In the Linux kernel, the following vulnerability has been resolved: ice: Add netif_device_attach/detach into PF reset flow Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: Check for unset descriptor Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix NULL pointer dereference when removing device In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, Fix an Oops in error handling code The error handling dereferences "vport". There is nothing we can do if it is an error pointer except returning the error code.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: enable all safety features by default In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features.

In the Linux kernel, the following vulnerability has been resolved: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix peer flow lists handling The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-vbtn: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may run on multiple CPU cores racing with themselves. This race gets hit on Dell Venue 7140 tablets when undocking from the keyboard, causing the handler to try and register priv->switches_dev twice, as can be seen from the dev_info() message getting logged twice: [ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event [ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17 [ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event After which things go seriously wrong: [ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17' ... [ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory. [ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018 ... Protect intel-vbtn notify_handler() from racing with itself with a mutex to fix this.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler() When performing a stress test on SMC-R by rmmod mlx5_ib driver during the wrk/nginx test, we found that there is a probability of triggering a panic while terminating all link groups. This issue dues to the race between smc_smcr_terminate_all() and smc_buf_create(). smc_smcr_terminate_all smc_buf_create /* init */ conn->sndbuf_desc = NULL; ... __smc_lgr_terminate smc_conn_kill smc_close_abort smc_cdc_get_slot_and_msg_send __softirqentry_text_start smc_wr_tx_process_cqe smc_cdc_tx_handler READ(conn->sndbuf_desc->len); /* panic dues to NULL sndbuf_desc */ conn->sndbuf_desc = xxx; This patch tries to fix the issue by always to check the sndbuf_desc before send any cdc msg, to make sure that no null pointer is seen during cqe processing.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7091r: Allow users to configure device events AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_snp_shutdown_locked Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ #29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read() If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix system suspend without fbdev being initialized If fbdev is not initialized for some reason - in practice on platforms without display - suspending fbdev should be skipped during system suspend, fix this up. While at it add an assert that suspending fbdev only happens with the display present. This fixes the following: [ 91.227923] PM: suspend entry (s2idle) [ 91.254598] Filesystems sync: 0.025 seconds [ 91.270518] Freezing user space processes [ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds) [ 91.272686] OOM killer disabled. [ 91.272872] Freezing remaining freezable tasks [ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8 [ 91.659981] #PF: supervisor write access in kernel mode [ 91.660252] #PF: error_code(0x0002) - not-present page [ 91.660511] PGD 0 P4D 0 [ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54 [ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown [ 91.661680] RIP: 0010:mutex_lock+0x19/0x30 [ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40 [ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246 [ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000 [ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8 [ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0 [ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20 [ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000 [ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0 [ 91.665988] PKRU: 55555554 [ 91.666131] Call Trace: [ 91.666265] <TASK> [ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915] [ 91.666738] i915_drm_suspend+0xb9/0x100 [i915] [ 91.667029] pci_pm_suspend+0x78/0x170 [ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10 [ 91.667461] dpm_run_callback+0x47/0x150 [ 91.667673] __device_suspend+0x10a/0x4e0 [ 91.667880] dpm_suspend+0x134/0x270 [ 91.668069] dpm_suspend_start+0x79/0x80 [ 91.668272] suspend_devices_and_enter+0x11b/0x890 [ 91.668526] pm_suspend.cold+0x270/0x2fc [ 91.668737] state_store+0x46/0x90 [ 91.668916] kernfs_fop_write_iter+0x11b/0x200 [ 91.669153] vfs_write+0x1e1/0x3a0 [ 91.669336] ksys_write+0x53/0xd0 [ 91.669510] do_syscall_64+0x58/0xc0 [ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40 [ 91.670524] ? do_syscall_64+0x67/0xc0 [ 91.670717] ? __irq_exit_rcu+0x3d/0x140 [ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 91.671202] RIP: 0033:0x7f28ffd14284 v2: CC stable. (Jani) References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015 (cherry picked from commit 9542d708409a41449e99c9a464deb5e062c4bee2)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference

In the Linux kernel, the following vulnerability has been resolved: kvm: s390: Reject memory region operations for ucontrol VMs This change rejects the KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM. This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and would thus result in a null pointer dereference further in. Memory management needs to be performed in userspace and using the ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP. Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2. [frankja@linux.ibm.com: commit message spelling fix, subject prefix fix]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: pse-pd: Fix possible null-deref Fix a possible null dereference when a PSE supports both c33 and PoDL, but only one of the netlink attributes is specified. The c33 or PoDL PSE capabilities are already validated in the ethnl_set_pse_validate() call.

In the Linux kernel, the following vulnerability has been resolved: firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 1373 Comm: modprobe Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:dmi_sysfs_entry_release ... Call Trace: <TASK> kobject_put dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs dmi_decode_table (drivers/firmware/dmi_scan.c:133) dmi_walk (drivers/firmware/dmi_scan.c:1115) dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs do_one_initcall (init/main.c:1296) ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x4000000 from 0xffffffff81000000 ---[ end Kernel panic - not syncing: Fatal exception ]--- It is because previous patch added kobject_put() to release the memory which will call dmi_sysfs_entry_release() and list_del(). However, list_add_tail(entry->list) is called after the error block, so the list_head is uninitialized and cannot be deleted. Move error handling to after list_add_tail to fix this.

In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() If IORESOURCE_MEM is not provided in Device Tree due to any error, resource_list_first_type() will return NULL and pci_parse_request_of_pci_ranges() will just emit a warning. This will cause a NULL pointer dereference. Fix this bug by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: avoid possible NULL skb pointer dereference In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null reference error when checking end of zone This patch fixes a potentially null pointer being accessed by is_end_zone_blkaddr() that checks the last block of a zone when f2fs is mounted as a single device.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later.

In the Linux kernel, the following vulnerability has been resolved: rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access For kernels built with CONFIG_PREEMPT_RCU=y, the following scenario can result in a NULL-pointer dereference: CPU1 CPU2 rcu_preempt_deferred_qs_irqrestore rcu_print_task_exp_stall if (special.b.blocked) READ_ONCE(rnp->exp_tasks) != NULL raw_spin_lock_rcu_node np = rcu_next_node_entry(t, rnp) if (&t->rcu_node_entry == rnp->exp_tasks) WRITE_ONCE(rnp->exp_tasks, np) .... raw_spin_unlock_irqrestore_rcu_node raw_spin_lock_irqsave_rcu_node t = list_entry(rnp->exp_tasks->prev, struct task_struct, rcu_node_entry) (if rnp->exp_tasks is NULL, this will dereference a NULL pointer) The problem is that CPU2 accesses the rcu_node structure's->exp_tasks field without holding the rcu_node structure's ->lock and CPU2 did not observe CPU1's change to rcu_node structure's ->exp_tasks in time. Therefore, if CPU1 sets rcu_node structure's->exp_tasks pointer to NULL, then CPU2 might dereference that NULL pointer. This commit therefore holds the rcu_node structure's ->lock while accessing that structure's->exp_tasks field. [ paulmck: Apply Frederic Weisbecker feedback. ]

In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate preallocated blocks in f2fs_file_open() chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open().

In the Linux kernel, the following vulnerability has been resolved: fscrypt: destroy keyring after security_sb_delete() fscrypt_destroy_keyring() must be called after all potentially-encrypted inodes were evicted; otherwise it cannot safely destroy the keyring. Since inodes that are in-use by the Landlock LSM don't get evicted until security_sb_delete(), this means that fscrypt_destroy_keyring() must be called *after* security_sb_delete(). This fixes a WARN_ON followed by a NULL dereference, only possible if Landlock was being used on encrypted files.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup() devm_kzalloc() may fail, clk_data->name might be NULL and will cause a NULL pointer dereference later. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() If ipi_send_{mask|single}() is called with an invalid interrupt number, all the local variables there will be NULL. ipi_send_verify() which is invoked from these functions does verify its 'data' parameter, resulting in a kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets dereferenced. Add a missing NULL pointer check in ipi_send_verify()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: usb: ucsi: Fix NULL pointer deref in ucsi_connector_change() When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Clean up error handling in vpci_scan_bus() Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: Fix possible NULL dereference In a call to mac80211_hwsim_select_tx_link() the sta pointer might be NULL, thus need to check that it is not NULL before accessing it.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.

In the Linux kernel, the following vulnerability has been resolved: drm/qxl: Add check for drm_cvt_mode Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update.