In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Skip over memory region when node value is NULL In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts number of phandles. But phandles may be empty. So of_parse_phandle() in the parsing loop (0 < a < nph) may return NULL which is later dereferenced. Adjust this issue by adding NULL-return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. [Fixed title to fit within the prescribed 70-75 charcters]

In the Linux kernel, the following vulnerability has been resolved: kvm: s390: Reject memory region operations for ucontrol VMs This change rejects the KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM. This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and would thus result in a null pointer dereference further in. Memory management needs to be performed in userspace and using the ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP. Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2. [frankja@linux.ibm.com: commit message spelling fix, subject prefix fix]

In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.

In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Patchwork: https://patchwork.freedesktop.org/patch/600714/

In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller

In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling.

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease It is not safe to dereference fl->c.flc_owner without first confirming fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict() tests fl_lmops but largely ignores the result and assumes that flc_owner is an nfs4_delegation anyway. This is wrong. With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave as it did before the change mentioned below. This is the same as the current code, but without any reference to a possible delegation.

An issue was discovered in the Linux kernel for powerpc before 5.14.15. It allows a malicious KVM guest to crash the host, when the host is running on Power8, due to an arch/powerpc/kvm/book3s_hv_rmhandlers.S implementation bug in the handling of the SRR1 register values.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check debug trap enable before write dbg_ev_file In interrupt context, write dbg_ev_file will be run by work queue. It will cause write dbg_ev_file execution after debug_trap_disable, which will cause NULL pointer access. v2: cancel work "debug_event_workarea" before set dbg_ev_file as NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove SCSI host only if added If host tries to remove ufshcd driver from a UFS device it would cause a kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host has been defered after MCQ configuration introduced by commit 0cab4023ec7b ("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported"). To guarantee that SCSI host is removed only if it has been added, set the scsi_host_added flag to true after adding a SCSI host and check whether it is set or not before removing it.

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80

In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: btrfs: make cow_file_range_inline() honor locked_page on error The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to pa ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is normally called with input from the firmware, so it should use IWL_FW_CHECK() instead of WARN_ON().

A flaw was found in the Linux kernel’s implementation of reading the SVC RDMA counters. Reading the counter sysctl panics the system. This flaw allows a local attacker with local access to cause a denial of service while the system reboots. The issue is specific to CentOS/RHEL.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index for aux_rd_interval before using aux_rd_interval has size of 7 and should be checked. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check UnboundedRequestEnabled's value CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus if (p->UnboundedRequestEnabled) checks its address, not bool value. This fixes 1 REVERSE_INULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Validate passed in drm syncobj handles in the performance extension If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. (cherry picked from commit a546b7e4d73c23838d7e4d2c92882b3ca902d213)

In the Linux kernel, the following vulnerability has been resolved: f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid mkdir /mnt/test/comp f2fs_io setflags compression /mnt/test/comp dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1 truncate --size 13 /mnt/test/comp/testfile In the above scenario, we can get a BUG_ON. kernel BUG at fs/f2fs/segment.c:3589! Call Trace: do_write_page+0x78/0x390 [f2fs] f2fs_outplace_write_data+0x62/0xb0 [f2fs] f2fs_do_write_data_page+0x275/0x740 [f2fs] f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs] f2fs_write_multi_pages+0x1e5/0xae0 [f2fs] f2fs_write_cache_pages+0xab1/0xc60 [f2fs] f2fs_write_data_pages+0x2d8/0x330 [f2fs] do_writepages+0xcf/0x270 __writeback_single_inode+0x44/0x350 writeback_sb_inodes+0x242/0x530 __writeback_inodes_wb+0x54/0xf0 wb_writeback+0x192/0x310 wb_workfn+0x30d/0x400 The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the page was set the gcing flag by set_cluster_dirty().

In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short.

In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). We had a report that iptables-restore sometimes triggered null-ptr-deref at boot time. [0] The problem is that iptable_nat_table_init() is exposed to user space before the kernel fully initialises netns. In the small race window, a user could call iptable_nat_table_init() that accesses net_generic(net, iptable_nat_net_id), which is available only after registering iptable_nat_net_ops. Let's call register_pernet_subsys() before xt_register_template(). [0]: bpfilter: Loaded bpfilter_umh pid 11702 Started bpfilter BUG: kernel NULL pointer dereference, address: 0000000000000013 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 0 P4D 0 PREEMPT SMP NOPTI CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1 Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246 RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80 RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0 RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240 R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000 R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004 FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? xt_find_table_lock (net/netfilter/x_tables.c:1259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? page_fault_oops (arch/x86/mm/fault.c:727) ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570) ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat xt_find_table_lock (net/netfilter/x_tables.c:1259) xt_request_find_table_lock (net/netfilter/x_tables.c:1287) get_info (net/ipv4/netfilter/ip_tables.c:965) ? security_capable (security/security.c:809 (discriminator 13)) ? ns_capable (kernel/capability.c:376 kernel/capability.c:397) ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656) ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter nf_getsockopt (net/netfilter/nf_sockopt.c:116) ip_getsockopt (net/ipv4/ip_sockglue.c:1827) __sys_getsockopt (net/socket.c:2327) __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) RIP: 0033:0x7f62844685ee Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09 RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0 R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2 R13: 00007f6284 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally.

In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios().

A vulnerability was found in btrfs_alloc_tree_b in fs/btrfs/extent-tree.c in the Linux kernel due to an improper lock operation in btrfs. In this flaw, a user with a local privilege may cause a denial of service (DOS) due to a deadlock problem.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix missing lock on sync reset reload On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […]

In the Linux kernel, the following vulnerability has been resolved: powerpc/qspinlock: Fix deadlock in MCS queue If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ▼ | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ▼ | Interrupt | (happens before "nodes[0].lock = B") | | | ▼ | spin_lock_irqsave(A) | | | ▼ | id = qnodesp->count++ | nodes[1].lock = A | | | ▼ | Tail of MCS queue | | spin_lock_irqsave(A) ▼ | Head of MCS queue ▼ | CPU0 is previous tail ▼ | Spin indefinitely ▼ (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ▼ prev == &qnodes[CPU0].nodes[0] (as qnodes ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vhost_task: Handle SIGKILL by flushing work and exiting Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works.

In the Linux kernel, the following vulnerability has been resolved: irqchip/imx-irqsteer: Handle runtime power management correctly The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ]

In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix error code in drm_client_buffer_vmap_local() This function accidentally returns zero/success on the failure path. It leads to locking issues and an uninitialized *map_copy in the caller.

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.

In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set the list size limit to 200k. Packets received beyond this limit are dropped, assuming they are likely timed out by the time they are handled by user-space. Notably, packets queued on the receive list due to reasons like timed-out sends are preserved even when the list is full.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value.

In the Linux kernel, the following vulnerability has been resolved: ice: Add a per-VF limit on number of FDIR filters While the iavf driver adds a s/w limit (128) on the number of FDIR filters that the VF can request, a malicious VF driver can request more than that and exhaust the resources for other VFs. Add a similar limit in ice.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Check socket flag instead of hcon This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC,

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1].

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix validity interception issue when gisa is switched off We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0

In the Linux kernel, the following vulnerability has been resolved: powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer.