BlackVue DR750-2CH LTE v.1.012_2022.10.26 was discovered to contain a weak default passphrase which can be easily cracked via a brute force attack if the WPA2 handshake is intercepted.
This vulnerability exists in Apex Softcell LD Geo due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on login OTP, which could lead to gain unauthorized access to other user accounts.
DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.
Improper Restriction of Excessive Authentication Attempts in GitHub repository azuracast/azuracast prior to 0.18.3.
Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.
A lack of rate limiting on the password reset endpoint of Chamberlain myQ v5.222.0.32277 (on iOS) allows attackers to compromise user accounts via a bruteforce attack.
A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.
Microsoft Exchange Server Elevation of Privilege Vulnerability
Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.
Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 0.0.0.
Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0
GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.
An issue in GX Group GPON ONT Titanium 2122A T2122-V1.26EXL allows attackers to escalate privileges via a brute force attack at the login page.
Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.
A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause brute force attacks to take over the admin account when the product does not implement a rate limit mechanism on the admin authentication form. Affected Products: Conextâ„¢ ComBox (All Versions)
In ExtremeGuest Essentials before 25.5.0, captive-portal may permit unauthorized access via manual brute-force procedure. Under certain ExtremeGuest Essentials captive-portal SSID configurations, repeated manual login attempts may allow an unauthenticated device to be marked as authenticated and obtain network access. Client360 logs may display the client MAC as the username despite no MAC-authentication being enabled.
Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.
WiJungle NGFW Version U250 was discovered to be vulnerable to No Rate Limit attack, allowing the attacker to brute force the admin password leading to Account Take Over.
Dell EMC XtremIO versions prior to X2 6.4.0-22 contain a bruteforce vulnerability. A remote unauthenticated attacker can potentially exploit this vulnerability and gain access to an admin account.
Dell EMC PowerStore, contain(s) an Improper Restriction of Excessive Authentication Attempts Vulnerability in PowerStore Manager GUI. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.
An issue in TopIDP3000 Topsec Operating System tos_3.3.005.665b.15_smpidp allows attackers to perform a brute-force attack via a crafted session_id cookie.
A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow unauthorized access when an attacker uses brute force. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.
An issue was discovered in weijiang1994 university-bbs (aka Blogin) in commit 9e06bab430bfc729f27b4284ba7570db3b11ce84 (2025-01-13). A weak verification code generation mechanism combined with missing rate limiting allows attackers to perform brute-force attacks on verification codes without authentication. Successful exploitation may result in account takeover via password reset or other authentication bypass methods.
VAXstations running Open VMS 5.3 through 5.5-2 with VMS DECwindows or MOTIF do not properly disable access to user accounts that exceed the break-in limit threshold for failed login attempts, which makes it easier for attackers to conduct brute force password guessing.
A lack of rate limiting in the login mechanism of SigningHub v8.6.8 allows attackers to bypass authentication via a brute force attack.
Dell Unity, Dell UnityVSA, and Dell Unity XT versions before 5.2.0.0.5.173 do not restrict excessive authentication attempts in Unisphere GUI. A remote unauthenticated attacker may potentially exploit this vulnerability to brute-force passwords and gain access to the system as the victim. Account takeover is possible if weak passwords are used by users.
vantage6 is an open source framework built to enable, manage and deploy privacy enhancing technologies like Federated Learning and Multi-Party Computation. If attacker gets access to an authenticated session, they can try to brute-force the user password by using the change password functionality: they can call that route infinitely which will return the message that password is wrong until it is correct. This vulnerability is fixed in 4.11.
The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.
The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.
The MEAC300-FNADE4 does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.
The telnet server for 3Com hardware such as PS40 SuperStack II does not delay or disconnect remote attackers who provide an incorrect username or password, which makes it easier to break into the server via brute force password guessing.
Beck IPC GmbH IPC@CHIP telnet service does not delay or disconnect users from the service when bad passwords are entered, which makes it easier for remote attackers to conduct brute force password guessing attacks.
Improper Restriction of Excessive Authentication Attempts in GitHub repository wger-project/wger prior to 2.2.
User login brute force protection functionality bypass
Lightwave ConsoleServer 3200 does not disconnect users after unsuccessful login attempts, which could allow remote attackers to conduct brute force password guessing.
The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.
A vulnerability has been identified in Mendix Forgot Password Appstore module (All versions >= V3.3.0 < V3.5.1), Mendix Forgot Password Appstore module (Mendix 7 compatible) (All versions < V3.2.2). Initial passwords are generated in an insecure manner. This could allow an unauthenticated remote attacker to efficiently brute force passwords in specific situations.
Improper Restriction of Excessive Authentication Attempts in GitHub repository janeczku/calibre-web prior to 0.6.20.
A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.
Improper Restriction of Excessive Authentication Attempts in GitHub repository heroiclabs/nakama prior to 3.13.0. This results in login brute-force attacks.
An IBM Spectrum Protect storage agent could allow a remote attacker to perform a brute force attack by allowing unlimited attempts to login to the storage agent without locking the administrative ID. A remote attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to both the IBM Spectrum Protect storage agent and the IBM Spectrum Protect Server 8.1.0.000 through 8.1.14 with which it communicates. IBM X-Force ID: 226326.
Dell PowerScale OneFS, versions 8.2.x-9.3.0.x, contain an improper restriction of excessive authentication attempts. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to compromised accounts.
Dell EMC AppSync versions 3.9 to 4.3 contain an Improper Restriction of Excessive Authentication Attempts Vulnerability that can be exploited from UI and CLI. An adjacent unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.
In some cases, an unsuccessful attempt to log into IBM Spectrum Protect Operations Center 8.1.0.000 through 8.1.14.000 does not cause the administrator's invalid sign-on count to be incremented on the IBM Spectrum Protect Server. An attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to the IBM Spectrum Protect Server. IBM X-Force ID: 226325.
Improper Restriction of Excessive Authentication Attempts in GitHub repository mastodon/mastodon prior to 4.0.0.
The application does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it possible for an attacker to guess user credentials.
The code that performs password matching when using 'Basic' HTTP authentication does not use a constant-time memcmp and has no rate-limiting. This means that an unauthenticated network attacker can brute-force the HTTP basic password, byte-by-byte, by recording the webserver's response time until the unauthorized (401) response.
Various rest resources in Fisheye and Crucible before version 4.8.9 allowed remote attackers to brute force user login credentials as rest resources did not check if users were beyond their max failed login limits and therefore required solving a CAPTCHA in addition to providing user credentials for authentication via a improper restriction of excess authentication attempts vulnerability.
Improper restriction of excessive authentication attempts on some authentication methods in Checkmk before 2.3.0b5 (beta), 2.2.0p26, 2.1.0p43, and in Checkmk 2.0.0 (EOL) facilitates password brute-forcing.