The TIFF decoder does not place a limit on the size of compressed tile data. A maliciously-crafted image can exploit this to cause a small image (both in terms of pixel width/height, and encoded size) to make the decoder decode large amounts of compressed data, consuming excessive memory and CPU.

A maliciously-crafted image can cause excessive CPU consumption in decoding. A tiled image with a height of 0 and a very large width can cause excessive CPU consumption, despite the image size (width * height) appearing to be zero.

The crypto/tls package of Go through 1.16.5 does not properly assert that the type of public key in an X.509 certificate matches the expected type when doing a RSA based key exchange, allowing a malicious TLS server to cause a TLS client to panic.

During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

tar.Reader can allocate an unbounded amount of memory when reading a maliciously-crafted archive containing a large number of sparse regions encoded in the "old GNU sparse map" format.

When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines.

A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function.

If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

An attacker can cause excessive memory growth in a Go server accepting HTTP/2 requests. HTTP/2 server connections contain a cache of HTTP header keys sent by the client. While the total number of entries in this cache is capped, an attacker sending very large keys can cause the server to allocate approximately 64 MiB per open connection.

The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption.

Reader.Read does not set a limit on the maximum size of file headers. A maliciously crafted archive could cause Read to allocate unbounded amounts of memory, potentially causing resource exhaustion or panics. After fix, Reader.Read limits the maximum size of header blocks to 1 MiB.

In archive/zip in Go before 1.16.8 and 1.17.x before 1.17.1, a crafted archive header (falsely designating that many files are present) can cause a NewReader or OpenReader panic. NOTE: this issue exists because of an incomplete fix for CVE-2021-33196.

QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size.

An attacker can craft a malformed TIFF image which will consume a significant amount of memory when passed to DecodeConfig. This could lead to a denial of service.

The processing time for parsing some invalid inputs scales non-linearly with respect to the size of the input. This affects programs which parse untrusted PEM inputs.

The Reader.ReadResponse function constructs a response string through repeated string concatenation of lines. When the number of lines in a response is large, this can cause excessive CPU consumption.

Parsing a maliciously crafted DER payload could allocate large amounts of memory, causing memory exhaustion.

SSH servers parsing GSSAPI authentication requests do not validate the number of mechanisms specified in the request, allowing an attacker to cause unbounded memory consumption.

Go before 1.10.8 and 1.11.x before 1.11.5 mishandles P-521 and P-384 elliptic curves, which allows attackers to cause a denial of service (CPU consumption) or possibly conduct ECDH private key recovery attacks.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.3, `ExtractPluginFromImage()` in OpenBao's OCI plugin downloader extracts a plugin binary from a container image by streaming decompressed tar data via `io.Copy` with no upper bound on the number of bytes written. An attacker who controls or compromises the OCI registry referenced in the victim's configuration can serve a crafted image containing a decompression bomb that decompresses to an arbitrarily large file. The SHA256 integrity check occurs after the full file is written to disk, meaning the hash mismatch is detected only after the damage (disk exhaustion) has already occurred. This allow the attacker to replace **legit plugin image** with no need to change its signature. Version 2.5.3 contains a patch.

A vulnerability was identified in Nothings stb up to 1.22. The impacted element is the function setup_free of the file stb_vorbis.c. The manipulation leads to allocation of resources. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Helm is a tool for managing Charts. A chart archive file can be crafted in a manner where it expands to be significantly larger uncompressed than compressed (e.g., >800x difference). When Helm loads this specially crafted chart, memory can be exhausted causing the application to terminate. This issue has been resolved in Helm v3.17.3.

OpenClaw versions prior to 2026.2.14 contain a denial of service vulnerability in the extractArchive function within src/infra/archive.ts that allows attackers to consume excessive CPU, memory, and disk resources through high-expansion ZIP and TAR archives. Remote attackers can trigger resource exhaustion by providing maliciously crafted archive files during install or update operations, causing service degradation or system unavailability.

OpenClaw versions prior to 2026.2.15 contain a denial of service vulnerability in the web_fetch tool that allows attackers to crash the Gateway process through memory exhaustion by parsing oversized or deeply nested HTML responses. Remote attackers can social-engineer users into fetching malicious URLs with pathological HTML structures to exhaust server memory and cause service unavailability.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory.

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.

An issue was discovered in signotec signoPAD-API/Web (formerly Websocket Pad Server) before 3.1.1 on Windows. It is possible to perform a Denial of Service attack because the application doesn't limit the number of opened WebSocket sockets. If a victim visits an attacker-controlled website, this vulnerability can be exploited.

GNU LibreDWG 0.9.3.2564 has an attempted excessive memory allocation in read_sections_map in decode_r2007.c.

An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the "chained" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable "links" in this "decompression chain" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a "malloc bomb", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.

An issue was discovered in GitLab EE affecting all versions starting with 12.3 before 17.7.7, 17.8 prior to 17.8.5, and 17.9 prior to 17.9.2. A vulnerability in certain GitLab instances could allow an attacker to cause a denial of service condition by manipulating specific API inputs.

The _zip_read_eocd64 function in zip_open.c in libzip before 1.3.0 mishandles EOCD records, which allows remote attackers to cause a denial of service (memory allocation failure in _zip_cdir_grow in zip_dirent.c) via a crafted ZIP archive.

If a MIME email combines OpenPGP and OpenPGP MIME data in a certain way Thunderbird repeatedly attempts to process and display the message, which could cause Thunderbird's user interface to lock up and no longer respond to the user's actions. An attacker could send a crafted message with this structure to attempt a DoS attack. This vulnerability affects Thunderbird < 102.8.

In TextView of TextView.java, there is a possible app hang due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-140218875

The issue was addressed with improved checks. This issue is fixed in iOS 18.2 and iPadOS 18.2, iPadOS 17.7.4, macOS Sequoia 15.2, macOS Sonoma 14.7.3, macOS Ventura 13.7.3, tvOS 18.2, visionOS 2.2, watchOS 11.2. Processing web content may lead to a denial-of-service.

Synapse is a Matrix reference homeserver written in python (pypi package matrix-synapse). Matrix is an ecosystem for open federated Instant Messaging and VoIP. In Synapse before version 1.25.0, a malicious homeserver could redirect requests to their .well-known file to a large file. This can lead to a denial of service attack where homeservers will consume significantly more resources when requesting the .well-known file of a malicious homeserver. This affects any server which accepts federation requests from untrusted servers. Issue is resolved in version 1.25.0. As a workaround the `federation_domain_whitelist` setting can be used to restrict the homeservers communicated with over federation.

Bitcoin-Qt in Bitcoin Core before 0.20.0 allows remote attackers to cause a denial of service (memory consumption and application crash) via a BIP21 r parameter for a URL that has a large file.

IBM QRadar WinCollect Agent 10.0 through 10.1.13 could allow a remote attacker to cause a denial of service by interrupting an HTTP request that could consume memory resources.

An uncontrolled memory allocation in DataBufdata(subBox.length-sizeof(box)) function of Exiv2 0.27 allows attackers to cause a denial of service (DOS) via a crafted input.

PNGDec commit 8abf6be was discovered to contain a memory allocation problem via asan_malloc_linux.cpp.

Discourse is the an open source discussion platform. In affected versions an email activation route can be abused to send mass spam emails. A fix has been included in the latest stable, beta and tests-passed versions of Discourse which rate limits emails. Users are advised to upgrade. Users unable to upgrade should manually rate limit email.

Nextcloud server is an open source, self hosted cloud style services platform. In affected versions an attacker can cause a denial of service by uploading specially crafted files which will cause the server to allocate too much memory / CPU. It is recommended that the Nextcloud Server is upgraded to 21.0.8 , 22.2.4 or 23.0.1. Users unable to upgrade should disable preview generation with the `'enable_previews'` config flag.

iText v7.1.17, up to (exluding)": 7.1.18 and 7.2.2 was discovered to contain an out-of-memory error via the component readStreamBytesRaw, which allows attackers to cause a Denial of Service (DoS) via a crafted PDF file.

curl < 7.84.0 supports "chained" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable "links" in this "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a "malloc bomb", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5, there is a possibility for denial of service by memory exhaustion when net-imap reads server responses. At any time while the client is connected, a malicious server can send can send a "literal" byte count, which is automatically read by the client's receiver thread. The response reader immediately allocates memory for the number of bytes indicated by the server response. This should not be an issue when securely connecting to trusted IMAP servers that are well-behaved. It can affect insecure connections and buggy, untrusted, or compromised servers (for example, connecting to a user supplied hostname). This issue has been patched in versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5.

In libming 0.4.8, a memory exhaustion vulnerability exist in the function cws2fws in util/main.c. Remote attackers could launch denial of service attacks by submitting a crafted SWF file that exploits this vulnerability.

In libming 0.4.8, the parseSWF_DEFINELOSSLESS2 function in util/parser.c lacks a boundary check that would lead to denial-of-service attacks via a crafted SWF file.

ImageMagick 7.0.6-1 has a memory exhaustion vulnerability in ReadOneJNGImage in coders\png.c.

OctoRPKI tries to load the entire contents of a repository in memory, and in the case of a GZIP bomb, unzip it in memory, making it possible to create a repository that makes OctoRPKI run out of memory (and thus crash).