In the Linux kernel, the following vulnerability has been resolved: firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region This patch is fix for Linux kernel v2.6.33 or later. For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem have had an issue of use-after-free. The subsystem allows multiple user space listeners to the region, while data of the payload was likely released before the listeners execute read(2) to access to it for copying to user space. The issue was fixed by a commit 281e20323ab7 ("firewire: core: fix use-after-free regression in FCP handler"). The object of payload is duplicated in kernel space for each listener. When the listener executes ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to be released. However, it causes memory leak since the commit relies on call of release_request() in drivers/firewire/core-cdev.c. Against the expectation, the function is never called due to the design of release_client_resource(). The function delegates release task to caller when called with non-NULL fourth argument. The implementation of ioctl_send_response() is the case. It should release the object explicitly. This commit fixes the bug.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Use spin_lock_irqsave() in interruptible context spin_lock/unlock() functions used in interrupt contexts could result in a deadlock, as seen in GitLab issue #13399, which occurs when interrupt comes in while holding a lock. Try to remedy the problem by saving irq state before spin lock acquisition. v2: add irqs' state save/restore calls to all locks/unlocks in signal_irq_work() execution (Maciej) v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead of other lock/unlock calls and add Fixes and Cc tags (Tvrtko); change title and commit message (cherry picked from commit c088387ddd6482b40f21ccf23db1125e8fa4af7e)

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. [ij: edited the commit message.]

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete.

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Add missing deinit() call A warning is triggered when repeatedly connecting and disconnecting the rnbd: list_add corruption. prev->next should be next (ffff88800b13e480), but was ffff88801ecd1338. (prev=ffff88801ecd1340). WARNING: CPU: 1 PID: 36562 at lib/list_debug.c:32 __list_add_valid_or_report+0x7f/0xa0 Workqueue: ib_cm cm_work_handler [ib_cm] RIP: 0010:__list_add_valid_or_report+0x7f/0xa0 ? __list_add_valid_or_report+0x7f/0xa0 ib_register_event_handler+0x65/0x93 [ib_core] rtrs_srv_ib_dev_init+0x29/0x30 [rtrs_server] rtrs_ib_dev_find_or_add+0x124/0x1d0 [rtrs_core] __alloc_path+0x46c/0x680 [rtrs_server] ? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server] ? rcu_is_watching+0xd/0x40 ? __mutex_lock+0x312/0xcf0 ? get_or_create_srv+0xad/0x310 [rtrs_server] ? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server] rtrs_rdma_connect+0x23c/0x2d0 [rtrs_server] ? __lock_release+0x1b1/0x2d0 cma_cm_event_handler+0x4a/0x1a0 [rdma_cm] cma_ib_req_handler+0x3a0/0x7e0 [rdma_cm] cm_process_work+0x28/0x1a0 [ib_cm] ? _raw_spin_unlock_irq+0x2f/0x50 cm_req_handler+0x618/0xa60 [ib_cm] cm_work_handler+0x71/0x520 [ib_cm] Commit 667db86bcbe8 ("RDMA/rtrs: Register ib event handler") introduced a new element .deinit but never used it at all. Fix it by invoking the `deinit()` to appropriately unregister the IB event handler.

In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.

In the Linux kernel, the following vulnerability has been resolved: sockmap, vsock: For connectible sockets allow only connected sockmap expects all vsocks to have a transport assigned, which is expressed in vsock_proto::psock_update_sk_prot(). However, there is an edge case where an unconnected (connectible) socket may lose its previously assigned transport. This is handled with a NULL check in the vsock/BPF recv path. Another design detail is that listening vsocks are not supposed to have any transport assigned at all. Which implies they are not supported by the sockmap. But this is complicated by the fact that a socket, before switching to TCP_LISTEN, may have had some transport assigned during a failed connect() attempt. Hence, we may end up with a listening vsock in a sockmap, which blows up quickly: KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 For connectible sockets, instead of relying solely on the state of vsk->transport, tell sockmap to only allow those representing established connections. This aligns with the behaviour for AF_INET and AF_UNIX.

In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.

In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region() The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region() macro to request a needed resource. A string variable that lives on the stack is then used to store a dynamically computed resource name, which is then passed on as one of the macro arguments. This can lead to undefined behavior. Depending on the current contents of the memory, the manifestations of errors may vary. One possible output may be as follows: $ cat /proc/iomem 30000000-37ffffff : 38000000-3fffffff : Sometimes, garbage may appear after the colon. In very rare cases, if no NULL-terminator is found in memory, the system might crash because the string iterator will overrun which can lead to access of unmapped memory above the stack. Thus, fix this by replacing outbound_name with the name of the previously requested resource. With the changes applied, the output will be as follows: $ cat /proc/iomem 30000000-37ffffff : memory2 38000000-3fffffff : memory3 [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info.

A flaw was found in vringh_kiov_advance in drivers/vhost/vringh.c in the host side of a virtio ring in the Linux Kernel. This issue may result in a denial of service from guest to host via zero length descriptor.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix panic during interface removal Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface]

In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Harden uretprobe syscall trampoline check Jann reported a possible issue when trampoline_check_ip returns address near the bottom of the address space that is allowed to call into the syscall if uretprobes are not set up: https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf Though the mmap minimum address restrictions will typically prevent creating mappings there, let's make sure uretprobe syscall checks for that.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix r_count dec/increment mismatch r_count is only increased when there is an oplock break wait, so r_count inc/decrement are not paired. This can cause r_count to become negative, which can lead to a problem where the ksmbd thread does not terminate.

In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing closetimeo mount option User-provided mount parameter closetimeo of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer device. When the kdump kernel runs in such a VM, loading the efifb driver may hang because of accessing the framebuffer at the wrong memory address. The scenario occurs when the hyperv_fb driver in the original kernel moves the framebuffer to a different MMIO address because of conflicts with an already-running efifb or simplefb driver. The hyperv_fb driver then informs Hyper-V of the change, which is allowed by the Hyper-V FB VMBus device protocol. However, when the kexec command loads the kdump kernel into crash memory via the kexec_file_load() system call, the system call doesn't know the framebuffer has moved, and it sets up the kdump screen_info using the original framebuffer address. The transition to the kdump kernel does not go through the Hyper-V host, so Hyper-V does not reset the framebuffer address like it would do on a reboot. When efifb tries to run, it accesses a non-existent framebuffer address, which traps to the Hyper-V host. After many such accesses, the Hyper-V host thinks the guest is being malicious, and throttles the guest to the point that it runs very slowly or appears to have hung. When the kdump kernel is loaded into crash memory via the kexec_load() system call, the problem does not occur. In this case, the kexec command builds the screen_info table itself in user space from data returned by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the new framebuffer location. This problem was originally reported in 2020 [1], resulting in commit 3cb73bc3fa2a ("hyperv_fb: Update screen_info after removing old framebuffer"). This commit solved the problem by setting orig_video_isVGA to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb driver did not try to load, and no hang occurred. But in 2024, commit c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info") effectively reverted 3cb73bc3fa2a. Commit c25a19afb81c has no reference to 3cb73bc3fa2a, so perhaps it was done without knowing the implications that were reported with 3cb73bc3fa2a. In any case, as of commit c25a19afb81c, the original problem came back again. Interestingly, the hyperv_drm driver does not have this problem because it never moves the framebuffer. The difference is that the hyperv_drm driver removes any conflicting framebuffers *before* allocating an MMIO address, while the hyperv_fb drivers removes conflicting framebuffers *after* allocating an MMIO address. With the "after" ordering, hyperv_fb may encounter a conflict and move the framebuffer to a different MMIO address. But the conflict is essentially bogus because it is removed a few lines of code later. Rather than fix the problem with the approach from 2020 in commit 3cb73bc3fa2a, instead slightly reorder the steps in hyperv_fb so conflicting framebuffers are removed before allocating an MMIO address. Then the default framebuffer MMIO address should always be available, and there's never any confusion about which framebuffer address the kdump kernel should use -- it's always the original address provided by the Hyper-V host. This approach is already used by the hyperv_drm driver, and is consistent with the usage guidelines at the head of the module with the function aperture_remove_conflicting_devices(). This approach also solves a related minor problem when kexec_load() is used to load the kdump kernel. With current code, unbinding and rebinding the hyperv_fb driver could result in the framebuffer moving back to the default framebuffer address, because on the rebind there are no conflicts. If such a move is done after the kdump kernel is loaded with the new framebuffer address, at kdump time it could again have the wrong address. This problem and fix are described in terms of the kdump kernel, but it can also occur ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: fix freeing IRQ in am65_cpsw_nuss_remove_tx_chns() When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns negative error value on error. So not NULL check is not sufficient to deteremine if IRQ is valid. Check that IRQ is greater then zero to ensure it is valid. There is no issue at probe time but at runtime user can invoke .set_channels which results in the following call chain. am65_cpsw_set_channels() am65_cpsw_nuss_update_tx_rx_chns() am65_cpsw_nuss_remove_tx_chns() am65_cpsw_nuss_init_tx_chns() At this point if am65_cpsw_nuss_init_tx_chns() fails due to k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a negative value. Then, at subsequent .set_channels with higher channel count we will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns() leading to a kernel warning. The issue is present in the original commit that introduced this driver, although there, am65_cpsw_nuss_update_tx_rx_chns() existed as am65_cpsw_nuss_update_tx_chns().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix assertion failure when splitting ordered extent after transaction abort If while we are doing a direct IO write a transaction abort happens, we mark all existing ordered extents with the BTRFS_ORDERED_IOERR flag (done at btrfs_destroy_ordered_extents()), and then after that if we enter btrfs_split_ordered_extent() and the ordered extent has bytes left (meaning we have a bio that doesn't cover the whole ordered extent, see details at btrfs_extract_ordered_extent()), we will fail on the following assertion at btrfs_split_ordered_extent(): ASSERT(!(flags & ~BTRFS_ORDERED_TYPE_FLAGS)); because the BTRFS_ORDERED_IOERR flag is set and the definition of BTRFS_ORDERED_TYPE_FLAGS is just the union of all flags that identify the type of write (regular, nocow, prealloc, compressed, direct IO, encoded). Fix this by returning an error from btrfs_extract_ordered_extent() if we find the BTRFS_ORDERED_IOERR flag in the ordered extent. The error will be the error that resulted in the transaction abort or -EIO if no transaction abort happened. This was recently reported by syzbot with the following trace: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 fail_dump lib/fault-inject.c:53 [inline] should_fail_ex+0x3b0/0x4e0 lib/fault-inject.c:154 should_failslab+0xac/0x100 mm/failslab.c:46 slab_pre_alloc_hook mm/slub.c:4072 [inline] slab_alloc_node mm/slub.c:4148 [inline] __do_kmalloc_node mm/slub.c:4297 [inline] __kmalloc_noprof+0xdd/0x4c0 mm/slub.c:4310 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] btrfs_chunk_alloc_add_chunk_item+0x244/0x1100 fs/btrfs/volumes.c:5742 reserve_chunk_space+0x1ca/0x2c0 fs/btrfs/block-group.c:4292 check_system_chunk fs/btrfs/block-group.c:4319 [inline] do_chunk_alloc fs/btrfs/block-group.c:3891 [inline] btrfs_chunk_alloc+0x77b/0xf80 fs/btrfs/block-group.c:4187 find_free_extent_update_loop fs/btrfs/extent-tree.c:4166 [inline] find_free_extent+0x42d1/0x5810 fs/btrfs/extent-tree.c:4579 btrfs_reserve_extent+0x422/0x810 fs/btrfs/extent-tree.c:4672 btrfs_new_extent_direct fs/btrfs/direct-io.c:186 [inline] btrfs_get_blocks_direct_write+0x706/0xfa0 fs/btrfs/direct-io.c:321 btrfs_dio_iomap_begin+0xbb7/0x1180 fs/btrfs/direct-io.c:525 iomap_iter+0x697/0xf60 fs/iomap/iter.c:90 __iomap_dio_rw+0xeb9/0x25b0 fs/iomap/direct-io.c:702 btrfs_dio_write fs/btrfs/direct-io.c:775 [inline] btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880 btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_pwritev fs/read_write.c:1146 [inline] __do_sys_pwritev2 fs/read_write.c:1204 [inline] __se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1281f85d29 RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148 RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29 RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003 R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328 </TASK> BTRFS error (device loop0 state A): Transaction aborted (error -12) BTRFS: error (device loop0 state A ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nvmet: Fix crash when a namespace is disabled The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled.

In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: Convert gpio_lock to raw spinlock irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208)

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix warnings during S3 suspend The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(), and the later one may call the preempt_schedule_common() function, resulting in a thread switch and causing the CPU to be in an interrupt enabled state after the enable_gpe_wakeup() function returns, leading to the warnings as follow. [ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8 [ C0] ... [ C0] Call Trace: [ C0] [<90000000002243b4>] show_stack+0x64/0x188 [ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88 [ C0] [<90000000002687e4>] __warn+0x8c/0x148 [ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0 [ C0] [<90000000016478e4>] do_bp+0x204/0x3b8 [ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000 [ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8 [ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0 [ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378 [ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388 [ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48 [ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8 [ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80 [ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98 [ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48 [ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8 [ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48 [ C0] [<9000000001646bc8>] do_vint+0x80/0xe0 [ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8 [ C0] [<900000000164e34c>] __schedule+0x314/0xa48 [ C0] [<900000000164ead8>] schedule+0x58/0xf0 [ C0] [<9000000000294a2c>] worker_thread+0x224/0x498 [ C0] [<900000000029d2f0>] kthread+0xf8/0x108 [ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4 [ C0] [ C0] ---[ end trace 0000000000000000 ]--- The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause a thread switch. Since there is no longer concurrent execution during loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes() directly in enable_gpe_wakeup(). The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()").

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: sst: Fix SST write failure 'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`")' introduced a bug where only one byte of data is written, regardless of the number of bytes passed to sst_nor_write_data(), causing a kernel crash during the write operation. Ensure the correct number of bytes are written as passed to sst_nor_write_data(). Call trace: [ 57.400180] ------------[ cut here ]------------ [ 57.404842] While writing 2 byte written 1 bytes [ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74 [ 57.418464] Modules linked in: [ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30 [ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT) [ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.444557] pc : sst_nor_write_data+0x6c/0x74 [ 57.448911] lr : sst_nor_write_data+0x6c/0x74 [ 57.453264] sp : ffff80008232bb40 [ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001 [ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000 [ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000 [ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006 [ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580 [ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4 [ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530 [ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001 [ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000 [ 57.527916] Call trace: [ 57.530354] sst_nor_write_data+0x6c/0x74 [ 57.534361] sst_nor_write+0xb4/0x18c [ 57.538019] mtd_write_oob_std+0x7c/0x88 [ 57.541941] mtd_write_oob+0x70/0xbc [ 57.545511] mtd_write+0x68/0xa8 [ 57.548733] mtdchar_write+0x10c/0x290 [ 57.552477] vfs_write+0xb4/0x3a8 [ 57.555791] ksys_write+0x74/0x10c [ 57.559189] __arm64_sys_write+0x1c/0x28 [ 57.563109] invoke_syscall+0x54/0x11c [ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0 [ 57.571557] do_el0_svc+0x1c/0x28 [ 57.574868] el0_svc+0x30/0xcc [ 57.577921] el0t_64_sync_handler+0x120/0x12c [ 57.582276] el0t_64_sync+0x190/0x194 [ 57.585933] ---[ end trace 0000000000000000 ]--- [pratyush@kernel.org: add Cc stable tag]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent connection release during oplock break notification ksmbd_work could be freed when after connection release. Increment r_count of ksmbd_conn to indicate that requests are not finished yet and to not release the connection.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix vport QoS cleanup on error When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Fix possible NPR of keep-alive thread In case vchiq_platform_conn_state_changed() is never called or fails before driver removal, ka_thread won't be a valid pointer to a task_struct. So do the necessary checks before calling kthread_stop to avoid a crash.

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc() The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ...

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated.

In the Linux kernel, the following vulnerability has been resolved: udp: Fix multiple wraparounds of sk->sk_rmem_alloc. __udp_enqueue_schedule_skb() has the following condition: if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) goto drop; sk->sk_rcvbuf is initialised by net.core.rmem_default and later can be configured by SO_RCVBUF, which is limited by net.core.rmem_max, or SO_RCVBUFFORCE. If we set INT_MAX to sk->sk_rcvbuf, the condition is always false as sk->sk_rmem_alloc is also signed int. Then, the size of the incoming skb is added to sk->sk_rmem_alloc unconditionally. This results in integer overflow (possibly multiple times) on sk->sk_rmem_alloc and allows a single socket to have skb up to net.core.udp_mem[1]. For example, if we set a large value to udp_mem[1] and INT_MAX to sk->sk_rcvbuf and flood packets to the socket, we can see multiple overflows: # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 7956736 <-- (7956736 << 12) bytes > INT_MAX * 15 ^- PAGE_SHIFT # ss -uam State Recv-Q ... UNCONN -1757018048 ... <-- flipping the sign repeatedly skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0) Previously, we had a boundary check for INT_MAX, which was removed by commit 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc"). A complete fix would be to revert it and cap the right operand by INT_MAX: rmem = atomic_add_return(size, &sk->sk_rmem_alloc); if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX)) goto uncharge_drop; but we do not want to add the expensive atomic_add_return() back just for the corner case. Casting rmem to unsigned int prevents multiple wraparounds, but we still allow a single wraparound. # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> 12 # ss -uam State Recv-Q ... UNCONN -2147482816 ... <-- INT_MAX + 831 bytes skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947) So, let's define rmem and rcvbuf as unsigned int and check skb->truesize only when rcvbuf is large enough to lower the overflow possibility. Note that we still have a small chance to see overflow if multiple skbs to the same socket are processed on different core at the same time and each size does not exceed the limit but the total size does. Note also that we must ignore skb->truesize for a small buffer as explained in commit 363dc73acacb ("udp: be less conservative with sock rmem accounting").

In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign normalized_pix_clk when color depth = 14 [WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)

In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully.

In the Linux kernel, the following vulnerability has been resolved: can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to bail out if skb cannot be allocated.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface() The documentation for usb_driver_claim_interface() says that "the device lock" is needed when the function is called from places other than probe(). This appears to be the lock for the USB interface device. The Mediatek btusb code gets called via this path: Workqueue: hci0 hci_power_on [bluetooth] Call trace: usb_driver_claim_interface btusb_mtk_claim_iso_intf btusb_mtk_setup hci_dev_open_sync hci_power_on process_scheduled_works worker_thread kthread With the above call trace the device lock hasn't been claimed. Claim it. Without this fix, we'd sometimes see the error "Failed to claim iso interface". Sometimes we'd even see worse errors, like a NULL pointer dereference (where `intf->dev.driver` was NULL) with a trace like: Call trace: usb_suspend_both usb_runtime_suspend __rpm_callback rpm_suspend pm_runtime_work process_scheduled_works Both errors appear to be fixed with the proper locking.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-tegra: Read iommu stream id from device tree Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PI ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't try to talk to a dead firmware This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command.

In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: fix potential NULL pointer dereference on udev->serial The driver assumed that es58x_dev->udev->serial could never be NULL. While this is true on commercially available devices, an attacker could spoof the device identity providing a NULL USB serial number. That would trigger a NULL pointer dereference. Add a check on es58x_dev->udev->serial before accessing it.

In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it.

In the Linux kernel, the following vulnerability has been resolved: ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw() Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier