality of the monitored environment.

An issue was discovered in Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n where authentication to download the Syslog could be bypassed.

PLANEX CS-QP50F-ING2 smart cameras expose a configuration backup interface over HTTP that does not require authentication. A remote, unauthenticated attacker can directly retrieve a compressed configuration backup file from the device. The backup contains sensitive configuration information, including credentials, allowing an attacker to obtain administrative access to the camera and compromise the confidentiality of the monitored environment.

A vulnerability is in the 'MNU_top.htm' page of the Netgear W104, version WAC104-V1.0.4.13, which can allow a remote attacker to access this page without any authentication. When processed, it exposes some key information for the device.

A vulnerability is in the 'live_mfg.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When processed, it exposes some key information of the manager of router.

In JetBrains TeamCity before 2026.1 2025.11.5 authenticated users could expose server API to unauthorised access

A missing authentication check in the WebSocket channel used for the Check Point IoT integration in Nozomi Networks Guardian and CMC, may allow an unauthenticated attacker to obtain assets data without authentication. Malicious unauthenticated users with knowledge on the underlying system may be able to extract limited asset information.

The affected product lacks proper authentication required to query the server on the Ignition 8 Gateway (versions prior to 8.0.10) and Ignition 7 Gateway (versions prior to 7.9.14), allowing an attacker to obtain sensitive information.

The S3 buckets and keys in a secure Apache Ozone Cluster must be inaccessible to anonymous access by default. The current security vulnerability allows access to keys and buckets through a curl command or an unauthenticated HTTP request. This enables unauthorized access to buckets and keys thereby exposing data to anonymous clients or users. This affected Apache Ozone prior to the 1.1.0 release.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. There exists an exposed administration function in getcfg.php, which can be used to call various services. It can be utilized by an attacker to retrieve various sensitive information, such as admin login credentials, by setting the value of _POST_SERVICES in the query string to DEVICE.ACCOUNT.

Missing authentication in the SearchStudentsRFID method in IDAttend’s IDWeb application 3.1.052 and earlier allows extraction sensitive student data by unauthenticated attackers.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The wireless network password is exposed in a QR encoded picture that an unauthenticated adversary can download via the web-management interface.

OpenVPN 2.5.1 and earlier versions allows a remote attackers to bypass authentication and access control channel data on servers configured with deferred authentication, which can be used to potentially trigger further information leaks.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.0.8-std devices. Authentication is not required to download the support file that contains sensitive information such as cleartext credentials and password hashes.

When Xiaomi router firmware is updated in 2020, there is an unauthenticated API that can reveal WIFI password vulnerability. This vulnerability is caused by the lack of access control policies on some API interfaces. Attackers can exploit this vulnerability to enter the background and execute background command injection.

Veritas APTARE versions prior to 10.4 allowed sensitive information to be accessible without authentication.

A security issue exists within FactoryTalk Activation Manager. An error in the implementation of cryptography within the software could allow attackers to decrypt traffic. This could result in data exposure, session hijacking, or full communication compromise.

TeamPass 2.1.27.36 allows an unauthenticated attacker to retrieve files from the TeamPass web root. This may include backups or LDAP debug files.

userfiles/modules/users/controller/controller.php in Microweber before 1.1.20 allows an unauthenticated user to disclose the users database via a /modules/ POST request.

An issue was discovered where there are multiple externally accessible pages that do not require any sort of authentication, and store system information for internal usage. The devices automatically query these pages to update dashboards and other statistics, but the pages can be accessed externally without any authentication. All the pages follow the naming convention live_(string).shtml. Among the information disclosed is: interface status logs, IP address of the device, MAC address of the device, model and current firmware version, location, all running processes, all interfaces and their statuses, all current DHCP leases and the associated hostnames, all other wireless networks in range of the router, memory statistics, and components of the configuration of the device such as enabled features. Affected devices: Affected devices are: Wavlink WN530HG4, Wavlink WN575A3, Wavlink WN579G3,Wavlink WN531G3, Wavlink WN533A8, Wavlink WN531A6, Wavlink WN551K1, Wavlink WN535G3, Wavlink WN530H4, Wavlink WN57X93, WN572HG3, Wavlink WN578A2, Wavlink WN579G3, Wavlink WN579X3, and Jetstream AC3000/ERAC3000

An issue was discovered in CIPPlanner CIPAce 6.80 Build 2016031401. GetDistributedPOP3 allows attackers to obtain the username and password of the SMTP user.

An information disclosure vulnerability in the /cgi-bin/ExportAllSettings.sh endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to leak router settings, including cleartext login details, DNS settings, and other sensitive information without authentication.

An issue was discovered on Samsung mobile devices with Q(10.0) software. The DeX Lockscreen allows attackers to access the quick panel and notifications. The Samsung ID is SVE-2019-16532 (March 2020).

Wipro Holmes Orchestrator 20.4.1 (20.4.1_02_11_2020) allows remote attackers to read application log files containing sensitive information via a predictable /log URI.

An authentication bypass vulnerability exists in Open-WebUI <=0.6.32 in the /api/config endpoint. The endpoint lacks proper authentication and authorization controls, exposing sensitive system configuration data to unauthenticated remote attackers.

An authentication bypass vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute certain IPMI calls that could lead to exposure of limited system information.

MachineSense devices use unauthenticated MQTT messaging to monitor devices and remote viewing of sensor data by users.