A code injection vulnerability allows adjacent attackers to execute code in the Wifi controller of Sophos Firewall releases older than version 19.5 GA.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

A shell escape vulnerability in /webconsole/APIController in the API Configuration component of Sophos XG firewall 17.0.8 MR-8 allows remote attackers to execute arbitrary OS commands via shell metachracters in the "X-Forwarded-for" HTTP header.

The network interface configuration page (netinterface) in Sophos Web Appliance before 3.8.2 allows remote administrators to execute arbitrary commands via shell metacharacters in the address parameter.

The close_connections function in /opt/cma/bin/clear_keys.pl in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows local users to gain privileges via shell metacharacters in the second argument.

The get_referers function in /opt/ws/bin/sblistpack in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the domain parameter to end-user/index.php.

Sophos Web Appliance before 3.7.8.2 allows (1) remote attackers to execute arbitrary commands via shell metacharacters in the client-ip parameter to the Block page, when using the user_workstation variable in a customized template, and remote authenticated users to execute arbitrary commands via shell metacharacters in the (2) url parameter to the Diagnostic Tools functionality or (3) entries parameter to the Local Site List functionality.

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via functions, aka NSWA-1304.

An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA.

An arbitrary file writing vulnerability in the Secure PDF eXchange (SPX) feature of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to pre-auth remote code execution, if a specific configuration of SPX is enabled in combination with the firewall running in High Availability (HA) mode.

A remote code execution vulnerability exists in the WebAdmin of Sophos SG UTM before v9.705 MR5, v9.607 MR7, and v9.511 MR11

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A shell injection vulnerability on the Sophos Cyberoam firewall appliance with CyberoamOS before 10.6.6 MR-6 allows remote attackers to execute arbitrary commands via the Web Admin and SSL VPN consoles.

NETGEAR RAX30 UPnP Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of UPnP port mapping requests. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20429.

D-Link DIR-X3260 prog.cgi SOAPAction Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction request header provided to the prog.cgi endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20983.

A command injection vulnerability in the configuration parser of the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted GRE configuration when the cloud management mode is enabled.

The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36,  USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled.

Waybox Enel X web management application could be used to execute arbitrary OS commands and provide administrator’s privileges over the Waybox system.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the IVI plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19462.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.

WSR-1166DHP3 firmware Ver.1.16 and prior and WSR-1166DHP4 firmware Ver.1.02 and prior allow an attacker to execute arbitrary OS commands with root privileges via unspecified vectors.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior.

WRC-300FEBK, WRC-F300NF, WRC-733FEBK, WRH-300RD, WRH-300BK, WRH-300SV, WRH-300WH, WRH-H300WH, WRH-H300BK, WRH-300BK-S, and WRH-300WH-S all versions allows an unauthenticated network-adjacent attacker to execute an arbitrary OS command via unspecified vectors.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6rd function via the relay6rd parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the LAN to execute operating system (OS) commands on a vulnerable device by sending a crafted HTTP request.

An issue was discovered on D-Link DIR-802 A1 devices through 1.00b05. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A remote code execution vulnerability affecting a Valmet DNA service listening on TCP port 1517, allows an attacker to execute commands with SYSTEM privileges This issue affects: Valmet DNA versions from Collection 2012 until Collection 2021.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via the field id_email_check_btn.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the vendor_specific DHCP opcode. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12216.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The /cgi-bin/luci/admin/opsw/Dual_freq_un_apple endpoint is vulnerable to command injection through the 2.4 GHz and 5 GHz name parameters, allowing an attacker to execute arbitrary commands on the device (with root-level permissions) via crafted input.

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

Bulb Security Smartphone Pentest Framework (SPF) before 0.1.3 allows remote attackers to execute arbitrary commands via shell metacharacters in the ipAddressTB parameter to (1) remoteAttack.pl or (2) guessPassword.pl in frameworkgui/; the filename parameter to (3) CSAttack.pl or (4) SEAttack.pl in frameworkgui/; the phNo2Attack parameter to (5) CSAttack.pl or (6) SEAttack.pl in frameworkgui/; the (7) platformDD2 parameter to frameworkgui/SEAttack.pl; the (8) agentURLPath or (9) agentControlKey parameter to frameworkgui/attach2agents.pl; or the (10) controlKey parameter to frameworkgui/attachMobileModem.pl. NOTE: The hostingPath parameter to CSAttack.pl and SEAttack.pl vectors and the appURLPath parameter to attachMobileModem.pl vector are covered by CVE-2012-5878.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the Address parameter in the SetNetworkTomographySettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

The “puhttpsniff” service, which runs by default, is susceptible to command injection due to improperly sanitized user input. An unauthenticated attacker on the same network segment as the router can execute arbitrary commands on the device without authentication.

Tenda AC7 v.15.03.06.44 ate_ifconfig_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

Tenda AC7 v.15.03.06.44 ate_iwpriv_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Dreambox plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19461.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19464.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the YouTube plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19222.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Vimeo plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19463.

OS command injection vulnerability in Buffalo network devices allows an network-adjacent attacker to execute an arbitrary OS command if a specially crafted request is sent to the management page.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Generic plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19460.