OpenBao is an open source identity-based secrets management system. Prior to 2.5.3, when OpenBao's initial namespace deletion fails, subsequent retries fail to properly remove all data before marking the namespace as deleted. This can affect any outstanding leases as well as potentially leaving unrelated storage entries around. This vulnerability is fixed in 2.5.3.

OpenBao is an open source identity-based secrets management system. OpenBao's namespaces provide multi-tenant separation. Prior to version 2.5.3, a tenant who leaks token accessors can have their token revoked or renewed by a privileged administrator in another tenant. This is addressed in v2.5.3.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.3, `ExtractPluginFromImage()` in OpenBao's OCI plugin downloader extracts a plugin binary from a container image by streaming decompressed tar data via `io.Copy` with no upper bound on the number of bytes written. An attacker who controls or compromises the OCI registry referenced in the victim's configuration can serve a crafted image containing a decompression bomb that decompresses to an arbitrarily large file. The SHA256 integrity check occurs after the full file is written to disk, meaning the hash mismatch is detected only after the damage (disk exhaustion) has already occurred. This allow the attacker to replace **legit plugin image** with no need to change its signature. Version 2.5.3 contains a patch.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.3, OpenBao's Certificate authentication method, when a token renewal is requested and `disable_binding=true` is set, attempts to verify the current request's presented mTLS certificate matches the original. Token renewals for other authentication methods do not require any supplied login information. Due to incorrect matching, the certificate authentication method would allow renewal of tokens for which the attacker had a sibling certificate+key signed by the same CA, but which did not necessarily match the original role or the originally supplied certificate. This implies an attacker could still authenticate to OpenBao in a similar scope, however, token renewal implies that an attacker may be able to extend the lifetime of dynamic leases held by the original token. This attack requires knowledge of either the original token or its accessor. This vulnerability is original from HashiCorp Vault. This is addressed in v2.5.3. As a workaround, ensure privileged roles are tightly scoped to single certificates.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.3, when OpenBao revoked privileges on a role in the PostgreSQL database secrets engine, OpenBao failed to use proper database quoting on schema names provided by PostgreSQL. This could lead to role revocation failures, or more rarely, SQL injection as the management user. This vulnerability was original from HashiCorp Vault. The vulnerability is addressed in v2.5.3. As a workaround, audit table schemas and ensure database users cannot create new schemas and grant privileges on them.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.2, OpenBao installations that have an OIDC/JWT authentication method enabled and a role with `callback_mode=direct` configured are vulnerable to XSS via the `error_description` parameter on the page for a failed authentication. This allows an attacker access to the token used in the Web UI by a victim. The `error_description` parameter has been replaced with a static error message in v2.5.2. The vulnerability can be mitigated by removing any roles with `callback_mode` set to `direct`.

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.2, OpenBao does not prompt for user confirmation when logging in via JWT/OIDC and a role with `callback_mode` set to `direct`. This allows an attacker to start an authentication request and perform "remote phishing" by having the victim visit the URL and automatically log-in to the session of the attacker. Despite being based on the authorization code flow, the `direct` mode calls back directly to the API and allows an attacker to poll for an OpenBao token until it is issued. Version 2.5.2 includes an additional confirmation screen for `direct` type logins that requires manual user interaction in order to finish the authentication. This issue can be worked around either by removing any roles with `callback_mode=direct` or enforcing confirmation for every session on the token issuer side for the Client ID used by OpenBao.

OpenBao is an open source identity-based secrets management system. Prior to version 2.4.4, a privileged operator could use the identity group subsystem to add a root policy to a group identity group, escalating their or another user's permissions in the system. Specifically this is an issue when: an operator in the root namespace has access to identity/groups endpoints and an operator does not have policy access. Otherwise, an operator with policy access could create or modify an existing policy to grant root-equivalent permissions through the sudo capability. This issue has been patched in version 2.4.4.

OpenBao's AWS Plugin generates AWS access credentials based on IAM policies. Prior to version 0.1.1, the AWS Plugin is vulnerable to cross-account IAM role Impersonation in the AWS auth method. The vulnerability allows an IAM role from an untrusted AWS account to authenticate by impersonating a role with the same name in a trusted account, leading to unauthorized access. This impacts all users of the auth-aws plugin who operate in a multi-account AWS environment where IAM role names may not be unique across accounts. This vulnerability has been patched in version 0.1.1 of the auth-aws plugin. A workaround for this issue involves guaranteeing that IAM role names are unique across all AWS accounts that could potentially interact with your OpenBao environment, and to audit for any duplicate IAM roles.

OpenBao is an open source identity-based secrets management system. Prior to version 2.4.2, OpenBao's audit log did not appropriately redact fields when relevant subsystems sent []byte response parameters rather than strings. This includes, but is not limited to sys/raw with use of encoding=base64, all data would be emitted unredacted to the audit log, and Transit, when performing a signing operation with a derived Ed25519 key, would emit public keys to the audit log. This issue has been patched in OpenBao 2.4.2.

OpenBao is an open source identity-based secrets management system. In versions 2.2.0 to 2.4.1, OpenBao's audit log experienced a regression wherein raw HTTP bodies used by few endpoints were not correctly redacted (HMAC'd). This impacts those using the ACME functionality of PKI, resulting in short-lived ACME verification challenge codes being leaked in the audit logs. Additionally, this impacts those using the OIDC issuer functionality of the identity subsystem, auth and token response codes along with claims could be leaked in the audit logs. ACME verification codes are not usable after verification or challenge expiry so are of limited long-term use. This issue has been patched in OpenBao 2.4.2.

OpenBao is an open source identity-based secrets management system. In OpenBao versions prior to 2.4.1, JSON objects after decoding may use significantly more memory than their serialized version. It is possible to craft a JSON payload to maximize the factor between serialized memory usage and deserialized memory usage, similar to a zip bomb, with factors reaching approximately 35. This can be used to circumvent the max_request_size configuration parameter which is intended to protect against denial of service attacks. The request body is parsed into a map very early in the request handling chain before authentication, which means an unauthenticated attacker can send a specifically crafted JSON object and cause an out-of-memory crash. Additionally, for requests with large numbers of strings, the audit subsystem can consume large quantities of CPU. The vulnerability is fixed in version 2.4.1.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 2.3.1 and below, OpenBao's Login Multi-Factor Authentication (MFA) system allows enforcing MFA using Time-based One Time Password (TOTP). Due to normalization applied by the underlying TOTP library, codes were accepted which could contain whitespace; this whitespace could bypass internal rate limiting of the MFA method and allow reuse of existing MFA codes. This issue was fixed in version 2.3.2. To work around this, use of rate-limiting quotas can limit an attacker's ability to exploit this: https://openbao.org/api-docs/system/rate-limit-quotas/.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 2.3.1 and below, OpenBao allowed the assignment of policies and MFA attribution based upon entity aliases, chosen by the underlying auth method. When the username_as_alias=true parameter in the LDAP auth method was in use, the caller-supplied username was used verbatim without normalization, allowing an attacker to bypass alias-specific MFA requirements. This issue was fixed in version 2.3.2. To work around this, remove all usage of the username_as_alias=true parameter and update any entity aliases accordingly.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, OpenBao's TOTP secrets engine could accept valid codes multiple times rather than strictly-once. This was caused by unexpected normalization in the underlying TOTP library. To work around, ensure that all codes are first normalized before submitting to the OpenBao endpoint. TOTP code verification is a privileged action; only trusted systems should be verifying codes.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, when using OpenBao's userpass auth method, user enumeration was possible due to timing difference between non-existent users and users with stored credentials. This is independent of whether the supplied credentials were valid for the given user. This issue was fixed in version 2.3.2. To work around this issue, users may use another auth method or apply rate limiting quotas to limit the number of requests in a period of time: https://openbao.org/api-docs/system/rate-limit-quotas/.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, attackers could bypass the automatic user lockout mechanisms in the OpenBao Userpass or LDAP auth systems. This was caused by different aliasing between pre-flight and full login request user entity alias attributions. This is fixed in version 2.3.2. To work around this issue, existing users may apply rate-limiting quotas on the authentication endpoints:, see https://openbao.org/api-docs/system/rate-limit-quotas/.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 2.3.1 and below, some OpenBao deployments intentionally limit privileged API operators from executing system code or making network connections. However, these operators can bypass both restrictions through the audit subsystem by manipulating log prefixes. This allows unauthorized code execution and network access that violates the intended security model. This issue is fixed in version 2.3.2. To workaround, users can block access to sys/audit/* endpoints using explicit deny policies, but root operators cannot be restricted this way.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 2.3.1 and below, accounts with access to highly-privileged identity entity systems in root namespaces were able to increase their scope directly to the root policy. While the identity system allowed adding arbitrary policies, which in turn could contain capability grants on arbitrary paths, the root policy was restricted to manual generation using unseal or recovery key shares. The global root policy was not accessible from child namespaces. This issue is fixed in version 2.3.2. To workaround this vulnerability, use of denied_parameters in any policy which has access to the affected identity endpoints (on identity entities) may be sufficient to prohibit this type of attack.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. OpenBao before v2.3.0 allowed an attacker to perform unauthenticated, unaudited cancellation of root rekey and recovery rekey operations, effecting a denial of service. In OpenBao v2.2.0 and later, manually setting the configuration option `disable_unauthed_rekey_endpoints=true` allows an operator to deny these rarely-used endpoints on global listeners. A patch is available at commit fe75468822a22a88318c6079425357a02ae5b77b. In a future OpenBao release communicated on OpenBao's website, the maintainers will set this to `true` for all users and provide an authenticated alternative. As a workaround, if an active proxy or load balancer sits in front of OpenBao, an operator can deny requests to these endpoints from unauthorized IP ranges.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. OpenBao before v2.3.0 may leak sensitive information in logs when processing malformed data. This is separate from the earlier HCSEC-2025-09 / CVE-2025-4166. This issue has been fixed in OpenBao v2.3.0 and later. Like with HCSEC-2025-09, there is no known workaround except to ensure properly formatted requests from all clients.

Vault Community and Vault Enterprise Key/Value (kv) Version 2 plugin may unintentionally expose sensitive information in server and audit logs when users submit malformed payloads during secret creation or update operations via the Vault REST API. This vulnerability, identified as CVE-2025-4166, is fixed in Vault Community 1.19.3 and Vault Enterprise 1.19.3, 1.18.9, 1.17.16, 1.16.20.

Vault Community and Vault Enterprise (“Vault”) clusters using Vault’s Integrated Storage backend are vulnerable to a denial-of-service (DoS) attack through memory exhaustion through a Raft cluster join API endpoint . An attacker may send a large volume of requests to the endpoint which may cause Vault to consume excessive system memory resources, potentially leading to a crash of the underlying system and the Vault process itself. This vulnerability, CVE-2024-8185, is fixed in Vault Community 1.18.1 and Vault Enterprise 1.18.1, 1.17.8, and 1.16.12.

A privileged Vault operator with write permissions to the root namespace’s identity endpoint could escalate their own or another user’s privileges to Vault’s root policy. Fixed in Vault Community Edition 1.18.0 and Vault Enterprise 1.18.0, 1.17.7, 1.16.11, and 1.15.16.

Vault’s SSH secrets engine did not require the valid_principals list to contain a value by default. If the valid_principals and default_user fields of the SSH secrets engine configuration are not set, an SSH certificate requested by an authorized user to Vault’s SSH secrets engine could be used to authenticate as any user on the host. Fixed in Vault Community Edition 1.17.6, and in Vault Enterprise 1.17.6, 1.16.10, and 1.15.15.

Vault and Vault Enterprise (“Vault”) TLS certificate auth method did not correctly validate client certificates when configured with a non-CA certificate as trusted certificate. In this configuration, an attacker may be able to craft a malicious certificate that could be used to bypass authentication. Fixed in Vault 1.15.5 and 1.14.10.