In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Prevent RSB underflow before vmenter On VMX, there are some balanced returns between the time the guest's SPEC_CTRL value is written, and the vmenter. Balanced returns (matched by a preceding call) are usually ok, but it's at least theoretically possible an NMI with a deep call stack could empty the RSB before one of the returns. For maximum paranoia, don't allow *any* returns (balanced or otherwise) between the SPEC_CTRL write and the vmenter. [ bp: Fix 32-bit build. ]

In the Linux kernel, the following vulnerability has been resolved: gfs2: Always check inode size of inline inodes Check if the inode size of stuffed (inline) inodes is within the allowed range when reading inodes from disk (gfs2_dinode_in()). This prevents us from on-disk corruption. The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just truncate inline data to the maximum allowed size don't actually make sense, and they can be removed now as well.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023)

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic on shutdown if multi-chip tree failed to probe DSA probing is atypical because a tree of devices must probe all at once, so out of N switches which call dsa_tree_setup_routing_table() during probe, for (N - 1) of them, "complete" will return false and they will exit probing early. The Nth switch will set up the whole tree on their behalf. The implication is that for (N - 1) switches, the driver binds to the device successfully, without doing anything. When the driver is bound, the ->shutdown() method may run. But if the Nth switch has failed to initialize the tree, there is nothing to do for the (N - 1) driver instances, since the slave devices have not been created, etc. Moreover, dsa_switch_shutdown() expects that the calling @ds has been in fact initialized, so it jumps at dereferencing the various data structures, which is incorrect. Avoid the ensuing NULL pointer dereferences by simply checking whether the Nth switch has previously set "ds->setup = true" for the switch which is currently shutting down. The entire setup is serialized under dsa2_mutex which we already hold.

In the Linux kernel, the following vulnerability has been resolved: macvlan: enforce a consistent minimal mtu macvlan should enforce a minimal mtu of 68, even at link creation. This patch avoids the current behavior (which could lead to crashes in ipv6 stack if the link is brought up) $ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail ! $ ip link sh dev macvlan1 5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff $ ip link set macvlan1 mtu 67 Error: mtu less than device minimum. $ ip link set macvlan1 mtu 68 $ ip link set macvlan1 mtu 8 Error: mtu less than device minimum.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: fix potential memory leak in octep_device_setup() When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible leaked pernet namespace in smc_init() In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ...

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not double complete bio on errors during compressed reads I hit some weird panics while fixing up the error handling from btrfs_lookup_bio_sums(). Turns out the compression path will complete the bio we use if we set up any of the compression bios and then return an error, and then btrfs_submit_data_bio() will also call bio_endio() on the bio. Fix this by making btrfs_submit_compressed_read() responsible for calling bio_endio() on the bio if there are any errors. Currently it was only doing it if we created the compression bios, otherwise it was depending on btrfs_submit_data_bio() to do the right thing. This creates the above problem, so fix up btrfs_submit_compressed_read() to always call bio_endio() in case of an error, and then simply return from btrfs_submit_data_bio() if we had to call btrfs_submit_compressed_read().

In the Linux kernel, the following vulnerability has been resolved: fpga: m10bmc-sec: Fix probe rollback Handle probe error rollbacks properly to avoid leaks.

In the Linux kernel, the following vulnerability has been resolved: powerpc/tm: Fix more userspace r13 corruption Commit cf13435b730a ("powerpc/tm: Fix userspace r13 corruption") fixes a problem in treclaim where a SLB miss can occur on the thread_struct->ckpt_regs while SCRATCH0 is live with the saved user r13 value, clobbering it with the kernel r13 and ultimately resulting in kernel r13 being stored in ckpt_regs. There is an equivalent problem in trechkpt where the user r13 value is loaded into r13 from chkpt_regs to be recheckpointed, but a SLB miss could occur on ckpt_regs accesses after that, which will result in r13 being clobbered with a kernel value and that will get recheckpointed and then restored to user registers. The same memory page is accessed right before this critical window where a SLB miss could cause corruption, so hitting the bug requires the SLB entry be removed within a small window of instructions, which is possible if a SLB related MCE hits there. PAPR also permits the hypervisor to discard this SLB entry (because slb_shadow->persistent is only set to SLB_NUM_BOLTED) although it's not known whether any implementations would do this (KVM does not). So this is an extremely unlikely bug, only found by inspection. Fix this by also storing user r13 in a temporary location on the kernel stack and don't change the r13 register from kernel r13 until the RI=0 critical section that does not fault. The SCRATCH0 change is not strictly part of the fix, it's only used in the RI=0 section so it does not have the same problem as the previous SCRATCH0 bug.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't free the IRQ if it was not requested As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Patchwork: https://patchwork.freedesktop.org/patch/485422/

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: exec: Force single empty string when argv is empty Quoting[1] Ariadne Conill: "In several other operating systems, it is a hard requirement that the second argument to execve(2) be the name of a program, thus prohibiting a scenario where argc < 1. POSIX 2017 also recommends this behaviour, but it is not an explicit requirement[2]: The argument arg0 should point to a filename string that is associated with the process being started by one of the exec functions. ... Interestingly, Michael Kerrisk opened an issue about this in 2008[3], but there was no consensus to support fixing this issue then. Hopefully now that CVE-2021-4034 shows practical exploitative use[4] of this bug in a shellcode, we can reconsider. This issue is being tracked in the KSPP issue tracker[5]." While the initial code searches[6][7] turned up what appeared to be mostly corner case tests, trying to that just reject argv == NULL (or an immediately terminated pointer list) quickly started tripping[8] existing userspace programs. The next best approach is forcing a single empty string into argv and adjusting argc to match. The number of programs depending on argc == 0 seems a smaller set than those calling execve with a NULL argv. Account for the additional stack space in bprm_stack_limits(). Inject an empty string when argc == 0 (and set argc = 1). Warn about the case so userspace has some notice about the change: process './argc0' launched './argc0' with NULL argv: empty string added Additionally WARN() and reject NULL argv usage for kernel threads. [1] https://lore.kernel.org/lkml/20220127000724.15106-1-ariadne@dereferenced.org/ [2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html [3] https://bugzilla.kernel.org/show_bug.cgi?id=8408 [4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt [5] https://github.com/KSPP/linux/issues/176 [6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0 [7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0 [8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix tree mod log mishandling of reallocated nodes We have been seeing the following panic in production kernel BUG at fs/btrfs/tree-mod-log.c:677! invalid opcode: 0000 [#1] SMP RIP: 0010:tree_mod_log_rewind+0x1b4/0x200 RSP: 0000:ffffc9002c02f890 EFLAGS: 00010293 RAX: 0000000000000003 RBX: ffff8882b448c700 RCX: 0000000000000000 RDX: 0000000000008000 RSI: 00000000000000a7 RDI: ffff88877d831c00 RBP: 0000000000000002 R08: 000000000000009f R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000100c40 R12: 0000000000000001 R13: ffff8886c26d6a00 R14: ffff88829f5424f8 R15: ffff88877d831a00 FS: 00007fee1d80c780(0000) GS:ffff8890400c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee1963a020 CR3: 0000000434f33002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: btrfs_get_old_root+0x12b/0x420 btrfs_search_old_slot+0x64/0x2f0 ? tree_mod_log_oldest_root+0x3d/0xf0 resolve_indirect_ref+0xfd/0x660 ? ulist_alloc+0x31/0x60 ? kmem_cache_alloc_trace+0x114/0x2c0 find_parent_nodes+0x97a/0x17e0 ? ulist_alloc+0x30/0x60 btrfs_find_all_roots_safe+0x97/0x150 iterate_extent_inodes+0x154/0x370 ? btrfs_search_path_in_tree+0x240/0x240 iterate_inodes_from_logical+0x98/0xd0 ? btrfs_search_path_in_tree+0x240/0x240 btrfs_ioctl_logical_to_ino+0xd9/0x180 btrfs_ioctl+0xe2/0x2ec0 ? __mod_memcg_lruvec_state+0x3d/0x280 ? do_sys_openat2+0x6d/0x140 ? kretprobe_dispatcher+0x47/0x70 ? kretprobe_rethook_handler+0x38/0x50 ? rethook_trampoline_handler+0x82/0x140 ? arch_rethook_trampoline_callback+0x3b/0x50 ? kmem_cache_free+0xfb/0x270 ? do_sys_openat2+0xd5/0x140 __x64_sys_ioctl+0x71/0xb0 do_syscall_64+0x2d/0x40 Which is this code in tree_mod_log_rewind() switch (tm->op) { case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); This occurs because we replay the nodes in order that they happened, and when we do a REPLACE we will log a REMOVE_WHILE_FREEING for every slot, starting at 0. 'n' here is the number of items in this block, which in this case was 1, but we had 2 REMOVE_WHILE_FREEING operations. The actual root cause of this was that we were replaying operations for a block that shouldn't have been replayed. Consider the following sequence of events 1. We have an already modified root, and we do a btrfs_get_tree_mod_seq(). 2. We begin removing items from this root, triggering KEY_REPLACE for it's child slots. 3. We remove one of the 2 children this root node points to, thus triggering the root node promotion of the remaining child, and freeing this node. 4. We modify a new root, and re-allocate the above node to the root node of this other root. The tree mod log looks something like this logical 0 op KEY_REPLACE (slot 1) seq 2 logical 0 op KEY_REMOVE (slot 1) seq 3 logical 0 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 4 logical 4096 op LOG_ROOT_REPLACE (old logical 0) seq 5 logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 1) seq 6 logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 7 logical 0 op LOG_ROOT_REPLACE (old logical 8192) seq 8 >From here the bug is triggered by the following steps 1. Call btrfs_get_old_root() on the new_root. 2. We call tree_mod_log_oldest_root(btrfs_root_node(new_root)), which is currently logical 0. 3. tree_mod_log_oldest_root() calls tree_mod_log_search_oldest(), which gives us the KEY_REPLACE seq 2, and since that's not a LOG_ROOT_REPLACE we incorrectly believe that we don't have an old root, because we expect that the most recent change should be a LOG_ROOT_REPLACE. 4. Back in tree_mod_log_oldest_root() we don't have a LOG_ROOT_REPLACE, so we don't set old_root, we simply use our e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mmc: jz4740: Apply DMA engine limits to maximum segment size Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and limit the maximum segment size based on the DMA engine's capabilities. This is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536] CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19 Workqueue: kblockd blk_mq_run_work_fn Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac 814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444 00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62 6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009 805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000 ... Call Trace: [<80107670>] show_stack+0x84/0x120 [<80528cd8>] __warn+0xb8/0xec [<80528d78>] warn_slowpath_fmt+0x6c/0xb8 [<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c [<80169d4c>] __dma_map_sg_attrs+0xf0/0x118 [<8016a27c>] dma_map_sg_attrs+0x14/0x28 [<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4 [<804f6714>] jz4740_mmc_pre_request+0x30/0x54 [<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc [<804f5590>] mmc_mq_queue_rq+0x220/0x2d4 [<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664 [<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370 [<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164 [<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94 [<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc [<80134c14>] process_one_work+0x1b8/0x264 [<80134ff8>] worker_thread+0x2ec/0x3b8 [<8013b13c>] kthread+0x104/0x10c [<80101dcc>] ret_from_kernel_thread+0x14/0x1c ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: efi: Do not import certificates from UEFI Secure Boot for T2 Macs On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0 (Removed some logs from here) Call Trace: <TASK> page_fault_oops+0x4f/0x2c0 ? search_bpf_extables+0x6b/0x80 ? search_module_extables+0x50/0x80 ? search_exception_tables+0x5b/0x60 kernelmode_fixup_or_oops+0x9e/0x110 __bad_area_nosemaphore+0x155/0x190 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x8c/0xa0 exc_page_fault+0xd8/0x180 asm_exc_page_fault+0x1e/0x30 (Removed some logs from here) ? __efi_call+0x28/0x30 ? switch_mm+0x20/0x30 ? efi_call_rts+0x19a/0x8e0 ? process_one_work+0x222/0x3f0 ? worker_thread+0x4a/0x3d0 ? kthread+0x17a/0x1a0 ? process_one_work+0x3f0/0x3f0 ? set_kthread_struct+0x40/0x40 ? ret_from_fork+0x22/0x30 </TASK> ---[ end trace 1f82023595a5927f ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get mokx list integrity: Couldn't get size: 0x80000000 So we avoid reading these UEFI variables and thus prevent the crash.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Let probe fail when workqueue cannot be enabled The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix crash by keep old cfg when update TCs more than queues There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed.

In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh.

The (1) real_lookup and (2) __lookup_hash functions in fs/namei.c in the vfs implementation in the Linux kernel before 2.6.25.15 do not prevent creation of a child dentry for a deleted (aka S_DEAD) directory, which allows local users to cause a denial of service ("overflow" of the UBIFS orphan area) via a series of attempted file creations within deleted directories.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set hugetlb mmap base address aligned with pmd size With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings").

In the Linux kernel, the following vulnerability has been resolved: net/smc: Forward wakeup to smc socket waitqueue after fallback When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: ar9331: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The ar9331 is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the ar9331 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The ar9331 driver doesn't have a complex code structure for mdiobus removal, so just replace of_mdiobus_register with the devres variant in order to be all-devres and ensure that we don't free a still-registered bus.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix memory leak in amd_sfh_work Kmemleak tool detected a memory leak in the amd_sfh driver. ==================== unreferenced object 0xffff88810228ada0 (size 32): comm "insmod", pid 3968, jiffies 4295056001 (age 775.792s) hex dump (first 32 bytes): 00 20 73 1f 81 88 ff ff 00 01 00 00 00 00 ad de . s............. 22 01 00 00 00 00 ad de 01 00 02 00 00 00 00 00 "............... backtrace: [<000000007b4c8799>] kmem_cache_alloc_trace+0x163/0x4f0 [<0000000005326893>] amd_sfh_get_report+0xa4/0x1d0 [amd_sfh] [<000000002a9e5ec4>] amdtp_hid_request+0x62/0x80 [amd_sfh] [<00000000b8a95807>] sensor_hub_get_feature+0x145/0x270 [hid_sensor_hub] [<00000000fda054ee>] hid_sensor_parse_common_attributes+0x215/0x460 [hid_sensor_iio_common] [<0000000021279ecf>] hid_accel_3d_probe+0xff/0x4a0 [hid_sensor_accel_3d] [<00000000915760ce>] platform_probe+0x6a/0xd0 [<0000000060258a1f>] really_probe+0x192/0x620 [<00000000fa812f2d>] driver_probe_device+0x14a/0x1d0 [<000000005e79f7fd>] __device_attach_driver+0xbd/0x110 [<0000000070d15018>] bus_for_each_drv+0xfd/0x160 [<0000000013a3c312>] __device_attach+0x18b/0x220 [<000000008c7b4afc>] device_initial_probe+0x13/0x20 [<00000000e6e99665>] bus_probe_device+0xfe/0x120 [<00000000833fa90b>] device_add+0x6a6/0xe00 [<00000000fa901078>] platform_device_add+0x180/0x380 ==================== The fix is to freeing request_list entry once the processed entry is removed from the request_list.

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix slab-out-of-bounds access in packet_recvmsg() syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH and mmap operations, tpacket_rcv() is queueing skbs with garbage in skb->cb[], triggering a too big copy [1] Presumably, users of af_packet using mmap() already gets correct metadata from the mapped buffer, we can simply make sure to clear 12 bytes that might be copied to user space later. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631 CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 memcpy+0x39/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:225 [inline] packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdfd5954c29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60 R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54 </TASK> addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame: ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246 this frame has 1 object: [32, 160) 'addr' Memory state around the buggy address: ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 ^ ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY) calls over the same TCP socket would again trigger the infamous warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); While Talal took into account a mix of regular copied data and MSG_ZEROCOPY one in the same skb, the sendpage() path has been forgotten. We want the charging to happen for sendpage(), because pages could be coming from a pipe. What is missing is the downgrading of pure zerocopy status to make sure sk_forward_alloc will stay synced. Add tcp_downgrade_zcopy_pure() helper so that we can use it from the two callers.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible access to freed memory in link clear After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu() Two bugs exist in the vCPU initialisation path: 1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup path jumps to 'unlock' without calling unpin_host_vcpu() or unpin_host_sve_state(), permanently leaking pin references on the host vCPU and SVE state pages. Extract a register_hyp_vcpu() helper that performs the checks and the store. When register_hyp_vcpu() returns an error, call unpin_host_vcpu() and unpin_host_sve_state() inline before falling through to the existing 'unlock' label. 2. register_hyp_vcpu() publishes the new vCPU pointer into 'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU object. Ensure the store uses smp_store_release() and the load uses smp_load_acquire(). While 'vm_table_lock' currently serialises the store and the load, these barriers ensure the reader sees the fully initialised 'hyp_vcpu' object even if there were a lockless path or if the lock's own ordering guarantees were insufficient for nested object initialization.

An issue was discovered in the Linux kernel before 5.11.11. The netfilter subsystem allows attackers to cause a denial of service (panic) because net/netfilter/x_tables.c and include/linux/netfilter/x_tables.h lack a full memory barrier upon the assignment of a new table value, aka CID-175e476b8cdf.

An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987.

An issue was discovered in the Linux kernel before 5.11.11. The BPF subsystem does not properly consider that resolved_ids and resolved_sizes are intentionally uninitialized in the vmlinux BPF Type Format (BTF), which can cause a system crash upon an unexpected access attempt (in map_create in kernel/bpf/syscall.c or check_btf_info in kernel/bpf/verifier.c), aka CID-350a5c4dd245.

An issue was discovered in the Linux kernel before 5.11.11. The user mode driver (UMD) has a copy_process() memory leak, related to a lack of cleanup steps in kernel/usermode_driver.c and kernel/bpf/preload/bpf_preload_kern.c, aka CID-f60a85cad677.

In the Linux kernel, the following vulnerability has been resolved: net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg When receiving proposal msg in server, the fields v2_ext_offset/ eid_cnt/ism_gid_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field v2_ext_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt before using them.

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix controller deregistration Make sure to deregister the controller before disabling and releasing underlying resources like interrupts and gpios during driver unbind.

In the Linux kernel, the following vulnerability has been resolved: net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/MCE: Always save CS register on AMD Zen IF Poison errors The Instruction Fetch (IF) units on current AMD Zen-based systems do not guarantee a synchronous #MC is delivered for poison consumption errors. Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the microarchitecture does guarantee that the exception is delivered within the same context. In other words, the exact rIP is not known, but the context is known to not have changed. There is no architecturally-defined method to determine this behavior. The Code Segment (CS) register is always valid on such IF unit poison errors regardless of the value of MCG_STATUS[EIPV|RIPV]. Add a quirk to save the CS register for poison consumption from the IF unit banks. This is needed to properly determine the context of the error. Otherwise, the severity grading function will assume the context is IN_KERNEL due to the m->cs value being 0 (the initialized value). This leads to unnecessary kernel panics on data poison errors due to the kernel believing the poison consumption occurred in kernel context.

Uncontrolled resource consumption in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable denial of service via local access.

fs/direct-io.c in the dio subsystem in the Linux kernel before 2.6.23 does not properly zero out the dio struct, which allows local users to cause a denial of service (OOPS), as demonstrated by a certain fio test.

In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap().

An issue was discovered in fs/fuse/fuse_i.h in the Linux kernel before 5.11.8. A "stall on CPU" can occur because a retry loop continually finds the same bad inode, aka CID-775c5033a0d1.

A flaw was found in the Linux kernel's Bluetooth implementation of UART, all versions kernel 3.x.x before 4.18.0 and kernel 5.x.x. An attacker with local access and write permissions to the Bluetooth hardware could use this flaw to issue a specially crafted ioctl function call and cause the system to crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: lib/Kconfig.debug: TEST_IOV_ITER depends on MMU Trying to run the iov_iter unit test on a nommu system such as the qemu kc705-nommu emulation results in a crash. KTAP version 1 # Subtest: iov_iter # module: kunit_iov_iter 1..9 BUG: failure at mm/nommu.c:318/vmap()! Kernel panic - not syncing: BUG! The test calls vmap() directly, but vmap() is not supported on nommu systems, causing the crash. TEST_IOV_ITER therefore needs to depend on MMU.

In Linux 2.6 before 2.6.23, the TRACE_IRQS_ON function in iret_exc calls a C function without ensuring that the segments are set properly. The kernel's %fs needs to be restored before the call in TRACE_IRQS_ON and before enabling interrupts, so that "current" references work. Without this, "current" used in the window between iret_exc and the middle of error_code where %fs is reset, would crash.