In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels Some lwtunnels have a dst cache for post-transformation dst. If the packet destination did not change we may end up recording a reference to the lwtunnel in its own cache, and the lwtunnel state will never be freed. Discovered by the ioam6.sh test, kmemleak was recently fixed to catch per-cpu memory leaks. I'm not sure if rpl and seg6 can actually hit this, but in principle I don't see why not.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: ravb: Fix missing rtnl lock in suspend/resume path Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to ravb_open, ravb_close and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Without this fix, the following warning is triggered: [ 39.032969] ============================= [ 39.032983] WARNING: suspicious RCU usage [ 39.033019] ----------------------------- [ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious rcu_dereference_protected() usage! ... [ 39.033597] stack backtrace: [ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted 6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7 [ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) [ 39.033628] Call trace: [ 39.033633] show_stack+0x14/0x1c (C) [ 39.033652] dump_stack_lvl+0xb4/0xc4 [ 39.033664] dump_stack+0x14/0x1c [ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c [ 39.033682] phy_detach+0x160/0x190 [ 39.033694] phy_disconnect+0x40/0x54 [ 39.033703] ravb_close+0x6c/0x1cc [ 39.033714] ravb_suspend+0x48/0x120 [ 39.033721] dpm_run_callback+0x4c/0x14c [ 39.033731] device_suspend+0x11c/0x4dc [ 39.033740] dpm_suspend+0xdc/0x214 [ 39.033748] dpm_suspend_start+0x48/0x60 [ 39.033758] suspend_devices_and_enter+0x124/0x574 [ 39.033769] pm_suspend+0x1ac/0x274 [ 39.033778] state_store+0x88/0x124 [ 39.033788] kobj_attr_store+0x14/0x24 [ 39.033798] sysfs_kf_write+0x48/0x6c [ 39.033808] kernfs_fop_write_iter+0x118/0x1a8 [ 39.033817] vfs_write+0x27c/0x378 [ 39.033825] ksys_write+0x64/0xf4 [ 39.033833] __arm64_sys_write+0x18/0x20 [ 39.033841] invoke_syscall+0x44/0x104 [ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4 [ 39.033862] do_el0_svc+0x18/0x20 [ 39.033870] el0_svc+0x3c/0xf0 [ 39.033880] el0t_64_sync_handler+0xc0/0xc4 [ 39.033888] el0t_64_sync+0x154/0x158 [ 39.041274] ravb 11c30000.ethernet eth0: Link is Down

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock (through crypto_exit_scomp_ops_async()). On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through crypto_scomp_init_tfm()), and then allocates memory. If the allocation results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex. The above dependencies can cause an ABBA deadlock. For example in the following scenario: (1) Task A running on CPU #1: crypto_alloc_acomp_node() Holds scomp_lock Enters reclaim Reads per_cpu_ptr(pool->acomp_ctx, 1) (2) Task A is descheduled (3) CPU #1 goes offline zswap_cpu_comp_dead(CPU #1) Holds per_cpu_ptr(pool->acomp_ctx, 1)) Calls crypto_free_acomp() Waits for scomp_lock (4) Task A running on CPU #2: Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1 DEADLOCK Since there is no requirement to call crypto_free_acomp() with the per-CPU acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is unlocked. Also move the acomp_request_free() and kfree() calls for consistency and to avoid any potential sublte locking dependencies in the future. With this, only setting acomp_ctx fields to NULL occurs with the mutex held. This is similar to how zswap_cpu_comp_prepare() only initializes acomp_ctx fields with the mutex held, after performing all allocations before holding the mutex. Opportunistically, move the NULL check on acomp_ctx so that it takes place before the mutex dereference.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (strange) permission model and has almost no regression risk. This api should stop to exist though.

In the Linux kernel, the following vulnerability has been resolved: btrfs: add the missing error handling inside get_canonical_dev_path Inside function get_canonical_dev_path(), we call d_path() to get the final device path. But d_path() can return error, and in that case the next strscpy() call will trigger an invalid memory access. Add back the missing error handling for d_path().

In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

In the Linux kernel, the following vulnerability has been resolved: Revert "smb: client: fix TCP timers deadlock after rmmod" This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801. Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is mentioned as CVE-2024-54680, but is actually did not fix anything; The issue can be reproduced on top of it. [0] Also, it reverted the change by commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") and introduced a real issue by reviving the kernel TCP socket. When a reconnect happens for a CIFS connection, the socket state transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync() in tcp_close() stops all timers for the socket. If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1 forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans. Usually, FIN can be retransmitted by the peer, but if the peer aborts the connection, the issue comes into reality. I warned about this privately by pointing out the exact report [1], but the bogus fix was finally merged. So, we should not stop the timers to finally kill the connection on our side in that case, meaning we must not use a kernel socket for TCP whose sk->sk_net_refcnt is 0. The kernel socket does not have a reference to its netns to make it possible to tear down netns without cleaning up every resource in it. For example, tunnel devices use a UDP socket internally, but we can destroy netns without removing such devices and let it complete during exit. Otherwise, netns would be leaked when the last application died. However, this is problematic for TCP sockets because TCP has timers to close the connection gracefully even after the socket is close()d. The lifetime of the socket and its netns is different from the lifetime of the underlying connection. If the socket user does not maintain the netns lifetime, the timer could be fired after the socket is close()d and its netns is freed up, resulting in use-after-free. Actually, we have seen so many similar issues and converted such sockets to have a reference to netns. That's why I converted the CIFS client socket to have a reference to netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right fix**. Regarding the LOCKDEP issue, we can prevent the module unload by bumping the module refcount when switching the LOCKDDEP key in sock_lock_init_class_and_name(). [2] For a while, let's revert the bogus fix. Note that now we can use sk_net_refcnt_upgrade() for the socket conversion, but I'll do so later separately to make backport easy.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: drop beyond-EOF folios with the right number of refs When an after-split folio is large and needs to be dropped due to EOF, folio_put_refs(folio, folio_nr_pages(folio)) should be used to drop all page cache refs. Otherwise, the folio will not be freed, causing memory leak. This leak would happen on a filesystem with blocksize > page_size and a truncate is performed, where the blocksize makes folios split to >0 order ones, causing truncated folios not being freed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: init return value in amdgpu_ttm_clear_buffer Otherwise an uninitialized value can be returned if amdgpu_res_cleared returns true for all regions. Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812 (cherry picked from commit 7c62aacc3b452f73a1284198c81551035fac6d71)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix error code in chan_alloc_skb_cb() The chan_alloc_skb_cb() function is supposed to return error pointers on error. Returning NULL will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix uninit-value in vxlan_vnifilter_dump() KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range() Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results in the following warning: unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0) Call Trace: xen_read_msr+0x1e/0x30 amd_get_mmconfig_range+0x2b/0x80 quirk_amd_mmconfig_area+0x28/0x100 pnp_fixup_device+0x39/0x50 __pnp_add_device+0xf/0x150 pnp_add_device+0x3d/0x100 pnpacpi_add_device_handler+0x1f9/0x280 acpi_ns_get_device_callback+0x104/0x1c0 acpi_ns_walk_namespace+0x1d0/0x260 acpi_get_devices+0x8a/0xb0 pnpacpi_init+0x50/0x80 do_one_initcall+0x46/0x2e0 kernel_init_freeable+0x1da/0x2f0 kernel_init+0x16/0x1b0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the right course of action, so no change is needed there. This was most likely exposed by fixing the Xen MSR accessors to not be silently-safe.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix lockup on tx to unregistering netdev with carrier Commit in a fixes tag attempted to fix the issue in the following sequence of calls: do_output -> ovs_vport_send -> dev_queue_xmit -> __dev_queue_xmit -> netdev_core_pick_tx -> skb_tx_hash When device is unregistering, the 'dev->real_num_tx_queues' goes to zero and the 'while (unlikely(hash >= qcount))' loop inside the 'skb_tx_hash' becomes infinite, locking up the core forever. But unfortunately, checking just the carrier status is not enough to fix the issue, because some devices may still be in unregistering state while reporting carrier status OK. One example of such device is a net/dummy. It sets carrier ON on start, but it doesn't implement .ndo_stop to set the carrier off. And it makes sense, because dummy doesn't really have a carrier. Therefore, while this device is unregistering, it's still easy to hit the infinite loop in the skb_tx_hash() from the OVS datapath. There might be other drivers that do the same, but dummy by itself is important for the OVS ecosystem, because it is frequently used as a packet sink for tcpdump while debugging OVS deployments. And when the issue is hit, the only way to recover is to reboot. Fix that by also checking if the device is running. The running state is handled by the net core during unregistering, so it covers unregistering case better, and we don't really need to send packets to devices that are not running anyway. While only checking the running state might be enough, the carrier check is preserved. The running and the carrier states seem disjoined throughout the code and different drivers. And other core functions like __dev_direct_xmit() check both before attempting to transmit a packet. So, it seems safer to check both flags in OVS as well.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix variable not being completed when function returns When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18

In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too.

In the Linux kernel, the following vulnerability has been resolved: bpf: Send signals asynchronously if !preemptible BPF programs can execute in all kinds of contexts and when a program running in a non-preemptible context uses the bpf_send_signal() kfunc, it will cause issues because this kfunc can sleep. Change `irqs_disabled()` to `!preemptible()`.

In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass() scx_ops_bypass() iterates all CPUs to re-enqueue all the scx tasks. For each CPU, it acquires a lock using rq_lock() regardless of whether a CPU is offline or the CPU is currently running a task in a higher scheduler class (e.g., deadline). The rq_lock() is supposed to be used for online CPUs, and the use of rq_lock() may trigger an unnecessary warning in rq_pin_lock(). Therefore, replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass(). Without this change, we observe the following warning: ===== START ===== [ 6.615205] rq->balance_callback && rq->balance_callback != &balance_push_callback [ 6.615208] WARNING: CPU: 2 PID: 0 at kernel/sched/sched.h:1730 __schedule+0x1130/0x1c90 ===== END =====

In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu" There are reports that the pagetable walker cache coherency is not a given across the spectrum of SDM845/850 devices, leading to lock-ups and resets. It works fine on some devices (like the Dragonboard 845c, but not so much on the Lenovo Yoga C630). This unfortunately looks like a fluke in firmware development, where likely somewhere in the vast hypervisor stack, a change to accommodate for this was only introduced after the initial software release (which often serves as a baseline for products). Revert the change to avoid additional guesswork around crashes. This reverts commit 6b31a9744b8726c69bb0af290f8475a368a4b805.

In the Linux kernel, the following vulnerability has been resolved: nfsd: don't ignore the return code of svc_proc_register() Currently, nfsd_proc_stat_init() ignores the return value of svc_proc_register(). If the procfile creation fails, then the kernel will WARN when it tries to remove the entry later. Fix nfsd_proc_stat_init() to return the same type of pointer as svc_proc_register(), and fix up nfsd_net_init() to check that and fail the nfsd_net construction if it occurs. svc_proc_register() can fail if the dentry can't be allocated, or if an identical dentry already exists. The second case is pretty unlikely in the nfsd_net construction codepath, so if this happens, return -ENOMEM.

In the Linux kernel, the following vulnerability has been resolved: w1: fix NULL pointer dereference in probe The w1_uart_probe() function calls w1_uart_serdev_open() (which includes devm_serdev_device_open()) before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via w1_uart_serdev_open().

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only set fullmesh for subflow endp With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address. Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before. That's what syzbot found, triggering the following warning: WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: add missing loop break condition Currently imx8mp_blk_ctrl_remove() will continue the for loop until an out-of-bounds exception occurs. pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_domain_detach+0x8/0x48 lr : imx8mp_blk_ctrl_shutdown+0x58/0x90 sp : ffffffc084f8bbf0 x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000 x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028 x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0 x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72 x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000 x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8 x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077 x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: dev_pm_domain_detach+0x8/0x48 platform_shutdown+0x2c/0x48 device_shutdown+0x158/0x268 kernel_restart_prepare+0x40/0x58 kernel_kexec+0x58/0xe8 __do_sys_reboot+0x198/0x258 __arm64_sys_reboot+0x2c/0x40 invoke_syscall+0x5c/0x138 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xc8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadloop in prepare_compress_overwrite() Jan Prusakowski reported a kernel hang issue as below: When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I encountered a problem in generic/475 test where fsstress process gets blocked in __f2fs_write_data_pages() and the test hangs. The options I used are: MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc INFO: task kworker/u8:0:11 blocked for more than 122 seconds. Not tainted 6.14.0-rc3-xfstests-lockdep #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: <TASK> __schedule+0x309/0x8e0 schedule+0x3a/0x100 schedule_preempt_disabled+0x15/0x30 __mutex_lock+0x59a/0xdb0 __f2fs_write_data_pages+0x3ac/0x400 do_writepages+0xe8/0x290 __writeback_single_inode+0x5c/0x360 writeback_sb_inodes+0x22f/0x570 wb_writeback+0xb0/0x410 wb_do_writeback+0x47/0x2f0 wb_workfn+0x5a/0x1c0 process_one_work+0x223/0x5b0 worker_thread+0x1d5/0x3c0 kthread+0xfd/0x230 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> The root cause is: once generic/475 starts toload error table to dm device, f2fs_prepare_compress_overwrite() will loop reading compressed cluster pages due to IO error, meanwhile it has held .writepages lock, it can block all other writeback tasks. Let's fix this issue w/ below changes: - add f2fs_handle_page_eio() in prepare_compress_overwrite() to detect IO error. - detect cp_error earler in f2fs_read_multi_pages().

In the Linux kernel, the following vulnerability has been resolved: landlock: Handle weird files A corrupted filesystem (e.g. bcachefs) might return weird files. Instead of throwing a warning and allowing access to such file, treat them as regular files.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hmm: Don't dereference struct page pointers without notifier lock The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. v2: - Use assert to check whether hmm pfns are valid (Matthew Auld) - Take into account that large pages may cross range boundaries (Matthew Auld) v3: - Don't unnecessarily check for a non-freed sg-table. (Matthew Auld) - Add a missing up_read() in an error path. (Matthew Auld) (cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't clobber ret in btrfs_validate_super() Commit 2a9bb78cfd36 ("btrfs: validate system chunk array at btrfs_validate_super()") introduces a call to validate_sys_chunk_array() in btrfs_validate_super(), which clobbers the value of ret set earlier. This has the effect of negating the validity checks done earlier, making it so btrfs could potentially try to mount invalid filesystems.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: Fix crash on error in gpiochip_get_ngpios() The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash.

In the Linux kernel, the following vulnerability has been resolved: firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region This patch is fix for Linux kernel v2.6.33 or later. For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem have had an issue of use-after-free. The subsystem allows multiple user space listeners to the region, while data of the payload was likely released before the listeners execute read(2) to access to it for copying to user space. The issue was fixed by a commit 281e20323ab7 ("firewire: core: fix use-after-free regression in FCP handler"). The object of payload is duplicated in kernel space for each listener. When the listener executes ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to be released. However, it causes memory leak since the commit relies on call of release_request() in drivers/firewire/core-cdev.c. Against the expectation, the function is never called due to the design of release_client_resource(). The function delegates release task to caller when called with non-NULL fourth argument. The implementation of ioctl_send_response() is the case. It should release the object explicitly. This commit fixes the bug.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Use spin_lock_irqsave() in interruptible context spin_lock/unlock() functions used in interrupt contexts could result in a deadlock, as seen in GitLab issue #13399, which occurs when interrupt comes in while holding a lock. Try to remedy the problem by saving irq state before spin lock acquisition. v2: add irqs' state save/restore calls to all locks/unlocks in signal_irq_work() execution (Maciej) v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead of other lock/unlock calls and add Fixes and Cc tags (Tvrtko); change title and commit message (cherry picked from commit c088387ddd6482b40f21ccf23db1125e8fa4af7e)

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. [ij: edited the commit message.]

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete.

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Add missing deinit() call A warning is triggered when repeatedly connecting and disconnecting the rnbd: list_add corruption. prev->next should be next (ffff88800b13e480), but was ffff88801ecd1338. (prev=ffff88801ecd1340). WARNING: CPU: 1 PID: 36562 at lib/list_debug.c:32 __list_add_valid_or_report+0x7f/0xa0 Workqueue: ib_cm cm_work_handler [ib_cm] RIP: 0010:__list_add_valid_or_report+0x7f/0xa0 ? __list_add_valid_or_report+0x7f/0xa0 ib_register_event_handler+0x65/0x93 [ib_core] rtrs_srv_ib_dev_init+0x29/0x30 [rtrs_server] rtrs_ib_dev_find_or_add+0x124/0x1d0 [rtrs_core] __alloc_path+0x46c/0x680 [rtrs_server] ? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server] ? rcu_is_watching+0xd/0x40 ? __mutex_lock+0x312/0xcf0 ? get_or_create_srv+0xad/0x310 [rtrs_server] ? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server] rtrs_rdma_connect+0x23c/0x2d0 [rtrs_server] ? __lock_release+0x1b1/0x2d0 cma_cm_event_handler+0x4a/0x1a0 [rdma_cm] cma_ib_req_handler+0x3a0/0x7e0 [rdma_cm] cm_process_work+0x28/0x1a0 [ib_cm] ? _raw_spin_unlock_irq+0x2f/0x50 cm_req_handler+0x618/0xa60 [ib_cm] cm_work_handler+0x71/0x520 [ib_cm] Commit 667db86bcbe8 ("RDMA/rtrs: Register ib event handler") introduced a new element .deinit but never used it at all. Fix it by invoking the `deinit()` to appropriately unregister the IB event handler.

In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.

In the Linux kernel, the following vulnerability has been resolved: sockmap, vsock: For connectible sockets allow only connected sockmap expects all vsocks to have a transport assigned, which is expressed in vsock_proto::psock_update_sk_prot(). However, there is an edge case where an unconnected (connectible) socket may lose its previously assigned transport. This is handled with a NULL check in the vsock/BPF recv path. Another design detail is that listening vsocks are not supposed to have any transport assigned at all. Which implies they are not supported by the sockmap. But this is complicated by the fact that a socket, before switching to TCP_LISTEN, may have had some transport assigned during a failed connect() attempt. Hence, we may end up with a listening vsock in a sockmap, which blows up quickly: KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 For connectible sockets, instead of relying solely on the state of vsk->transport, tell sockmap to only allow those representing established connections. This aligns with the behaviour for AF_INET and AF_UNIX.

In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.

In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region() The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region() macro to request a needed resource. A string variable that lives on the stack is then used to store a dynamically computed resource name, which is then passed on as one of the macro arguments. This can lead to undefined behavior. Depending on the current contents of the memory, the manifestations of errors may vary. One possible output may be as follows: $ cat /proc/iomem 30000000-37ffffff : 38000000-3fffffff : Sometimes, garbage may appear after the colon. In very rare cases, if no NULL-terminator is found in memory, the system might crash because the string iterator will overrun which can lead to access of unmapped memory above the stack. Thus, fix this by replacing outbound_name with the name of the previously requested resource. With the changes applied, the output will be as follows: $ cat /proc/iomem 30000000-37ffffff : memory2 38000000-3fffffff : memory3 [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info.

A flaw was found in vringh_kiov_advance in drivers/vhost/vringh.c in the host side of a virtio ring in the Linux Kernel. This issue may result in a denial of service from guest to host via zero length descriptor.