TP-Link Omada ER605 Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DNS names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22523.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/check_reg_verify_code function which could let a remove malicious user execute arbitrary code via a crafted post request.

A Buffer Overflow vulnerabilitiy exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/register feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/modify_account_pwd feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reg_verify_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

TP-Link TL-WR940N V3 and V4 with firmware 3.16.9 and earlier contain a buffer overflow via the dnsserver1 and dnsserver2 parameters at /userRpm/Wan6to4TunnelCfgRpm.htm. This vulnerability allows an authenticated attacker to execute arbitrary code on the remote device in the context of the root user.

An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. A specially crafted HTTP request can cause a buffer overflow, resulting in remote code execution on the device. An attacker can send an authenticated HTTP request to trigger this vulnerability.

TP-LINK Archer C50v2 Archer C50(US)_V2_160801, TP-LINK Archer C20v1 Archer_C20_V1_150707, and TP-LINK Archer C2v1 Archer_C2_US__V1_170228 were discovered to contain a buffer overflow which may lead to a Denial of Service (DoS) when parsing crafted data.

TP-Link TL-WR886N 7.0 1.1.0 devices allow remote attackers to cause a denial of service (Tlb Load Exception) via crafted DNS packets to port 53/udp.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the username and password parameters at /userRpm/PPPoEv6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

TP-Link TL-WR840N devices allow remote attackers to cause a denial of service (networking outage) via fragmented packets, as demonstrated by an "nmap -f" command.

TP-Link WR840N devices have a buffer overflow via a long Authorization HTTP header.

In TP-Link TL-WDR7660 1.0, the wacWhitelistJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.

In TP-Link TL-WDR7660 1.0, the rtRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.

In TP-Link TL-WDR7660 1.0, the wlanTimerRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.

In TP-Link TL-WDR7660 v1.0, the guestRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.

TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the DNSServers parameter.

TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the X_TP_ClonedMACAddress parameter.

TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the minAddress parameter.

TP-Link TL-WR802N(US), Archer_C50v5_US v4_200 <= 2020.06 contains a buffer overflow vulnerability in the httpd process in the body message. The attack vector is: The attacker can get shell of the router by sending a message through the network, which may lead to remote code execution.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/Wan6to4TunnelCfgRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

In TP-Link Omada er605 1.0.1 through (v2.6) 2.2.3, a cloud-brd binary is susceptible to an integer overflow that leads to a heap-based buffer overflow. After heap shaping, an attacker can achieve code execution in the context of the cloud-brd binary that runs at the root level. This is fixed in ER605(UN)_v2_2.2.4 Build 020240119.

A vulnerability classified as critical has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected is an unknown function of the file /control/WANIPConnection of the component SOAP Request Handler. The manipulation of the argument NewConnectionType leads to buffer overflow. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A denial-of-service vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP request path parsing logic. The implementation enforces length restrictions on the raw request path but does not account for path expansion performed during normalization. An attacker on the adjacent network may send a crafted HTTP request to cause buffer overflow and memory corruption, leading to system interruption or device reboot.

A buffer overflow in the httpd daemon on TP-Link TL-WR841N V10 (firmware version 3.16.9) devices allows an authenticated remote attacker to execute arbitrary code via a GET request to the page for the configuration of the Wi-Fi network.

TP-Link WR841N V8, TP-Link TL-WR940N V2, and TL-WR941ND V5 were discovered to contain a buffer overflow via the radiusSecret parameter at /userRpm/WlanSecurityRpm.

A stack-based buffer overflow vulnerability was identified in the ONVIF SOAP XML Parser in Tapo C200 v3 and C520WS v2.6. When processing XML tags with namespace prefixes, the parser fails to validate the prefix length before copying it to a fixed-size stack buffer. It allowed a crafted SOAP request with an oversized namespace prefix to cause memory corruption in stack. An unauthenticated attacker on the same local network may exploit this flaw to enable remote code execution with elevated privileges, leading to full compromise of the device.

Buffer overflow in in the copy_msg_element function for the devDiscoverHandle server in the TP-Link WR and WDR series, including WDR7400, WDR7500, WDR7660, WDR7800, WDR8400, WDR8500, WDR8600, WDR8620, WDR8640, WDR8660, WR880N, WR886N, WR890N, WR890N, WR882N, and WR708N.

httpd on TP-Link TL-WPA4220 devices (hardware versions 2 through 4) allows remote authenticated users to trigger a buffer overflow (causing a denial of service) by sending a POST request to the /admin/syslog endpoint. Fixed version: TL-WPA4220(EU)_V4_201023

TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to denial-of-service the device via long input values.

TP-LINK NC200 devices through 2.1.10 build 200401, NC210 devices through 1.0.10 build 200401, NC220 devices through 1.3.1 build 200401, NC230 devices through 1.3.1 build 200401, NC250 devices through 1.3.1 build 200401, NC260 devices through 1.5.3 build_200401, and NC450 devices through 1.5.4 build 200401 have a Buffer Overflow

A vulnerability classified as critical has been found in TP-LINK Technologies TL-IPC544EP-W4 1.0.9 Build 240428 Rel 69493n. Affected is the function sub_69064 of the file /bin/main. The manipulation of the argument text leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_APC.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WzdWlanSiteSurveyRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4 was discovered to contain a buffer overflow via the ipStart parameter at /userRpm/WanDynamicIpV6CfgRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR940N V2/V3 and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/QoSRuleListRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V2/V3/V4, TL-WR941ND V5/V6, TL-WR743ND V1 and TL-WR841N V8 were discovered to contain a buffer overflow in the component /userRpm/AccessCtrlAccessTargetsRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link Archer AX10(EU)_V1.2_230220 was discovered to contain a buffer overflow via the function FUN_131e8 - 0x132B4.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

Tp-Link TL-WR840N (EU) v6.20 Firmware (0.9.1 4.17 v0001.0 Build 201124 Rel.64328n) is vulnerable to Buffer Overflow via the Password reset feature.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/upgrade_info feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request.

TP-Link WR886N 3.0 1.0.1 Build 150127 Rel.34123n is vulnerable to Buffer Overflow. Authenticated attackers can crash router httpd services via /userRpm/PingIframeRpm.htm request which contains redundant & in parameter.